Prof. Young Min Kim

Environment & Energy Mechanical Engineering

Korea University of Science and Technology, South Korea

Email: [email protected]

Qualifications

2012 Ph.D., Laboratory for Industrial Energy Systems (LENI), Swiss Federal Institute of Technology Lausanne (EPFL)

1996 M.Sc., Mechanical Engineering, Korea Advanced Institute of Science and Technology (KAIST)

1994 B.Sc., Mechanical Engineering, Korea Advanced Institute of Science and Technology (KAIST)

Publications (Selected)

1. Lee, D. H., Jung, S. J., Suh, B. C., Kim, Y. M., Kwak, R. H., Park, S. M., ... & Ha, T. (2025). A study on first hydrogenation mechanism and microstructural features of hyper-eutectic Mg–Ni hydrogen storage alloy. International Journal of Hydrogen Energy, 120, 110-118.
2. Jung, S. J., Sohn, S. S., Lee, D. H., Ko, W. S., Ha, T. J., Kwak, R. H., ... & Park, H. K. (2025). Study on the correlation between microstructural evolution and hydrogen storage properties in hyper-eutectic Mg-xNi (x= 15, 20, 25) alloys. Journal of Materials Research and Technology, 35, 2068-2074.
3. Yoon, M. S., Hur, J., Park, S. H., Lee, U. J., Xu, G., Park, H. K., ... & Ko, W. S. (2024). Role of solute elements in Mg-Mg2Ni hydrogen storage alloys: A first-principles calculation study. Journal of Magnesium and Alloys, 12(11), 4574-4593.
4. Kim, H. J., Lee, J. Y., Jin, S. C., Bae, J. H., Kim, Y. M., Yu, H., & Park, S. H. (2024). Effect of extrusion conditions on microstructural characteristics and mechanical properties of SEN6 magnesium alloy. Journal of Materials Research and Technology, 31, 4019-4028.
5. Lee, W. G., Go, Y., Kim, J. Y., Sun, S. J., Lim, J. Y., You, B. S., ... & Kim, Y. M. (2024). Effect of welding conditions on weld zone temperature and mechanical properties of friction stir welded AZ61 magnesium alloy sheet. Metals and Materials International, 30(10), 2853-2870.
6. Jo, S., Lee, G. M., Lee, J. U., Kim, Y. M., & Park, S. H. (2024). Effect of characteristics and distribution of Mg17Al12 precipitates on tensile and bending properties of high-Al-containing Mg alloys. Journal of Magnesium and Alloys, 12(2), 779-793.
7. Lee, J. S., Xu, G., Suh, J. S., Bae, J. H., Suh, B. C., Kim, Y. M., ... & Lee, B. J. (2024). Atomistic investigation into the formation of axial weak twins during the compression of single-crystal Mg nanopillars. Acta Materialia, 263, 119512.
8. Kim, H. J., Lee, G. M., Kim, Y. M., Bae, J. H., Yu, H., & Park, S. H. (2023). Microstructural characteristics and bending properties of extruded SEN9 and SEN11 magnesium sheets. Journal of Materials Research and Technology, 27, 7787-7794.
9. Suh, J. S., Kim, Y. M., Yim, C. D., Suh, B. C., Bae, J. H., & Lee, H. W. (2023). Interpretable machine learning-based analysis of mechanical properties of extruded Mg-Al-Zn-Mn-Ca-Y alloys. Journal of Alloys and Compounds, 968, 172007.
10. Lee, W. H., Kim, S. C., Kim, S. H., Yoon, J. H., Moon, K. H., Cheon, S. H., ... & Chung, B. I. (2023). Docetaxel enhances tumor necrosis factor-related apoptosis-inducing ligand-mediated apoptosis in prostate cancer cells via epigenetic gene regulation by enhancer of Zeste Homolog 2. The World Journal of Men's Health, 41(3), 649.
11. Li, L., Suh, B. C., Suh, J. S., Kim, C., Go, Y., & Kim, Y. M. (2023). Static recrystallization behavior of the cold-rolled Mg-1Al-1Zn-0.1 Ca-0.2 Y magnesium alloy sheet. Journal of Alloys and Compounds, 938, 168508.
12. Suh, J. S., Suh, B. C., Bae, J. H., & Kim, Y. M. (2023). Machine learning-based design of biodegradable Mg alloys for load-bearing implants. Materials & Design, 225, 111442.
13. Kim, H. J., Kim, Y. M., Bae, J. H., Yoon, J., & Park, S. H. (2023). Aging hardening and precipitation characteristics of extruded Mg–9Al–0.8 Zn–0.2 Mn–0.3 Ca–0.2 Y alloy. Metals and Materials International, 29(2), 381-389.
14. Li, L., Go, Y., Suh, J. S., Suh, B. C., & Kim, Y. M. (2022). Effects of the Al content on the evolution of quadruple basal textures in Mg-xAl-1Zn-0.1 Mn-0.1 Ca-0.2 Y alloy sheets processed via cold rolling and annealing. Metals, 12(3), 499.
15. Kim, Y. J., Kim, Y. M., Bae, J. H., Joo, S. H., & Park, S. H. (2023). Microstructural characteristics and low-cycle fatigue properties of AZ91 and AZ91–Ca–Y alloys extruded at different temperatures. Journal of Magnesium and Alloys, 11(3), 892-902.
16. Suh, J. S., Suh, B. C., Bae, J. H., & Kim, Y. M. (2023). Machine learning-based design of biodegradable Mg alloys for load-bearing implants. Materials & Design, 225, 111442.

Profile Details

https://sciprofiles.com/profile/28953

https://www.researchgate.net/profile/Young-Kim-84