Prof. J. Paulo Davim

Department of Mechanical Engineering

University of Aveiro, Portugal

Professor of Mechanical Engineering

Email: [email protected]

Qualifications

2013 D.Sc., London Met University, UK

1997 Ph.D., Mechanical Eng., University of Porto (FEUP), Portugal

1991 M.Sc., Mechanical Eng., University of Porto (FEUP), Portugal

1986 B.Sc., Mechanical Eng., University of Porto (FEUP), Portugal

Publications (Selected)

1. C Veiga, JP Davim, AJR Loureiro, Properties and applications of titanium alloys: a brief review, Rev. Adv. Mater. Sci, 2012, 32(2), 133-148
2. AM Abrao, PE Faria, JCC Rubio, P Reis, JP Davim, Drilling of fiber reinforced plastics: A review, Journal of Materials Processing Technology, 2007, 186(1-3), 1-7
3. JP Davim, P Reis, Study of delamination in drilling carbon fiber reinforced plastics (CFRP) using design experiments, Composite Structures, 2003, 59(4), 481-487
4. JP Davim, JC Rubio, AM Abrao, A novel approach based on digital image analysis to evaluate the delamination factor after drilling composite laminates, Composites Science and Technology, 2007, 67(9), 1939-1945
5. JP Davim, Machining: fundamentals and recent advances, Springer Science & Business Media, 2008
6. JP Davim, Ed., Surface Integrity in Machining, Springer Verlag, 2010
7. K Shirvanimoghaddam, SU Hamim, MK Akbari, SM Fakhrhoseini, Carbon fiber reinforced metal matrix composites: Fabrication processes and properties, Composites Part A: Applied Science and Manufacturing, 2017, 92, 70-96
8. JP Davim, P Reis, CC Antonio, Experimental study of drilling glass fiber reinforced plastics (GFRP) manufactured by hand lay-up, Composites Science and Technology, 2004, 64(2), 289-297
9. VN Gaitonde, SR Karnik, JC Rubio, AE Correia, AM Abrão, JP Davim, Analysis of parametric influence on delamination in high-speed drilling of carbon fiber reinforced plastic composites, Journal of Materials Processing Technology, 2008, 203(1-3), 431-438
10. JP Davim, Ed., Machining of hard materials, Springer Verlag, 2011
11. JP Davim, P Reis, Drilling carbon fiber reinforced plastics manufactured by autoclave—experimental and statistical study, Materials & Design, 2003, 24(5), 315-324
12. V Krishnaraj, A Prabukarthi, A Ramanathan, N Elanghovan, MS Kumar, Optimization of machining parameters at high speed drilling of carbon fiber reinforced plastic (CFRP) laminates, Composites Part B: Engineering, 2012, 43(4), 1791-1799
13. SR Karnik, VN Gaitonde, JC Rubio, AE Correia, AM Abrão, JP Davim, Delamination analysis in high speed drilling of carbon fiber reinforced plastics (CFRP) using artificial neural network model, Materials & Design, 2008, 29(9), 1768-1776
14. JP Davim, P Reis, Damage and dimensional precision on milling carbon fiber-reinforced plastics using design experiments, Journal of Materials Processing Technology, 2005, 160(2), 160-167
15. JP Davim, Design of optimisation of cutting parameters for turning metal matrix composites based on the orthogonal arrays, Journal of Materials Processing Technology, 2003, 132(1-3), 340-344
16. S Basavarajappa, G Chandramohan, JP Davim, Application of Taguchi techniques to study dry sliding wear behaviour of metal matrix composites, Materials & Design, 2007, 28(4), 1393-1398
17. AM Abrao, JCC Rubio, PE Faria, JP Davim, The effect of cutting tool geometry on thrust force and delamination when drilling glass fibre reinforced plastic composite, Materials & Design, 2008, 29(2), 508-513
18. JP Davim, A note on the determination of optimal cutting conditions for surface finish obtained in turning using design of experiments, Journal of Materials Processing Technology, 2001, 116(2-3), 305-308
19. JC Rubio, AM Abrao, PE Faria, AE Correia, JP Davim, Effects of high speed in the drilling of glass fibre reinforced plastic: evaluation of the delamination factor, International Journal of Machine Tools and Manufacture, 2008, 48(6), 715-720
20. RV Rao, JP Davim, A decision-making framework model for material selection using a combined multiple attribute decision-making method, The International Journal of Advanced Manufacturing Technology, 2008, 35, 751-760

Profile Details:

https://scholar.google.pt/citations?hl=pt-PT&user=EqJnB5EAAAAJ&view_op=list_works&is_public_preview=1/span>

Web of Science ResearcherID: D-2314-2009