Steel Corrosion; Concrete Durability; Amino Alcohols; Corrosion Inhibitors; Cement Mortars - Articles

Rubblization: A Practical, Cost Effective and Sustainable Option for Repairing Deteriorated Airfield Pavement in the Empty Quarter Desert of Saudi Arabia (Articles)

Waseem Ahmad Khatri, Mohammed Al Mehthel, Sami Al Ghamdi, Nezar Al Khalifa

Open Journal of Civil Engineering Vol.11 No.2, June 29, 2021

DOI: 10.4236/ojce.2021.112014 435 Downloads 2,418 Views Citations
Seepage Mitigation in Hydropower Dams by Optimization in Roller Compacted Concrete Interlayer (Monoliths) Joint Bonding Technology (Articles)

Junjie Jin, Qingguo Zhou, Yuanguang Liu, Shuncai Ning

Open Journal of Civil Engineering Vol.12 No.1, March 31, 2022

DOI: 10.4236/ojce.2022.121009 308 Downloads 1,502 Views Citations
Life Cycle Assessment of CCA-Treated Wood Highway Guard Rail Posts in the US with Comparisons to Galvanized Steel Guard Rail Posts (Articles)

Christopher A. Bolin, Stephen T. Smith

Journal of Transportation Technologies Vol.3 No.1, January 25, 2013

DOI: 10.4236/jtts.2013.31007 7,520 Downloads 11,807 Views Citations
Modeling Africa’s Demand for Iron and Steel Importation: An International Market Estimation Method Perspective (Articles)

Fidelys Ravelomanana, Liang Yan, Christophe Mahazomanana, Leoncine Paul Miarisoa

American Journal of Industrial and Business Management Vol.4 No.12, December 31, 2014

DOI: 10.4236/ajibm.2014.412086 3,639 Downloads 4,896 Views Citations
Analytical Method to Monitor Industrial Pickling Baths Initially Constituted by HF, HNO₃ (Articles)

Brigitte Dustou, Laure Latapie, Fabien Chauvet, Jean-Michel Bergerat, Theodore Tzedakis

Journal of Analytical Sciences, Methods and Instrumentation Vol.7 No.4, December 29, 2017

DOI: 10.4236/jasmi.2017.74009 2,878 Downloads 6,518 Views Citations
Three-Dimensional Thermo-Elastic-Plastic Finite Element Method Modeling for Predicting Weld-Induced Residual Stresses and Distortions in Steel Stiffened-Plate Structures (Articles)

Myung Su Yi, Chung Min Hyun, Jeom Kee Paik

World Journal of Engineering and Technology Vol.6 No.1, February 27, 2018

DOI: 10.4236/wjet.2018.61010 1,933 Downloads 5,145 Views Citations
This article belongs to the Special Issue on Welding Technology
Design and Analysis of MEMS Based Aluminum Nitride (AlN), Lithium Niobate (LiNbO₃) and Zinc Oxide (ZnO) Cantilever with Different Substrate Materials for Piezoelectric Vibration Energy Harvesters Using COMSOL Multiphysics Software (Articles)

Ahmad M. Alsaad, Ahmad A. Ahmad, Qais M. Al-Bataineh, Nermeen S. Daoud, Mais H. Khazaleh

Open Journal of Applied Sciences Vol.9 No.4, April 19, 2019

DOI: 10.4236/ojapps.2019.94016 1,467 Downloads 4,078 Views Citations
A Three-Dimensional Numerical Model for Predicting the Weld Bead Geometry Characteristics in Laser Overlap Welding of Low Carbon Galvanized Steel (Articles)

Kamel Oussaid, Abderrazak El Ouafi

Journal of Applied Mathematics and Physics Vol.7 No.10, October 8, 2019

DOI: 10.4236/jamp.2019.710149 1,220 Downloads 3,469 Views Citations
This article belongs to the Special Issue on Application of Mathematical Models in Physics and Engineering
Experimental Investigation of Laser Surface Hardening of AISI 4340 Steel Using Different Laser Scanning Patterns (Articles)

Baha Tarchoun, Abderrazak El Ouafi, Ahmed Chebak

Journal of Minerals and Materials Characterization and Engineering Vol.8 No.2, March 10, 2020

DOI: 10.4236/jmmce.2020.82002 700 Downloads 2,631 Views Citations
Performance-Based Design through Implementation of FEMA P-58 Methodology in Developing Countries (Articles)

Amir Masoumi Verki, Seyed Bahram Beheshti Aval

Open Journal of Earthquake Research Vol.9 No.3, April 13, 2020

DOI: 10.4236/ojer.2020.93015 1,209 Downloads 3,829 Views Citations
Numerical Investigation of Laser Surface Hardening of AISI 4340 Using 3D FEM Model for Thermal Analysis of Different Laser Scanning Patterns (Articles)

Baha Tarchoun, Abderrazak El Ouafi, Ahmed Chebak

Modeling and Numerical Simulation of Material Science Vol.10 No.3, July 17, 2020

DOI: 10.4236/mnsms.2020.103003 795 Downloads 2,106 Views Citations
Investigation of Working Bodies of the Device for Separation of Fibers Suitable for Spinning from Cotton Waste (Articles)

Avazbek Obidov, Mirzaolim Sultonov

Engineering Vol.12 No.12, December 30, 2020

DOI: 10.4236/eng.2020.1212063 743 Downloads 1,449 Views Citations
Determination of the Friction Coefficient in the Flat Strip Drawing Test (Articles)

Anvar Makhkamov

Engineering Vol.13 No.11, November 29, 2021

DOI: 10.4236/eng.2021.1311043 378 Downloads 1,959 Views Citations
Laser Beam Welding of 600 MPa Quenched and Tempered High-Strength Steel (Articles)

Pritchard Elmon Marozva, Bruno Roberts Mose, Abdel-Monem El-Batahgy, Thomas Ochuku Mbuya

World Journal of Engineering and Technology Vol.10 No.2, May 11, 2022

DOI: 10.4236/wjet.2022.102015 333 Downloads 1,637 Views Citations
Determination of Technological Parameters of Fiber Separation Device from Cotton Waste (Articles)

Sultanov Mirzaolim Mirzaraxmatovich

Engineering Vol.14 No.11, November 29, 2022

DOI: 10.4236/eng.2022.1411038 187 Downloads 821 Views Citations
Exploring Ester Prodrugs: A Comprehensive Review of Approaches, Applications, and Methods (Articles)

Guangyang Zhou

Pharmacology & Pharmacy Vol.15 No.8, August 27, 2024

DOI: 10.4236/pp.2024.158016 600 Downloads 5,107 Views Citations
Investigating the Challenges in Structural Analysis and Design Practices in Somalia: A Path toward Safer Buildings (Articles)

Abdihalim Mohamed Hussein, Bashir Abdi Elmi, Abdirahim Abdulkadir Mohamed, Ismail Sadi Mohamud, Abdikarim Abdullahi Moallim

World Journal of Engineering and Technology Vol.13 No.2, March 27, 2025

DOI: 10.4236/wjet.2025.132013 143 Downloads 1,027 Views Citations
Parameter Optimization of Amalgamated Al₂O₃-40% TiO₂ Atmospheric Plasma Spray Coating on SS304 Substrate Using TLBO Algorithm (Articles)

Thankam Sreekumar Rajesh, Ravipudi Venkata Rao

Journal of Surface Engineered Materials and Advanced Technology Vol.6 No.3, June 28, 2016

DOI: 10.4236/jsemat.2016.63009 2,680 Downloads 4,478 Views Citations
A Reliable Methodology for Quantitative Extraction of Fruit and Vegetable Physiological Amino Acids and Their Subsequent Analysis with Commonly Available HPLC Systems (Articles)

Wayne W. Fish

Food and Nutrition Sciences Vol.3 No.6, June 21, 2012

DOI: 10.4236/fns.2012.36115 10,629 Downloads 16,165 Views Citations

First <...72 7374>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies