Silk Fibroin; Sterilization; Degradation; Mechanical Properties - Articles

The Development and Characterization of Zirconia-Silica Sand Nanoparticles Composites (Articles)

Tahir Ahmad, Othman Mamat

World Journal of Nano Science and Engineering Vol.1 No.1, March 24, 2011

DOI: 10.4236/wjnse.2011.11002 7,657 Downloads 15,576 Views Citations
Processability of Biobased Thermoset Resins and Flax Fibres Reinforcements Using Vacuum Assisted Resin Transfer Moulding (Articles)

J. Schuster, Q. Govignon, S. Bickerton

Open Journal of Composite Materials Vol.4 No.1, January 7, 2014

DOI: 10.4236/ojcm.2014.41001 4,461 Downloads 8,773 Views Citations
Thermo-Physical and Mechanical Properties of Al Hashimiyya Basaltic Rocks, Jordan (Articles)

Sana’a Al-Zyoud

International Journal of Geosciences Vol.10 No.2, February 28, 2019

DOI: 10.4236/ijg.2019.102012 757 Downloads 1,720 Views Citations
Synthesis and Characterization of Heat Treated Cu-Al alloys for Energy Applications (Articles)

J. Pereyra-Hernández, O. Ocampo, R. A. Falcon-Castrejon, I. Rosales-Cadena, J. A. Ruiz-Ochoa

Journal of Materials Science and Chemical Engineering Vol.7 No.11, November 22, 2019

DOI: 10.4236/msce.2019.711003 864 Downloads 2,352 Views Citations
Characterization of Nano-Silica Local Metakaolin Based-Geopolymer: Microstructure and Mechanical Properties (Articles)

Zeineb Zidi, Mounir Ltifi, Idrees Zafar

Open Journal of Civil Engineering Vol.10 No.2, June 10, 2020

DOI: 10.4236/ojce.2020.102013 1,008 Downloads 3,236 Views Citations
Study of the Effect of Plastic Aggregates on Drying Shrinkage and Expansion of Concrete (Articles)

Kouamou Nguessi Arnaud, Yamb Emmanuel, Ndigui Billong, Ngwem Bayiha Blaise, Mbuh Moses Kuma, Tchemou Gilbert, Christian Hyeng Bock, Madouma Madouma Arnold

Materials Sciences and Applications Vol.14 No.4, April 10, 2023

DOI: 10.4236/msa.2023.144015 270 Downloads 1,330 Views Citations
Synthesis and Characterization of Aluminum Alloys with Metal Oxides (CuO₂) Additions as Reinforcement (Articles)

Reyna Anahí Falcón-Castrejón, Jose Luis Román-Zubillaga, Rene Guardián-Tapia, Lazaro Falcón-Franco, Isaí Rosales-Cadena

Materials Sciences and Applications Vol.14 No.8, August 18, 2023

DOI: 10.4236/msa.2023.148027 252 Downloads 1,071 Views Citations
Effect of Heat Treatment on the Mechanical and Electrical Properties of Al-Co-Mn Alloys (Articles)

Isaí Rosales-Cadena, Rene Guardian-Tapia, Jose G. Pereyra-Hernández, Juan Antonio Ruiz-Ochoa

Journal of Minerals and Materials Characterization and Engineering Vol.13 No.3, May 30, 2025

DOI: 10.4236/jmmce.2025.133006 54 Downloads 474 Views Citations
Thermomechanical Characterization of Earth Bricks Made from Excavated Earth from Diamniadio in Senegal (Articles)

Mouhamadou B. Sène, Seckou Bodian, Ndèye A. Sène, Alpha O. Touré, Ibrahim Niang, Aida Gaye, Gnilane Thiam, Elhadji Dieng, Ibrahim Diaw, Ansoumane Sakouvogui, Tamba Nicolas Millimono, Mactar Faye, Vincent Sambou

Open Journal of Civil Engineering Vol.15 No.2, June 11, 2025

DOI: 10.4236/ojce.2025.152008 76 Downloads 453 Views Citations
Formulation and Investigation of Thermo Mechanical Properties of a Friction Material (Liner) Made from Ox Horn Particles (Articles)

Moungnutou Ndam Soulemanou, Anyi Joseph Nkongho, Theodore Tchotang, Mahonde

Journal of Minerals and Materials Characterization and Engineering Vol.13 No.6, November 14, 2025

DOI: 10.4236/jmmce.2025.136019 76 Downloads 416 Views Citations
Silk Mills in the Early Modern Italy (Articles)

Stefano Comino, Alessandro Gasparetto

Advances in Historical Studies Vol.9 No.5, December 8, 2020

DOI: 10.4236/ahs.2020.95022 797 Downloads 5,248 Views Citations
This article belongs to the Special Issue on ‘Findings on history of Italian mechanical Engineering’ from IFIT 2020, the Third International Conference of IFToMM ITALY
The Effects of Fe₂O₃ and B₂O₃ on the Glass Structural, Thermal, in Vitro Degradation Properties of Phosphate Based Glasses (Articles)

Chenkai Zhu, Jinsong Liu, Songling Huang, Lizhe He, Xiaoye Cong, Chao Tan, Chris Rudd, Xiaoling Liu

New Journal of Glass and Ceramics Vol.7 No.4, October 30, 2017

DOI: 10.4236/njgc.2017.74009 1,567 Downloads 4,167 Views Citations
Effect of Chemical Extraction on Physicochemical and Mechanical Properties of Doum Palm Fibres (Articles)

S. Zannen, L. Ghali, M. T. Halimi, M. Ben Hssen

Advances in Materials Physics and Chemistry Vol.4 No.10, October 23, 2014

DOI: 10.4236/ampc.2014.410024 4,993 Downloads 7,328 Views Citations
Experimental Investigation on the Effect of Reinforcement Particles on the Forgeability and the Mechanical Properties of Aluminum Metal Matrix Composites (Articles)

S. Das, R. Behera, A. Datta, G. Majumdar, B. Oraon, G. Sutradhar

Materials Sciences and Applications Vol.1 No.5, December 1, 2010

DOI: 10.4236/msa.2010.15045 7,481 Downloads 15,010 Views Citations
Mechanical Characteristics of Superaustenitic Stainless Steel Type 30Cr25Ni32Mo3 at Elevated Temperatures (Articles)

Gholam Reza Ebrahimi, Hamid Keshmiri, Hadi Arabshahi

Materials Sciences and Applications Vol.1 No.6, December 29, 2010

DOI: 10.4236/msa.2010.16047 7,496 Downloads 13,414 Views Citations
Carbon Nanotube Addition to Simultaneously Enhance Strength and Ductility of Hybrid AZ31/AA5083 Alloy (Articles)

Muralidharan Paramsothy, Manoj Gupta, Jimmy Chan, Richard Kwok

Materials Sciences and Applications Vol.2 No.1, January 25, 2011

DOI: 10.4236/msa.2011.21004 6,167 Downloads 11,727 Views Citations
Elevated Temperatures Tensile Characteristics of Cast A356/Al₂O₃ Nanocomposites Fabricated Using a Combination of Rheocasting and Squeeze Casting Techniques (Articles)

El-Sayed Youssef El-Kady, Tamer Samir Mahmoud, Mohamed Abdel-Aziz Sayed

Materials Sciences and Applications Vol.2 No.5, May 5, 2011

DOI: 10.4236/msa.2011.25050 9,303 Downloads 16,912 Views Citations
Tannin–Phenol Formaldehyde Resins As Binders for Cellulosic Fibers: Mechanical Properties (Articles)

A.S. Hussein, K.I. Ibrahim, K. M. Abdulla

Natural Resources Vol.2 No.2, June 17, 2011

DOI: 10.4236/nr.2011.22013 8,327 Downloads 17,172 Views Citations
Effects of Synthetic and Processing Methods on Dispersion Characteristics of Nanoclay in Polypropylene Polymer Matrix Composites (Articles)

Turup Pandurangan Mohan, Krishnan Kanny

Materials Sciences and Applications Vol.2 No.7, July 29, 2011

DOI: 10.4236/msa.2011.27108 7,012 Downloads 11,387 Views Citations
Studies on Mechanical and End-Use Properties of Natural Rubber Filled with Snail Shell Powder (Articles)

Isaac Ogbennaya Igwe, Augustina Adanna Ejim

Materials Sciences and Applications Vol.2 No.7, July 29, 2011

DOI: 10.4236/msa.2011.27109 7,768 Downloads 14,389 Views Citations

First <...567 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies