Prof. Emanuele Calabrò

Institute of Industrial Technology, Italy

Email: [email protected]

Qualifications

2011 Ph.D., Physics applied to environment, Department of Physics, University of Messina, Italy

2008 M.Sc., Developmental Psychology and education, University “G. Marconi”, Italy

2006 M.Sc., General Theory of the Physical Sciences,  University “G. Marconi”, Italy

1995 B.Sc., Engineering, University of Messina, Italy

1990 B.Sc., Physics, University of Messina, Italy

Publications (Selected)

1. Chakraborty, A., Lucarelli, G., Singh, V., et al. (2026). Best practices for measuring the performance and stability of indoor photovoltaic devices. Nature Energy.
2. Shah, U. A., Shankar, G., Malerba, C., et al. (2025). Comparative study of different passivation layers for n-i-p perovskite solar cell for indoor applications. Solar RRL, 9(6).
3. Noola, S., Shankar, G., De Rossi, F., et al. (2025). Cuprous thiocyanate as an inorganic hole transport material for carbon-based flexible perovskite solar cells. Sustainable Energy & Fuels, 9(7), 1786–1796.
4. Rahman, A. U., El Astal-Quirós, A., Susanna, G., et al. (2024). Scaling-up of solution-processable tungsten trioxide (WO3) nanoparticles as a hole transport layer in inverted organic photovoltaics. Energies, 17(4), Article 814.
5. Takhellambam, D., Castriotta, L. A., Zanotti, G., et al. (2023). Enhancing hole transfer in perovskite solar cell with self-assembled monolayer by introducing [1]benzothieno [3,2-b][1]benzothiophene interlayer. Solar RRL, 7(24).
6. Castriotta, L. A., Calabro, E., Di Giacomo, F., et al. (2023). A universal multi-additive strategy to enhance efficiency and stability in inverted perovskite solar cells. Nano Energy, 109, Article 108268.
7. Dianetti, M., Susanna, G., Calabro, E., et al. (2022). Graphene with Ni-grid as semitransparent electrode for bulk heterojunction solar cells (BHJ-SCs). Polymers, 14(5), Article 1046.
8. La Notte, L., Giordano, L., Calabrò, E., et al. (2020). Hybrid and organic photovoltaics for greenhouse applications. Applied Energy, 278, Article 115582.
9. Calabrò, E., Matteocci, F., Paci, B., et al. (2020). Easy strategy to enhance thermal stability of planar PSCs by perovskite defect passivation and low-temperature carbon-based electrode. ACS Applied Materials & Interfaces, 12(29), 32536–32547.
10. Lamanna, E., Matteocci, F., Calabrò, E., et al. (2020). Mechanically stacked, two-terminal graphene-based perovskite/silicon tandem solar cell with efficiency over 26%. Joule, 4(4), 865–881.
11. Taheri, B., Calabrò, E., Matteocci, F., et al. (2020). Automated scalable spray coating of SnO2 for the fabrication of low-temperature perovskite solar cells and modules. Energy Technology, 8(5), Article 1901284.
12. Alberti, A., Smecca, E., Sanzaro, S., et al. (2019). Nanostructured TiO2 grown by low-temperature reactive sputtering for planar perovskite solar cells. ACS Applied Energy Materials, 2(9), 6218–6229.
13. Furasova, A., Calabró, E., Lamanna, E., et al. (2018). Resonant silicon nanoparticles for enhanced light harvesting in halide perovskite solar cells. Advanced Optical Materials, 6(21), Article 1800576.
14. Najafi, L., Taheri, B., Martín-García, B., et al. (2018). MoS2 quantum dot/graphene hybrids for advanced interface engineering of a CH3NH3PbI3 perovskite solar cell with an efficiency of over 20%. ACS Nano, 12(11), 10736–10754.
15. Calabrò, E., Matteocci, F., Palma, A. L., et al. (2018). Low temperature, solution-processed perovskite solar cells and modules with an aperture area efficiency of 11%. Solar Energy Materials and Solar Cells, 185, 136–144.
16. Dagar, J., Castro-Hermosa, S., Gasbarri, M., et al. (2018). Efficient fully laser-patterned flexible perovskite modules and solar cells based on low-temperature solution-processed SnO2/mesoporous-TiO2 electron transport layers. Nano Research, 11(5), 2669–2681.
17. Palma, A. L., Matteocci, F., Agresti, A., et al. (2017). Laser-patterning engineering for perovskite solar modules with 95% aperture ratio. IEEE Journal of Photovoltaics, 7(6), 1674–1680.