Prof. Tadeusz Łagoda

Opole University of Technology, Poland

Professor

Email: [email protected]

Qualifications

1996 Ph.D., Opole University of Technology, Poland

Publications (Selected)

1. Pawliczek, R. & Głowacka, Karolina & Klemenc, Jernej & Nagode, Marko & Łagoda, Tadeusz. (2025). New possibilities for testing rubber composites: Design of the fatigue bending test. Advances in Science and Technology Research Journal. 19. 42-49. 10.12913/22998624/199888. 
2. Głowacka, Karolina & Klemenc, Jernej & Nagode, Marko & Łagoda, Tadeusz. (2025). Fatigue lifetime of rubber composites – State-of-the-art. Polymer Testing. 143. 108713. 10.1016/j.polymertesting.2025.108713. 
3. Łagoda, Tadeusz & Kurek, Marta & Małecka, Joanna. (2024). Fatigue strength under combined bending and torsion proportional loading of bronze specimens with and without geometric notch. Theoretical and Applied Fracture Mechanics. 133. 104605. 10.1016/j.tafmec.2024.104605. 
4. Małecka, Joanna & Łagoda, Tadeusz. (2024). Use of the biaxial coefficient in determining life for a combination of cyclic bending and torsion of bronze RG7. Journal of Theoretical and Applied Mechanics. 547-560. 10.15632/jtam-pl/188855. 
5. Hebda, Aleksander & Łagoda, Tadeusz & Małecka, Joanna. (2024). Investigating the effects of preliminary overloading and fatigue on the mechanical strength and fractographic characteristics of CuSn7Zn4Pb7 bronze alloy fractures. Engineering Failure Analysis. 163. 108593. 10.1016/j.engfailanal.2024.108593. 
6. Skrobacz, S. & Łagoda, Tadeusz & Krysinski, Pawel & Małys, Slawomir. (2024). Automation in welding process of aluminium alloys intended for production of door frames.. Procedia Structural Integrity. 66. 11-25. 10.1016/j.prostr.2024.11.051. 
7. Łagoda, Tadeusz & Małecka, Joanna & Małys, Slawomir & Derda, Szymon & Kuś, Juliusz & Krysinski, Pawel. (2023). Fatigue fracture cross-sections after cyclic tests with a combination of cyclic bending and torsion of samples made of aluminum alloy 6060. Eksploatacja i Niezawodnosc - Maintenance and Reliability. 26. 10.17531/ein/176203. 
8. Głowacka, Karolina & Łagoda, Tadeusz. (2023). Application of multiaxial fatigue criterion in critical plane to determine lifetime of composite laminates. Engineering Fracture Mechanics. 292. 109644. 10.1016/j.engfracmech.2023.109644. 
9. Derda, Szymon & Karolczuk, Aleksander & Robak, Grzegorz & Prażmowski, Mariusz & Paul, Henryk & Łagoda, Tadeusz & Gupta, Munish. (2023). Impact of the interface on the fatigue life of steel-based explosively welded heterostructured plates. Archives of Civil and Mechanical Engineering. 23. 10.1007/s43452-023-00731-6. 
10. Małecka, Joanna & ŻAK, Krzysztof & Łagoda, Tadeusz. (2023). Fatigue fracture surface of bronze RG7 under proportional cyclic torsion and bending. Measurement. 218. 113126. 10.1016/j.measurement.2023.113126. 
11. Małecka, Joanna & Łagoda, Tadeusz & Głowacka, Karolina & Vantadori, Sabrina. (2023). Influence of plastic deformations on both yield strength and torsional fatigue life of non‐ferrous alloys. Fatigue & Fracture of Engineering Materials & Structures. 46. 2080-2095. 10.1111/ffe.13982. 
12. Małecka, Joanna & Łagoda, Tadeusz. (2022). Fatigue and fractures of RG7 bronze after cyclic torsion and bending. International Journal of Fatigue. 168. 107475. 10.1016/j.ijfatigue.2022.107475. 
13. Głowacka, Karolina & Łagoda, Tadeusz. (2022). Fatigue lifetime of GFRP laminates in critical plane defined by equivalent normal stress. Procedia Structural Integrity. 41. 232-240. 10.1016/j.prostr.2022.05.026. 
14. Kurek M, Łagoda T. Fatigue damage cumulation in materials under random loading based on an energy model. Fatigue Fract Eng Mater Struct. 2021; 44: 1114–1124. https://doi.org/10.1111/ffe.13387
15. Łagoda, T., Głowacka, K., Kurek, M., & Skibicki, D. (2021). Formulation of Strain Fatigue Criterion Based on Complex Numbers. Materials, 14(5), 1227. https://doi.org/10.3390/ma14051227
16. Łagoda, T.; Głowacka, K.; Kurek, M.; Skibicki, D. Formulation of Strain Fatigue Criterion Based on Complex Numbers. Materials 2021, 14, 1227. https://doi.org/10.3390/ma14051227
17. Łagoda, T., Głowacka, K., & Kurek, A. (2020). Fatigue Life of Aluminum Alloys Based on Shear and Hydrostatic Strain. Materials, 13(21), 4850. https://doi.org/10.3390/ma13214850
18. Blacha, Ł., Małecka, J., & Łagoda, T. (2020). Incorporation of Corrosion Effects into the Life-Cycle Analysis of AW-2017A-T4 Aluminium Alloy under Bending Moment. Materials, 13(17), 3681. https://doi.org/10.3390/ma13173681
19. Kurek, A., Koziarska, J., & Łagoda, T. (2020). The Influence of the Strain and Stress Gradient in Determining Strain Fatigue Characteristics for Oscillatory Bending. Materials, 13(1), 173. https://doi.org/10.3390/ma13010173
20. Böhm, E., Kurek, M., and Łagoda, T. (2019). "Fatigue Damage Accumulation Model of 6082-T6 Aluminum Alloy in Conditions of Block Bending and Torsion." ASTM International. J. Test. Eval.. November 2020; 48(6): 4416–4434. https://doi.org/10.1520/JTE20170598

Profile Details

https://scholar.google.com/citations?hl=zh-CN&user=Q4csUfsAAAAJ