Prof. Xiaodong Li

Department of Mechanical Engineering

University of Virginia, USA

Email: [email protected]

Qualifications

1996   Postdoc., Ohio State University, Mechanical Engineering
1993 Ph.D., Harbin Institute of Technology, Materials Science and Engineering
1988 M.S., Harbin Institute of Technology, Materials Science and Engineering
1985 B.S., Harbin Shipbuilding Engineering Institute, Mechanical Engineering

1. Yin, K., Wu, W. Y., Chen, X. Y., et al. (2026). Microreactor Preparation of RDX/FOX-7 Composite Explosives With Better Safety Performance and Performance Characterization. Propellants, Explosives, Pyrotechnics, 51(2), Article e70092.
2. Guo, J. B., Liu, W. J., Fu, X. J., et al. (2026). Preparation and Performance Study of High-Energy RDX/ZrH2/F2602 Energetic Composite Particles with Enhanced Safety. Combustion Science and Technology, 198(14), 5530–5547.
3. Wu, W. Y., Song, C. G., Yin, K., et al. (2026). Construction of self-assembled energetic microspheres with improved interfacial effect for enhanced safety. Powder Technology, 468, Article 121692.
4. Kang, P. L., Song, C. G., Guo, J. B., et al. (2026). Preparation of HMX/TiH2/F high-energy composite microspheres with high safety and energy performance. Fuel, 404, Article 136261.
5. Chen, X. Y., Wu, W. Y., Yin, K., et al. (2025). Construction of HMX microcapsules with double cross-linked gel networks: enhancing thermal stability and safety. Journal of Energetic Materials. Advance online publication.
6. Kang, P. L., Guo, J. B., Fu, X. J., et al. (2025). TiH2 content-tuning strategy for synergistic enhancement of safety and combustion performance in HMX/TiH2/F composite microspheres. International Journal of Hydrogen Energy, 183, Article 151867.
7. Kang, P. L., Song, C. G., Cai, F. Z., et al. (2025). Preparation of HMX/TATB high-energy composite particles with high safety by coaxial flow focusing microdroplet method and study of their properties. Materials Today Chemistry, 48, Article 102902.
8. Pan, C. L., Liu, Z. H., Zhao, Y. B., et al. (2025). Study on the reaction kinetics mechanism and properties of RDX/ADN/FKM2602 composite microspheres. Defence Technology, 48, 131–140.
9. Wu, W. Y., Fan, D. Q., Fu, X. J., et al. (2025). Modulation of composite energetic microunit structure and performance: Synergistic effects of microdroplets and binders. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 717, Article 136810.
10. Wu, W. Y., Liu, W. J., Fu, X. J., et al. (2025). Construction of HMX/FOX-7 composite microspheres with controlled microstructures using continuous self-assembly spray drying: To improve safety and combustion performance. Materials Chemistry and Physics, 339, Article 130795.
11. Kang, P. L., Liu, W. J., Wu, W. Y., et al. (2025). Morphology control and crystal structure and properties analysis of FOX-7/HMX composite crystals prepared by rotary evaporation method. Particuology, 98, 1–12.
12. Wu, W. Y., Liu, W. J., Li, M. J., et al. (2025). Preparation of microstructure controlled spherical co-aggregated composite energetic materials: Synergistic enhancement of safety and thermal stability of CL-20. Powder Technology, 453, Article 120634.
13. Wu, W. Y., Li, X. D., Liu, W. J., et al. (2024). Fabrication and performance characterization of NTO/HMX spherical composite explosives with improved safety performance. Propellants, Explosives, Pyrotechnics, 49(9), Article e202400079.
14. Brown, K. R., Love-Baker, C., Xue, Z., et al. (2024). Ultra-high molecular weight polyethylene micro-ribbon fibers gel spun using orange terpenes. Polymer Engineering and Science, 64(4), 1743–1755.
15. Xiao, L., Li, B., Bu, H., et al. (2024). Effects of energy director types on the interface morphology and tensile properties of ultrasonically welded CF/PAEK joints. Applied Composite Materials, 31(3), 865–880.
16. Zhu, W., Huang, Q., Li, X., et al. (2024). Comparison of microstructure and thermal-fluid coupling heat transfer behavior of strip-cast Nd-Fe-B flakes at different cooling roller speeds. Journal of Alloys and Compounds, 977, Article 173453.
17. Fan, Y., Xu, X., Tao, R., et al. (2024). Experimental investigation of current intensity and feed speed in electrically assisted necking and thickening of 5A02 aluminum alloy tubes. Materials, 17(4), Article 771.
18. Burden, D. E., Harrell, T. M., Bumgardner, C. H., et al. (2024). Unveiling fracture mechanics of a curved coating/substrate system by combined digital image correlation and numerical finite element analyses. Engineering Fracture Mechanics, 296, Article 109827.
19. Li, X., Bu, H., Wang, F., et al. (2024). Numerical simulation and experimental verification of temperature field in induction welding process of CFRTP L-shaped stringer and skin based on magneto-thermal coupling. The International Journal of Advanced Manufacturing Technology, 130(9–10), 4341–4357.
20. Zhai, H., Chang, Y., Li, X., et al. (2024). Numerical simulation studies of jet rapid solidification technology for magnetic materials: A review. The International Journal of Advanced Manufacturing Technology, 130(5–6), 2635–2647.
21. Zhai, H., Li, X., Xiong, X., et al. (2024). A method combining optimization algorithm and inverse-deformation design for improving the injection quality of box-shaped parts. The International Journal of Advanced Manufacturing Technology, 130(3–4), 1969–1985.
22. Li, X., Zhou, Y., Kamiyama, S., et al. (2024). Intrinsically conductive resin as a functional repair for ECF/CFRP against simulated lighting strike: An experimental study. Composites Part A: Applied Science and Manufacturing, 177, Article 107933.