Prof. Umberto Prisco

Department of Chemical, Materials and Production Engineering

University of Naples Federico II, Italy

Email: [email protected]

Qualifications

2003 Ph.D., University of Napoli Federico II, Manufacturing Science and Technology

1999 M.Sc., University of Napoli Federico II, Chemical Engineering

Publications (Selected)

1. Mendez, P. F., & Prisco, U. (2025). Depth and Velocity of Ablation Under a Constant Heat Flux. ASME Journal of Heat and Mass Transfer.
2. Toumi, O., Khalifa, R. B., Silvestri, A. T., et al. (2024). Assessment of the thermomechanical behavior and microstructure of AA 7075-t6 aluminum alloy lap joints at optimal predicted FSW process parameters. Metals, 14(8), Article 839.
3. Cozzolino, E., Astarita, A., & Prisco, U. (2024). FSW of AA2024: effects of tool wear on energy consumption. Materials and Manufacturing Processes, 39(16), 2291–2298.
4. Prisco, U., & Astarita, A. (2024). Prediction of specific energy consumption during face milling of steel. Materials and Manufacturing Processes, 39(5), 711–719.
5. Prisco, U., Duman, U., & Mendez, P. F. (2023). Scaling modelling of penetration in high productivity gas tungsten arc welding. Journal of Materials Processing Technology, 320, Article 118120.
6. Prisco, U. (2021). Shape of the melt pool produced by a moving Gaussian heat source. Welding in the World, 65(11), 2105–2118.
7. Prisco, U., Martinez, G. A. S., & Kabayama, L. K. (2020). Effect of die pressure on the lubricating regimes achieved in wire drawing. Production Engineering, 14(5–6), 667–676.
8. Martinez, G. A. S., Qian, W.-L., Kabayama, L. K., et al. (2020). Effect of process parameters in copper-wire drawing. Metals, 10(1), Article 105.
9. Prisco, U., Astarita, A., El Hassanin, A., et al. (2019). Influence of processing parameters on microstructure and roughness of electron beam melted Ti-6Al-4V titanium alloy. Materials and Manufacturing Processes, 34(15), 1753–1760.
10. Prisco, U., Impero, F., & Rubino, F. (2019). Peck drilling of CFRP/titanium stacks: effect of tool wear on hole dimensional and geometrical accuracy. Production Engineering, 13(5), 529–538.
11. Astarita, A., Ausanio, G., Boccarusso, L., et al. (2019). Deposition of ferromagnetic particles using a magnetic assisted cold spray process. International Journal of Advanced Manufacturing Technology, 103(1–4), 29–36.
12. Scherillo, F., Astarita, A., Carrino, L., et al. (2019). Linear friction welding of Ti-6Al-4V parts produced by electron beam melting. Materials and Manufacturing Processes, 34(2), 201–207.
13. Viscusi, A., Astarita, A., & Prisco, U. (2019). Mechanical Properties Optimization of Friction Stir Welded Lap Joints in Aluminium Alloy. Advances in Materials Science and Engineering, 2019, Article 3832873.
14. Boccarusso, L., Scherillo, F., & Prisco, U. (2018). Effects of Cr3C2 addition on wear behaviour of WC-Co based cemented carbides. Metals, 8(11), Article 895.
15. Scherillo, F., Astarita, A., Prisco, U., et al. (2018). Selective electrochemical machining of the steel molds in hot isostatic pressing of Ti6Al4V powder. Materials and Manufacturing Processes, 33(14), 1587–1593.
16. Prisco, U. (2018). Case microstructure in induction surface hardening of steels: an overview. International Journal of Advanced Manufacturing Technology, 98(9–12), 2619–2637.

Profile Details

https://www.docenti.unina.it/teacher/bhFTBW990UP8b3XlkNyAeBEMFxw7Kp_ljcy0gQtur0k/profile/referenc

https://www.researchgate.net/profile/Umberto-Prisco?utm
https://scholar.google.com/citations?user=SEkdzxgAAAAJ&hl=it

WOS ResearcherID: J-6210-2012