Biography

Dr. Pandu Ranga Vundavilli

IIT Bhubaneswar Odisha, India


Email: [email protected], [email protected]


Qualifications

2006 Ph.D., Department of Mechanical Engineering, Indian Institute of Technology Kharagpur, India

2001 M. Tech., National Institute of Technology Warangal, India

1996 B. Tech., College of Engineering, Jawaharlal Nehru Technological University, Kakinada, India


Publications (Selected)

Books, Book Chapters, Dissertation

  1. Ravi Kumar Mandava, and Pandu R. Vundavilli, Design of near-optimal trajectories for the biped robot using MCIWO algorithm, Soft Computing for Problem Solving Vol. I, Advances in Intelligent Systems and Computing 817, Edited by J.C. Bansal et al. pp. 355-364, 2019, Springer.
  2. Ravi Kumar Mandava, Sukesh Bondada and Pandu R. Vundavilli, An optimized path planning for the mobile robot using potential field method and PSO algorithm, Soft Computing for Problem Solving Vol I, Advances in Intelligent Systems and Computing 817, Edited by J.C. Bansal et al. pp. 139-150, 2019, Springer.
  3. Ravi Kumar Mandava and Pandu R Vundavilli, “Design of Neural Network based PID Controller while Walking on Stair Case Ascending & Descending Surfaces”, Advanced Mathematical Techniques in Engineering Sciences, Chapter 12, pp. 227-246, 2018, Edited by Mangey Ram and J. Paulo Davim, CRC Press.
  4. D.K. Pratihar, Pandu R. Vundavilli, Rega Rajendra, Humanoid body control using neural networks and fuzzy logic, Humanoid Robotics: A reference, Edited by A. Goswami and P. Vadakkepat, pp. 1-25, 2017, Springer Verlag, Germany.
  5. Ravi Kumar M, Pandu R. Vundavilli, Study on influence of hip trajectory on the balance of a biped robot, Emerging Trends in Electrical, Communications and Information Technologies, Edited by K.R. Attele et al., Published by LNEE, Vol. 394, pp. 265-272, 2017.

Journals

  1. Venkatesh, V. S. S., Manohar, G., Vundavilli, P. R., Mahapatra, M. M., Goyal, A., & Bhowmik, A. (2025). Extraction of kaolin and tribo informative analysis of the Al-kaolin composite through machine learning approaches. Scientific Reports, 15(1), 13370.
  2. Venkatesh, V. S. S., Vundavilli, P. R., & Mahapatra, M. M. (2025). Synergistic effect of sintering temperature on microstructure, mechanical properties, and fractography analysis of spark plasma sintered Al-10% SiC-4% Kaoline composite. Materials Letters, 378, 137625.
  3. Pant, S., Prakash, A., Vundavilli, P. R., Khadanga, K. C., Kuila, A., Aminabhavi, T. M., & Garlapati, V. K. (2024). Concomitant inhibitor-tolerant cellulase and xylanase production towards sustainable bioethanol production by Zasmidiumcellare CBS 146.36. Fuel, 375, 132593.
  4. Samal, P., Khadanga, K. C., Surekha, B., & Vundavilli, P. R. (2024). Parametric modeling of resin-bonded sand mold systems using machine learning-based approaches. Engineering Research Express, 6(3), 035422.
  5. Mishra, A., Anitescu, C., Budarapu, P. R., Natarajan, S., Vundavilli, P. R., & Rabczuk, T. (2024). An artificial neural network based deep collocation method for the solution of transient linear and nonlinear partial differential equations. Frontiers of Structural and Civil Engineering, 18(8), 1296-1310.
  6. Chauhan, D. K. S., & Vundavilli, P. R. (2024). Design of computer vision assisted machine learning based controller for the Stewart platform to track spatial objects. Frontiers of Structural and Civil Engineering, 18(8), 1195-1208.
  7. Sahoo, P. S., Mahapatra, M. M., Vundavilli, P. R., & Pandey, C. (2024). Effects of working temperature on microstructure and hardness of Ti-6Al-4V alloy subjected to asymmetrical rolling. Journal of Materials Engineering and Performance, 33(3), 1218-1228.
  8. Samal, P., & Vundavilli, P. R. (2023). Dry sliding wear performances of AA5052 hybrid composite brake disc materials reinforced with in situ synthesized TiC and multi-walled carbon nanotube. Journal of Tribology, 145(10), 101705.
  9. Sahoo, P. S., Mahapatra, M. M., Vundavilli, P. R., Sabat, R. K., Sirohi, S., & Kumar, S. (2023). Investigation of severe plastic deformation effects on magnesium RZ5 alloy sheets using a modified multi-pass equal channel angular pressing (ECAP) technique. Materials, 16(14), 5158.
  10. Sahoo, P. S., Meher, A., Mahapatra, M. M., Vundavilli, P. R., & Pandey, C. (2023). Analysis of mechanical and microstructural characteristics of plunger-assisted ECAP strengthened Ti-6Al-4V alloy sheets. Archives of Civil and Mechanical Engineering, 23(3), 194.
  11. Samal, P., Vundavilli, P. R., Meher, A., & Mahapatra, M. M. (2023). Processing and Characterization of Aluminum Metal Matrix Composites by Stir Casting with Carbide Reinforcement. In Metal Matrix Composites (pp. 1-15). CRC Press.
  12. Samal, P., Tarai, H., Meher, A., Surekha, B., & Vundavilli, P. R. (2023). Effect of SiC and WC reinforcements on microstructural and mechanical characteristics of copper alloy-based metal matrix composites using stir casting route. Applied Sciences, 13(3), 1754.
  13. Biswal, H. J., Vundavilli, P. R., Mondal, K., Shetti, N. P., & Gupta, A. (2023). ZnO/CuO nanostructures anchored over Ni/Cu tubular films via pulse electrodeposition for photocatalytic and antibacterial applications. Materials Science for Energy Technologies, 6, 237-251.
  14. Varma, V. S., Rao, R. Y., Vundavilli, P. R., Pandit, M. K., & Budarapu, P. R. (2022). A machine learning-based approach for the design of lower limb exoskeleton. International Journal of Computational Methods, 19(08), 2142012.
  15. Chauhan, D. K. S., & Vundavilli, P. R. (2022). Forward kinematics of the Stewart parallel manipulator using machine learning. International Journal of Computational Methods, 19(08), 2142009.
  16. Sahoo, P. S., Meher, A., Mahapatra, M. M., & Vundavilli, P. R. (2022). Understanding the fabrication of ultrafine grains through severe plastic deformation techniques: an overview. Jom, 74(10), 3887-3909.


Profile Details

https://old.iitbbs.ac.in/profile.php/pandu/

https://scholar.google.com/citations?user=w4OjFYkAAAAJ&hl=en

https://www.researchgate.net/profile/Pandu-Vundavilli

SCIRP Newsletter
Copyright © 2006-2026 Scientific Research Publishing Inc. All Rights Reserved.
Top