Ibrahim M. Alarifi

Majmaah University, Saudi Arabia

Assistant Professor

Email: [email protected]

Research fields

Materials Science

Biomaterials

Nanotechnology

Carbon Fibers

Polymers and Composites

Qualifications

2017 Ph.D., Wichita State University, USA

2016 M.Sc., Southern Methodist University, USA

2010 M.Sc., Eastern Michigan University, USA

2008 B.Sc., University of Toledo, USA

Publications (Selected)

1. Tahir, S., Saba, T., Farhan, A., et al. (2026). Conducting polymer-metal vanadate composites: promising materials for next-gen energy & environmental solutions. Journal of Materials Science-Materials in Electronics, 37(9), Article 646.
2. Mohit, H., Krishna, V. V. V., Sanjay, M. R., et al. (2025). Thermal-mechanical characteristics of groundnut shell/ ATH/ Si/ SiC ceramic particulates reinforced glass fiber-epoxy hybrid composites. Journal of Materials Research and Technology-JMR&T, 37, 3924–3940.
3. Aboamer, M. A., Hakami, A., Algethami, M., et al. (2025). Sustainable Medical Materials: AI-Driven Assessment for Mechanical Performance of UVC-Treated Date Palm Epoxy Composites. Polymers, 17(8), Article 1125.
4. Mohit, H., Krishna, V. V. V., Sanjay, M. R., et al. (2025). Multi-criteria and CNN analysis of Al2O3/TiO2/egg shell/ATH ceramic fillers in glass fiber-epoxy composites. Journal of Materials Research and Technology-JMR&T, 36, 1324–1348.
5. Alarifi, I. M. (2024). Simulation and mechanical testing of 3D printing shin guard composite materials. Virtual and Physical Prototyping, 19(1), Article e2411022.
6. Alarifi, I. M. (2024). Revolutionising fabrication advances and applications of 3D printing with composite materials: a review. Virtual and Physical Prototyping, 19(1), Article e2390504.
7. Alarifi, M. I., & Alarifi, I. M. (2023). Comprehensive structural evaluation of composite materials in 3D-printed shin guards. Journal of Materials Research and Technology-JMR&T, 27, 6912–6923.
8. Mohit, H., Sanjay, M. R., Siengchin, S., et al. (2023). Predicting physico-mechanical and thermal properties of loofa cylindrica fibers and Al2O3/Al-SiC reinforced polymer hybrid composites using artificial neural network techniques. Construction and Building Materials, 409, Article 133901.
9. Mohit, H., Sanjay, M. R., Siengchin, S., et al. (2024). Machine learning-based prediction of mechanical and thermal properties of nickel/cobalt/ferrous and dried leaves fiber-reinforced polymer hybrid composites. Polymer Composites, 45(1), 489–506.
10. Farhan, A., Zahid, M., Tahir, N., et al. (2023). Investigation of boron-doped graphene oxide anchored with copper sulphide flowers as visible light active photocatalyst for methylene blue degradation. Scientific Reports, 13(1), Article 9497.
11. Yeshanew, E. S., Ahmed, G. M. S., Sinha, D. K., et al. (2023). Experimental investigation and crashworthiness analysis of 3D printed carbon PA automobile bumper to improve energy absorption by using LS-DYNA. Advances in Mechanical Engineering, 15(6), Article 16878132231181058.
12. Alarifi, I. M. (2023). Evaluation of a design for a three-dimensional-printed artificial bone structure. Polymer Composites, 44(12), 8240–8252.
13. Alarifi, I. M. (2023). PETG/carbon fiber composites with different structures produced by 3D printing (vol 120, 107949, 2023). Polymer Testing, 123, Article 108045.
14. Nimbagal, V., Banapurmath, N. R., Umarfarooq, M. A., et al. (2023). Mechanical and fracture properties of carbon nano fibers/short carbon fiber epoxy composites. Polymer Composites, 44(7), 3977–3989.
15. Yassin, M., Shahapurkar, K., Chenrayan, V., et al. (2023). Investigation of tensile and flexural properties of habesha moringa-bamboo fiber reinforced epoxy hybrid composite. Polymer Composites, 44(7), 4121–4133.
16. Selman, K., Shahapurkar, K., Chenrayan, V., et al. (2023). Flexural and tensile behavior of Kulkual fiber and TiB2 particles reinforced epoxy composites. Polymer Composites, 44(7), 4142–4154.
17. Alarifi, I. M. (2023). A Review on Factors Affecting Machinability and Properties of Fiber-Reinforced Polymer Composites. Journal of Natural Fibers, 20(1), Article 2154304.
18. Chenrayan, V., Vaishnav, V., Shahapurkar, K., et al. (2023). Tribological performance of TiB2-graphene Al 7075 hybrid composite processed through squeeze casting: At room and high temperature. Tribology International, 185, Article 108486.
19. Almushaikeh, A. M., Alaswad, S. O., Alsuhybani, M. S., et al. (2023). Manufacturing of carbon fiber reinforced thermoplastics and its recovery of carbon fiber: A review. Polymer Testing, 122, Article 108029.
20. Alarifi, I. M. (2023). PETG/carbon fiber composites with different structures produced by 3D printing. Polymer Testing, 120, Article 107949.

Profile Details
https://www.mu.edu.sa/sites/default/files/content/2020/02/Ibrahim%20M%20Alarifi.pdf
https://scholar.google.com/citations?user=BXPjmikAAAAJ&hl=en
https://www.researchgate.net/profile/Ibrahim-Alarifi-2

WOS ResearcherID: ABE-6127-2020