Additive Model - Articles - Scientific Research Publishing

The Effects of Build Parameters and Strain Rate on the Mechanical Properties of FDM 3D-Printed Acrylonitrile Butadiene Styrene (Articles)

Kemar Hibbert, Grant Warner, Celeste Brown, Olusegun Ajide, Gbadebo Owolabi, Amin Azimi

Open Journal of Organic Polymer Materials Vol.9 No.1, January 31, 2019

DOI: 10.4236/ojopm.2019.91001 1,684 Downloads 4,694 Views Citations
Origin of Dynamic Correlations of Words in Written Texts (Articles)

Hiroshi Ogura, Hiromi Amano, Masato Kondo

Journal of Data Analysis and Information Processing Vol.7 No.4, October 15, 2019

DOI: 10.4236/jdaip.2019.74014 762 Downloads 1,757 Views Citations
Pullback Random Attractors for Non-Autonomous Stochastic Fractional FitzHugh-Nagumo System (Articles)

Chunxiao Guo, Yiju Chen, Yanfeng Guo

Journal of Applied Mathematics and Physics Vol.8 No.1, January 8, 2020

DOI: 10.4236/jamp.2020.81010 756 Downloads 1,611 Views Citations
The “Too-Much-of-a-Good-Thing” Effect of Job Autonomy and Its Explanation Mechanism (Articles)

Enxi Zhou

Psychology Vol.11 No.2, February 13, 2020

DOI: 10.4236/psych.2020.112019 3,808 Downloads 27,213 Views Citations
Landfill Site Selection Using GIS and Multi-Criteria Decision-Making AHP and SAW Methods: A Case Study in Sulaimaniyah Governorate, Iraq (Articles)

Karwan Alkaradaghi, Salahalddin S. Ali, Nadhir Al-Ansari, Jan Laue

Engineering Vol.12 No.4, April 23, 2020

DOI: 10.4236/eng.2020.124021 1,195 Downloads 4,923 Views Citations
Numerical Analysis and Modelling of a 100 N Hypergolic Liquid Bipropellant Thruster (Articles)

Grace Olileanya Ngwu, Benjamin Iyenagbe Ugheoke, Olatunbosun Tarfa Yusuf, Mopa Ashem Nyabam, Spencer Ojogba Onuh

Advances in Aerospace Science and Technology Vol.5 No.4, November 27, 2020

DOI: 10.4236/aast.2020.54006 970 Downloads 3,671 Views Citations
Antioxidant and Immunopotentiating Effects of Cordyceps Mycelium Extract, Chicken Essence, and Their Combination in Experimental Models (Articles)

Hoi Yan Leung, Choly Tat Ming Yan, Kam Ming Ko

Chinese Medicine Vol.12 No.1, March 19, 2021

DOI: 10.4236/cm.2021.121001 704 Downloads 2,182 Views Citations
Inference Procedures on the Generalized Poisson Distribution from Multiple Samples: Comparisons with Nonparametric Models for Analysis of Covariance (ANCOVA) of Count Data (Articles)

Maha Al-Eid, Mohamed M. Shoukri

Open Journal of Statistics Vol.11 No.3, June 25, 2021

DOI: 10.4236/ojs.2021.113026 508 Downloads 2,280 Views Citations
Effect of Molasses Addition at Ensiling on Ruminal In Situ Dry Matter and Nutrient Degradation of Whole-Plant Soybean Silage Harvested at Different Phenological Stages (Articles)

Lucas Ghedin Ghizzi, Matheus Rebouças Pupo, Celso Heinzen Jr., Tiago Antônio Del Valle, Francisco Palma Rennó, Luiz Felipe Ferraretto

Agricultural Sciences Vol.13 No.2, February 25, 2022

DOI: 10.4236/as.2022.132018 369 Downloads 1,631 Views Citations
Mechanical Properties, Metallurgical Characteristics and Anisotropy of Additive Manufacturing of 316L (Articles)

D. Moreno, Y. Nahmana, O. Nafman, O. Kam, B. Wolfman, A. Y. Cohen, M. Shapira

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.2, March 31, 2022

DOI: 10.4236/jmmce.2022.102017 810 Downloads 2,368 Views Citations
Aspects of the Powder in Metal Additive Manufacturing: A Review (Articles)

Gladius Lewis

World Journal of Engineering and Technology Vol.10 No.2, May 25, 2022

DOI: 10.4236/wjet.2022.102022 981 Downloads 4,865 Views Citations
Interpreting the Method of “Graphic Design” in the Birth of Modeling (Articles)

Jiahui Zang

Open Access Library Journal Vol.9 No.8, August 19, 2022

DOI: 10.4236/oalib.1109141 102 Downloads 814 Views Citations
The Effect of Consumption on the Appearance of Closers Implemented by 3D Printer Technology (FDM) (Articles)

Sanaa Abdullah Alsiyami, Shadia Salah Salem

Journal of Textile Science and Technology Vol.8 No.4, September 16, 2022

DOI: 10.4236/jtst.2022.84014 303 Downloads 1,222 Views Citations
Effects of Inclusion of Different Levels of Ethiopian Thyme (Thymus schimperi Ronniger) as Natural Additive on Chemical Composition and In Sacco Dry Matter Degradability of Total Mixed Ration and Feed Ingredients (Articles)

Feyissa Kera, Mengistu Urge, Getachew Animut, Adugna Tolera

Open Journal of Veterinary Medicine Vol.12 No.11, November 15, 2022

DOI: 10.4236/ojvm.2022.1211013 255 Downloads 1,220 Views Citations
Application of Technology of Additive Manufacturing in Radiators and Heat Exchangers (Articles)

Chunhua Sun, Guangqing Shang

Journal of Power and Energy Engineering Vol.10 No.11, November 30, 2022

DOI: 10.4236/jpee.2022.1011003 392 Downloads 2,182 Views Citations
Generalized Hyers-Ulam-Rassisa Type Stability of a Cauchy Additive (ξ₁,ξ₂)-Functional Inequalities with 3k-Variables in Complex Banach Space (Articles)

Ly Van An

Open Access Library Journal Vol.9 No.11, November 30, 2022

DOI: 10.4236/oalib.1109480 111 Downloads 939 Views Citations
Recycled, Bio-Based, and Blended Composite Materials for 3D Printing Filament: Pros and Cons—A Review (Articles)

Khanh Q. Nguyen, Pascal Y. Vuillaume, Lei Hu, Jorge López-Beceiro, Patrice Cousin, Saïd Elkoun, Mathieu Robert

Materials Sciences and Applications Vol.14 No.3, March 10, 2023

DOI: 10.4236/msa.2023.143010 1,118 Downloads 7,381 Views Citations
The Comparison of the Mechanical Characteristics of ABS Using Three Different Plastic Production Techniques (Articles)

Yousuf Pasha Shaik, Naresh Kumar Naidu, Venkat Reddy Yadavalli, Manish Reddy Muthyala

Open Access Library Journal Vol.10 No.5, May 24, 2023

DOI: 10.4236/oalib.1110097 475 Downloads 7,368 Views Citations
Optimization of Extrusion Process Parameters of Recycled High-Density Polyethylene-Thermoplastic Starch Composite for Fused Filament Fabrication (Articles)

Grace Njeri Wamuti, James Wamai Mwangi, Samuel Kabini Karanja, Leif Micke, Henning Zeidler

Open Journal of Composite Materials Vol.13 No.4, September 25, 2023

DOI: 10.4236/ojcm.2023.134006 343 Downloads 1,747 Views Citations
Characterization of 3D Printed Poly(3-Hydroxybutyric-Co-3-Hydroxyvalerate) by Fused Granular Fabrication through Thermal and Mechanical Analyses (Articles)

Lok-Ching Wu, Cheng-Hao Lee, Yanming Wang, Yaohui Liu, Chi-Wai Kan

Journal of Materials Science and Chemical Engineering Vol.11 No.12, December 29, 2023

DOI: 10.4236/msce.2023.1112006 227 Downloads 833 Views Citations

First <...567 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies