Dr. Moola Mohan Reddy

Curtin University, Malaysia

Associate Professor

Email: [email protected]

Qualifications

2013 Ph.D., Machining of Advanced ceramics, Curtin University

1999 M.Tech., Mechanical system dynamics and control, IIT, Kharagpur, India

1996 B.Sc., Mechanical engineering from Institution of Engineers

Publications (Selected)

1. Tiwari, S., Ishtiaq, M., Yeddula, N., et al. (2026). Modeling Hardness in Industrial C–Mn Cast Steels with Neural Network Models. Transactions of the Indian Institute of Metals, 79(6), 89.
2. Malik, H. M., Moola, M. R., Abdullah, A. H., et al. (2026). Study on the Influence Study on the Influence of TiAlN and AlTiN coated Carbide Tools and Cutting Parameters for the dry machining of Inconel 718. Journal of Physics: Conference Series, 3196(1), 012008.
3. Chen, K. W., Reddy, M. M., Abdullah, A. H., et al. (2026). Analysing the modulus of rigidity for various thread materials using trifilar suspension method. Journal of Physics: Conference Series, 3196(1), 012041.
4. Wong, D., Debnath, S., Anwar, M., et al. (2026). Mechanical strength performance and development of water hyacinth particle reinforced thermoset polymer composites. Discover Polymers, 2(1), 21.
5. Sethuramalingam, P., U, M., Pharlia, T., et al. (2025). Design and optimization of a soft gripper based multipurpose end effector for IRB 1410 robot using fuzzy logic and regression Taguchi analysis. Journal of Micro and Bio Robotics, 21(2), 16.
6. Infanta Mary Priya, I., Anand, S., Bishwakarma, A. R., et al. (2025). Design and Evaluation of LLDPE/Epoxy Composite Tiles with YOLOv8-Based Defect Detection for Flooring Applications. Processes.
7. Vasanth kumar.CH, P. S., Uma, M., Reddy, M. M., et al. (2025). Performance Analysis of Cobalt Chromium Alloy Based Femoral Knee Components Polishing Using Industrial IRB 2400 Robot. Journal of Field Robotics.
8. Sethuramalingam, P., Ranganathan, A., Uma, M., et al. (2025). Optimising the design and development of bio-inspired soft robotic grippers: a Taguchi-based approach enhanced by TOPSIS multi-objective technique. International Journal of Manufacturing Research, 20(1), 107-129.
9. REDDY, M., M., & UMA, M., P. (2024). MACHINING OF BRITTLE MATERIAL GLASS BY CO2 LASER USING TAGUCHI L27 ARRAY APPROACH AND ANALYSING ANOVA TECHNIQUES. INTERNATIONAL JOURNAL, 12(9), 1468-1476.
10. Suen, J. W., Elumalai, N. K., Debnath, S., et al. (2023). Study of Capacitive Behavior and its Inter-Relationship with Electrolyte Solution Concentration in Hybrid Ionogels. ECS Journal of Solid State Science and Technology, 12(9), 097001.
11. Suen, J. W., Elumalai, N. K., Debnath, S., et al. (2023). Investigating the correlation between electrolyte concentration and electrochemical properties of ionogels. Molecules, 28(13), 5192.
12. Reddy, M. V. K., Reddy, N. R. S., Kumar, P. N., et al. (2023). Modified low power high speed approximate adders for energy efficient arithmetic applications. 2023 15th International Conference on Electronics, Computers and Artificial Intelligence.
13. Suen, J. W., Elumalai, N. K., Debnath, S., et al. (2022). The role of interfaces in ionic liquid‐based hybrid materials (ionogels) for sensing and energy applications. Advanced Materials Interfaces, 9(34), 2201405.
14. Sim, C. Y., Reddy, M. M., & Sethuramalingam, P. (2022). Fuzzy logic expert system based machinability simulation analysis on nickel based alloy steel. International Journal on Interactive Design and Manufacturing (IJIDeM), 16(3).
15. Wei, S. J., Elumalai, N. K., Debnath, S., et al. (2022). Effect of Concentration of Electrolyte Solution on the Electrochemical Stability of Ionogel. Materials Science Forum, 1064, 65-70.
16. Kui, G. W. A., Islam, S., Reddy, M. M., et al. (2022). Recent progress and evolution of coolant usages in conventional machining methods: a comprehensive review. The International Journal of Advanced Manufacturing Technology, 119(1), 3-40.
17. Reddy, M. M., Shenq, S. L., & Sethuramalingam, P. (2022). Fuzzy logic expert system-based machinability analysis in end milling of aluminium nitride ceramic. International Journal of Machining and Machinability of Materials, 24(1-2).
18. Paturi, U. M. R., Reddy, N. S., Cheruku, S., et al. (2022). Estimation of coating thickness in electrostatic spray deposition by machine learning and response surface methodology. Surface and Coatings Technology, 422, 127559.
19. Reddy, M. M., Reddy, N. S., & Evan, J. N. (2020). Experimental evaluation in dry machining of inconel 718 using coated carbides. Journal of Engineering Research and Reports, 18(4), 1-11.
20. Reddy, M. M., & William, L. C. S. (2020). Finite Element analysis: Predicting cutting force in turning of Inconel 625 using ceramic tools. IOP Conference Series: Materials Science and Engineering, 943(1), 012019.
21. Reddy, M. M., & Kostka, S. R. (2020). Identifying Optimal Cutting Parameters in Drilling of Titanium Aluminum Vanadium Using Finite Element Analysis. Journal of Surface Engineered Materials and Advanced Technology, 10, 55-62.
22. An, A. W. T., Debnath, S., Chen, V. L. C., et al. (2020). Degradation behaviour of nanosilica enhanced oil palm empty fruit bunch fiber epoxy composites. Solid State Phenomena, 305, 28-35.

Profile Details
https://curtin.edu.my/about/learning-and-teaching/engineering-and-science/about/faculty-office/?utm
https://scholar.google.com/citations?user=f4Lx3Y0AAAAJ&hl=en&utm
https://www.researchgate.net/profile/Mmohan-Reddy

WOS ResearcherID: AGK-3061-2022