1. Tuyel, A. U., Oner, E. T., & Oktar, F. N. (2026). Cost-effective ultrasonic and hydrothermal assisted synthesis of biphasic calcium phosphate sub-micron powders with adjustable phase composition from Venus verrucosa nacre. Journal of the Australian Ceramic Society, 62(3), 475–488.
2. Duta, L., & Oktar, F. N. (2024). Synthetic and biological-derived hydroxyapatite implant coatings. Coatings, 14(1), Article 39.
3. Mahmutoglu, G., Topsakal, A., Altan, E., et al. (2023). Effects of temperature and pH on the synthesis of nanohydroxyapatite powders by chemical precipitation. Journal of the Australian Ceramic Society, 59(5), 1433–1441.
4. Gavinho, S. R., Bozdag, M., Kalkandelen, C., et al. (2023). An eco-friendly process to extract hydroxyapatite from sheep bones for regenerative medicine: Structural, morphologic and electrical studies. Journal of Functional Biomaterials, 14(5), Article 279.
5. Cesur, S., Ilhan, E., Pilavci, E., et al. (2023). A novel strategy as a potential rapid therapy modality in the treatment of corneal ulcers: Fluconazole/vancomycin dual drug-loaded nanofibrous patches. Macromolecular Materials and Engineering, 308(5), Article 2200697.
6. Dorcioman, G., Grumezescu, V., Stan, G. E., et al. (2023). Hydroxyapatite thin films of marine origin as sustainable candidates for dental implants. Pharmaceutics, 15(4), Article 1294.
7. Oktar, F. N., Unal, S., Gunduz, O., et al. (2023). Marine-derived bioceramics for orthopedic, reconstructive and dental surgery applications (10.1007/s41779-022-00813-3, 2022). Journal of the Australian Ceramic Society, 59(1), Article 267.
8. Duta, L., Stan, G. E., Popescu-Pelin, G., et al. (2022). Influence of post-deposition thermal treatments on the morpho-structural, and bonding strength characteristics of lithium-doped biological-derived hydroxyapatite coatings. Coatings, 12(12), Article 1883.
9. Oktar, F. N., Unal, S., Gunduz, O., et al. (2023). Marine-derived bioceramics for orthopedic, reconstructive and dental surgery applications. Journal of the Australian Ceramic Society, 59(1), 57–81.
10. Ilhan, E., Cesur, S., Sulutas, R. B., et al. (2022). The role of multilayer electrospun poly(vinyl alcohol)/gelatin nanofibers loaded with fluconazole and cinnamaldehyde in the potential treatment of fungal keratitis. European Polymer Journal, 176, Article 111390.
11. Seyhan, S. A., Alkaya, D. B., Cesur, S., et al. (2022). Preparation and characterization of pure natural hydroxyapatite derived from seashells for controlled drug delivery. Journal of the Australian Ceramic Society, 58(4), 1231–1240.
12. Saylam, E., Akkaya, Y., Ilhan, E., et al. (2021). Levodopa-loaded 3D-printed poly (lactic) acid/chitosan neural tissue scaffold as a promising drug delivery system for the treatment of Parkinson's disease. Applied Sciences, 11(22), Article 10727.
13. Guler, E., Baripoglu, Y. E., Alenezi, H., et al. (2021). Vitamin D3/vitamin K2/magnesium-loaded polylactic acid/tricalcium phosphate/polycaprolactone composite nanofibers demonstrated osteoinductive effect by increasing Runx2 via Wnt/β-catenin pathway. International Journal of Biological Macromolecules, 190, 244–258.
14. Ilhan, E., Ulag, S., Sahin, A., et al. (2021). Fabrication of tissue-engineered tympanic membrane patches using 3D-printing technology. Journal of the Mechanical Behavior of Biomedical Materials, 114, Article 104219.
15. Popescu-Pelin, G., Ristoscu, C., Duta, L., et al. (2020). Fish bone derived bi-phasic calcium phosphate coatings fabricated by pulsed laser deposition for biomedical applications. Marine Drugs, 18(12), Article 623.
16. Unal, S., Arslan, S., Yilmaz, B. K., et al. (2021). Production and characterization of bacterial cellulose scaffold and its modification with hyaluronic acid and gelatin for glioblastoma cell culture. Cellulose, 28(1), 117–132.
17. Ilhan, E., Cesur, S., Guler, E., et al. (2020). Development of Satureja cuneifolia-loaded sodium alginate/polyethylene glycol scaffolds produced by 3D-printing technology as a diabetic wound dressing material. International Journal of Biological Macromolecules, 161, 1040–1054.
18. Duta, L., Neamtu, J., Melinte, R. P., et al. (2020). In vivo assessment of bone enhancement in the case of 3D-printed implants functionalized with lithium-doped biological-derived hydroxyapatite coatings: A preliminary study on rabbits. Coatings, 10(10), Article 992.
19. Cakmak, A. M., Unal, S., Sahin, A., et al. (2020). 3D printed polycaprolactone/gelatin/bacterial cellulose/hydroxyapatite composite scaffold for bone tissue engineering. Polymers, 12(9), Article 1962.
20. Mutlu, E. C., Yildirim, A. B., Yildirm, M., et al. (2020). Improvement of antibacterial and biocompatibility properties of electrospray biopolymer films by ZnO and MCM-41. Polymer Bulletin, 77(7), 3657–3675.
21. Ulag, S., Ilhan, E., Sahin, A., et al. (2020). 3D printed artificial cornea for corneal stromal transplantation. European Polymer Journal, 133, Article 109744.
22. Cesur, S., Oktar, F. N., Ekren, N., et al. (2020). Preparation and characterization of electrospun polylactic acid/sodium alginate/orange oyster shell composite nanofiber for biomedical application. Journal of the Australian Ceramic Society, 56(2), 533–543.

Profile Details

https://bioe-eng.marmara.edu.tr/en/academics
https://nbuam.marmara.edu.tr/ekibimiz/emekli-arastirmacilarimiz
https://www.researchgate.net/profile/Faik-Oktar/3

WOS ResearcherID: DJJ-5010-2022