Hardness - Articles - Scientific Research Publishing

Effect of Beryllium Aluminum Cyclosilicate on Thermal Expansion Behavior of Al-Based Composites (Articles)

V. Bharat, B. Durga Prasad, K. Venkateswarlu

Journal of Minerals and Materials Characterization and Engineering Vol.5 No.3, May 26, 2017

DOI: 10.4236/jmmce.2017.53012 1,836 Downloads 3,419 Views Citations
Effect of Precipitation on the Hardness of Ternary Metallic Glass (Articles)

Xue Liang, Jiuhua Chen, Maria Teresa Mora, Jose Fernandez Urdaneta, Qiaoshi Zeng

Advances in Materials Physics and Chemistry Vol.7 No.6, June 15, 2017

DOI: 10.4236/ampc.2017.76020 1,877 Downloads 3,425 Views Citations
This article belongs to the Special Issue on Phase Equilibrium and Transformation
Development and Quality Evaluation of Choco Quinoa Nutri Bar during Storage (Articles)

Ananthan Padmashree, Neha Negi, Soorya Haridas, Thimma Govindaraj, Kandanganth Raghavan Anila Kumar, Anil Dutt Semwal, Gopal Kumar Sharma

Food and Nutrition Sciences Vol.9 No.7, July 30, 2018

DOI: 10.4236/fns.2018.97067 1,649 Downloads 5,508 Views Citations
Influence of Boron Fiber Powder and Graphite Reinforcements on Physical and Mechanical Properties of Aluminum 2024 Alloy Fabricated by Stir Casting (Articles)

H. S. Kumaraswamy, Vinjamuri Bharat, T. Krishna Rao

Journal of Minerals and Materials Characterization and Engineering Vol.7 No.3, April 19, 2019

DOI: 10.4236/jmmce.2019.73008 1,129 Downloads 2,551 Views Citations
Aging Behaviours of 8011 Al and 8011 Al/15% SiCp Composites (Articles)

V. Vembu

Journal of Minerals and Materials Characterization and Engineering Vol.7 No.5, September 9, 2019

DOI: 10.4236/jmmce.2019.75017 559 Downloads 1,837 Views Citations
Quality of Potable Water Available to the Residents of Anambra State, Nigeria (Articles)

Chigozie John Onyinye Anarado, Charity Ebere Anarado, Benjamin Chimezie Izuagbachukwu, Uzorchukwu Michael Ogu, Amarachi Maduka, Chinyelu Ijeamaka Egwuatu, Valentine Ifenna Onwukeme

Natural Resources Vol.10 No.11, November 26, 2019

DOI: 10.4236/nr.2019.1011027 997 Downloads 3,582 Views Citations
Effect of Cu-Ni and Cu-Ni-Mn on the Microstructural and Mechanical Behaviour of As-Cast Non-Inoculated Hypereutectic Grey Iron (Articles)

Seidu Ojo, Adama Sumaila, Onigbajumo Adetunji

Journal of Minerals and Materials Characterization and Engineering Vol.8 No.2, March 20, 2020

DOI: 10.4236/jmmce.2020.82003 782 Downloads 3,182 Views Citations
Fabrication and Characterization on Physico-Mechanical and Structural Properties of Sawdust Reinforced Acrylonitrile Butadiene Styrene (ABS) Composites (Articles)

Budrun Neher, Nabila Tasnim Nova, Rakib Hossain, M. A. Gafur, Farid Ahmed

Materials Sciences and Applications Vol.11 No.9, September 22, 2020

DOI: 10.4236/msa.2020.119043 1,210 Downloads 2,853 Views Citations
Effects of Micro Vibration Therapy Nursing Care on Muscle Hardness and Skin Blood Flow: A Pre/Post Group Comparison Study (Articles)

Mari Azuma, Chiharu Akazawa

Health Vol.13 No.12, December 30, 2021

DOI: 10.4236/health.2021.1312108 367 Downloads 2,295 Views Citations
Electrochemical Corrosion Study in H₂SO₄ of NiAl with Cu Additions, Microstructure and Micro-Hardness at Room Temperature (Articles)

Jesús M. Colín de la Cruz, Sergio A. Serna Barquera, Alvaro Torres-Islas, Arturo Molina-Ocampo, Edgar Valenzuela, José G. González Rodríguez

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.3, April 22, 2022

DOI: 10.4236/jmmce.2022.103018 333 Downloads 1,188 Views Citations
Hybrid Composite Based on Natural Rubber Reinforced with Short Fibers of the Triumfetta cordifolia/Saccharum officinarum L.: Performance Evaluation (Articles)

Abel Emmanuel Njom, Armel Mewoli, Marie Josette Ndengue, Fabien Betene Ebanda, Augustine Demze Nitidem, Sandrine Biloa Otiti, Yannick Devario Youssi Bang, Legrand Ndoumou Belinga, Pierre Marcel Anicet Noah, Atangana Ateba

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.5, August 30, 2022

DOI: 10.4236/jmmce.2022.105027 375 Downloads 1,765 Views Citations
Experimental Study of Effluent Salty Wastewater Treatment from a Solar Desalination Pond (Articles)

Ali Rasekhnia, Farshad Farahbod

Advances in Nanoparticles Vol.12 No.1, February 7, 2023

DOI: 10.4236/anp.2023.121002 277 Downloads 1,099 Views Citations
Weld Joint Efficiency of the Kazakhstani Constructional Steel (Articles)

Begman Kulbayev, Vladimir Lapin, Alexander Shakhnovich, Tursymbai Tuleyev, Serik Aldakhov, Yerken Aldakhov, Alimzhan Ali

Open Journal of Civil Engineering Vol.13 No.4, December 28, 2023

DOI: 10.4236/ojce.2023.134052 211 Downloads 734 Views Citations
Exploring Bamboo Fiber Reinforced Acrylonitrile Butadiene Styrene (ABS) Polymer Composite by Characterization of Physical, Mechanical and Structural Properties (Articles)

Rabeya Akter, Md Rashedul Islam, Budrun Neher, Md Abdul Gafur, Farid Ahmed

Materials Sciences and Applications Vol.16 No.9, September 3, 2025

DOI: 10.4236/msa.2025.169027 82 Downloads 607 Views Citations
In Situ Synthesis of Titanium Matrix Composite (Ti-TiB-TiC) through Sintering of TiH₂-B₄C (Articles)

Abdul Jimoh, Iakovos Sigalas, Mathias Hermann

Materials Sciences and Applications Vol.3 No.1, January 12, 2012

DOI: 10.4236/msa.2012.31005 5,824 Downloads 10,588 Views Citations
Effect of Cr₃C₂ and VC on the Mechanical and Structural Properties of Sintered WC-10wt%Co Nano Powders (Articles)

Morteza Mahmoodan, Hamed Aliakbarzadeh, Farzad Shahri

World Journal of Nano Science and Engineering Vol.3 No.2, June 18, 2013

DOI: 10.4236/wjnse.2013.32005 4,684 Downloads 7,722 Views Citations
Mechanical Properties of a Vacuum-Sintered Apatite Body for Use as Artificial Bone (Articles)

Kenichi Tamura

Journal of Biomaterials and Nanobiotechnology Vol.6 No.1, January 9, 2015

DOI: 10.4236/jbnb.2015.61005 3,670 Downloads 5,128 Views Citations
Refractory Hard Alloys Elaborated by Casting of Ternary (Co, Ni Fe)-30Cr-2.5 to 5 wt% C Compositions (Articles)

Patrice Berthod, Ophélie Hestin, Elise Souaillat, Moussa Ba, Ahmed Dia, Lionel Aranda, Thierry Schweitzer, Ludovic Mouton, Alain Kohler, Pascal Villeger, Elodie Conrath

Journal of Materials Science and Chemical Engineering Vol.3 No.7, July 1, 2015

DOI: 10.4236/msce.2015.37017 3,983 Downloads 5,154 Views Citations
Single Track Laser Surface Hardening Model for AISI 4340 Steel Using the Finite Element Method (Articles)

Ahmed Ghazi Jerniti, Abderazzak El Ouafi, Noureddine Barka

Modeling and Numerical Simulation of Material Science Vol.6 No.2, April 8, 2016

DOI: 10.4236/mnsms.2016.62003 3,260 Downloads 6,079 Views Citations
Hardness Profile Prediction for a 4340 Steel Spline Shaft Heat Treated by Laser Using a 3D Modeling and Experimental Validation (Articles)

Mahdi Hadhri, Abderazzak El Ouafi, Noureddine Barka

Journal of Materials Science and Chemical Engineering Vol.4 No.4, April 28, 2016

DOI: 10.4236/msce.2016.44002 2,387 Downloads 4,185 Views Citations

First <...789 >Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies