Additive Models - Articles - Scientific Research Publishing

Application of Technology of Additive Manufacturing in Radiators and Heat Exchangers (Articles)

Chunhua Sun, Guangqing Shang

Journal of Power and Energy Engineering Vol.10 No.11, November 30, 2022

DOI: 10.4236/jpee.2022.1011003 428 Downloads 2,295 Views Citations
Generalized Hyers-Ulam-Rassisa Type Stability of a Cauchy Additive (ξ₁,ξ₂)-Functional Inequalities with 3k-Variables in Complex Banach Space (Articles)

Ly Van An

Open Access Library Journal Vol.9 No.11, November 30, 2022

DOI: 10.4236/oalib.1109480 114 Downloads 975 Views Citations
Recycled, Bio-Based, and Blended Composite Materials for 3D Printing Filament: Pros and Cons—A Review (Articles)

Khanh Q. Nguyen, Pascal Y. Vuillaume, Lei Hu, Jorge López-Beceiro, Patrice Cousin, Saïd Elkoun, Mathieu Robert

Materials Sciences and Applications Vol.14 No.3, March 10, 2023

DOI: 10.4236/msa.2023.143010 1,163 Downloads 7,541 Views Citations
The Comparison of the Mechanical Characteristics of ABS Using Three Different Plastic Production Techniques (Articles)

Yousuf Pasha Shaik, Naresh Kumar Naidu, Venkat Reddy Yadavalli, Manish Reddy Muthyala

Open Access Library Journal Vol.10 No.5, May 24, 2023

DOI: 10.4236/oalib.1110097 490 Downloads 7,500 Views Citations
Optimization of Extrusion Process Parameters of Recycled High-Density Polyethylene-Thermoplastic Starch Composite for Fused Filament Fabrication (Articles)

Grace Njeri Wamuti, James Wamai Mwangi, Samuel Kabini Karanja, Leif Micke, Henning Zeidler

Open Journal of Composite Materials Vol.13 No.4, September 25, 2023

DOI: 10.4236/ojcm.2023.134006 365 Downloads 1,847 Views Citations
Global Dynamics Analysis of a Cholera Transmission Model with General Incidence and Multiple Modes of Infection (Articles)

Daijun Li, Lianwen Wang

Journal of Applied Mathematics and Physics Vol.11 No.11, November 30, 2023

DOI: 10.4236/jamp.2023.1111236 267 Downloads 769 Views Citations
Characterization of 3D Printed Poly(3-Hydroxybutyric-Co-3-Hydroxyvalerate) by Fused Granular Fabrication through Thermal and Mechanical Analyses (Articles)

Lok-Ching Wu, Cheng-Hao Lee, Yanming Wang, Yaohui Liu, Chi-Wai Kan

Journal of Materials Science and Chemical Engineering Vol.11 No.12, December 29, 2023

DOI: 10.4236/msce.2023.1112006 270 Downloads 907 Views Citations
The Impact of Post-Processing Procedures on the Characteristics of the Additively Manufactured Resins: A Systematic Review (Articles)

Sara Benfaida, Mouna Hamza, Ahmed Benabdelaziz, EL Mehdi Jouhadi

Open Access Library Journal Vol.11 No.5, May 31, 2024

DOI: 10.4236/oalib.1111632 123 Downloads 886 Views Citations
Comparison of Two Approaches to Modeling Additive White Gaussian Noise as It Acts on Arbitrary Signals (Articles)

Serhii Rassomakhin, Joseph Brifman

International Journal of Communications, Network and System Sciences Vol.18 No.4, April 30, 2025

DOI: 10.4236/ijcns.2025.184004 153 Downloads 737 Views Citations
Growth, Haematogical and Economic Response of Clarias gariepinus (Burchell, 1822) Juveniles to Lemon Grass (Cymbopogon citratus) as Feed Additive (Articles)

Divine Ewane, Judith Georgette Makombu, Fidelis Narika Ambeno, Aamon Alex Wirngo, Bertha Anyizi Nkemnyi, Mbeng Ashu Arrey

Open Journal of Animal Sciences Vol.15 No.3, July 30, 2025

DOI: 10.4236/ojas.2025.153019 111 Downloads 637 Views Citations
The Mean Treatment Effect Was Estimated Using a Machine-Learning Model: Evidence from the ECLS-K Dataset (Articles)

Shenshuo Zhang

Journal of Data Analysis and Information Processing Vol.13 No.3, August 28, 2025

DOI: 10.4236/jdaip.2025.133023 82 Downloads 474 Views Citations
Effect of Temperature Cycle on the Microhardness of ER4043 Deposited by Wire Arc Additive Manufacturing (Articles)

Nur Izan Syahriah Hussein, Mohamad Nizam Ayof, Gan Chin Ket, Ahmad Amirul Aizad Samsuri, Nor Ana Rosli, Jongkol Srithorn

Journal of Power and Energy Engineering Vol.13 No.11, November 27, 2025

DOI: 10.4236/jpee.2025.1311005 85 Downloads 450 Views Citations
Applications of Allophane in Mortars and Asphalts: Predictive Modeling and Improvement of Physical-Mechanical Properties (Articles)

Edward Henry Jiménez, Lisbeth Maribel Delgado, Paola Elizabeth Vera, Juan Humberto Villalba, José Bermudez, Jorge Santamaria, Alexis Martial Debut, Marlown Cuenca, Karina Jácome

Advances in Materials Physics and Chemistry Vol.16 No.2, February 24, 2026

DOI: 10.4236/ampc.2026.162005 94 Downloads 605 Views Citations
Explainable AI: Enhancing Clinician Trust and Accuracy in Prostate Cancer Diagnosis (Articles)

Abdelrahman Elsharif Karrar

Journal of Intelligent Learning Systems and Applications Vol.18 No.2, March 12, 2026

DOI: 10.4236/jilsa.2026.182006 135 Downloads 615 Views Citations
Automated Light-Responsive Blinds Controller (Articles)

Andrew Barkman, Trevor Foster

World Journal of Engineering and Technology Vol.14 No.3, June 29, 2026

DOI: 10.4236/wjet.2026.143033 18 Downloads 249 Views Citations
The weighted quadratic index of biodiversity for pairs of species: a generalization of Rao’s index (Articles)

Radu Cornel Guiasu, Silviu Guiasu

Natural Science Vol.3 No.9, September 30, 2011

DOI: 10.4236/ns.2011.39104 5,234 Downloads 10,972 Views Citations
Characterizing Potential Fishing Zone of Skipjack Tuna during the Southeast Monsoon in the Bone Bay-Flores Sea Using Remotely Sensed Oceanographic Data (Articles)

Mukti Zainuddin, Alfa Nelwan, Siti Aisjah Farhum, Najamuddin, Muhammad A. Ibnu Hajar, Muhammad Kurnia, Sudirman

International Journal of Geosciences Vol.4 No.1A, January 29, 2013

DOI: 10.4236/ijg.2013.41A023 5,615 Downloads 10,014 Views Citations
This article belongs to the Special Issue on Earth Observation for Ocean-Atmosphere Interactions
A Novel Multilevel Inverter Employing Additive and Subtractive Topology (Articles)

V. Prasannamoorthy, P. Sundaramoorthi, Merin Jacob

Circuits and Systems Vol.7 No.9, July 20, 2016

DOI: 10.4236/cs.2016.79209 2,087 Downloads 3,903 Views Citations
Accuracy of Orthodontic 3D Printed Retainers versus Thermoformed Retainers (Articles)

Ahmed A. Nasef, Amr R. El-Beialy, Faten Hussein Kamel Eid, Yehya A. Mostafa

Open Journal of Medical Imaging Vol.7 No.4, October 18, 2017

DOI: 10.4236/ojmi.2017.74017 2,346 Downloads 6,827 Views Citations
Multi-Environment Evaluation and Genotype × Environment Interaction Analysis of Sorghum [Sorghum bicolor (L.) Moench] Genotypes in Highland Areas of Ethiopia (Articles)

Amare Seyoum, Zigale Semahegn, Amare Nega, Sewmehone Siraw, Adane Gebreyohannes, Hailemariam Solomon, Tokuma Legesse, Kidanemaryam Wagaw, Temesgene Terresa, Solomon Mitiku, Yirgalem Tsehaye, Moges Mokonen, Wakjira Chifra, Habte Nida, Alemu Tirfessa

American Journal of Plant Sciences Vol.11 No.12, December 9, 2020

DOI: 10.4236/ajps.2020.1112136 756 Downloads 2,460 Views Citations

First <...8910 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies