Steel Corrosion; Concrete Durability; Amino Alcohols; Corrosion Inhibitors; Cement Mortars - Articles

Recrystallization Kinetics and Microstructure Evolution of Annealed Cold-Drawn Low-Carbon Steel (Articles)

Nurudeen A. Raji, Oluleke O. Oluwole

Journal of Crystallization Process and Technology Vol.3 No.4, October 31, 2013

DOI: 10.4236/jcpt.2013.34025 7,243 Downloads 11,709 Views Citations
Experimental Investigation of Progressive Collapse of Steel Frames (Articles)

Kamel Sayed Kandil, Ehab Abd El Fattah Ellobody, Hanady Eldehemy

World Journal of Engineering and Technology Vol.1 No.3, November 5, 2013

DOI: 10.4236/wjet.2013.13006 5,010 Downloads 11,470 Views Citations
Optimization of the Annealing Parameters for Improved Tensile Properties in Cold Drawn 0.12 wt% C Steel (Articles)

Nurudeen A. Raji, Oluleke O. Oluwole

Engineering Vol.5 No.11, November 6, 2013

DOI: 10.4236/eng.2013.511106 3,495 Downloads 5,344 Views Citations
The Effect of Heat Treatment Atmosphere on Hardening of Surface Region of H13 Tool Steel (Articles)

Timotius Pasang, Zhan Chen, Maziar Ramezani, Thomas Neitzert, Dominique Au

Journal of Materials Science and Chemical Engineering Vol.1 No.6, November 13, 2013

DOI: 10.4236/msce.2013.16004 6,807 Downloads 11,688 Views Citations
Effect of Magnetic Field on the Friction and Wear of Polyamide Sliding against Steel (Articles)

G. T. Abdel-Jaber, M. K. Mohamed, W. Y. Ali

Materials Sciences and Applications Vol.5 No.1, January 27, 2014

DOI: 10.4236/msa.2014.51007 5,672 Downloads 8,271 Views Citations
Stainless steel double loop appliance to correct ectopically positioned maxillary permanent first molar (Articles)

Maen Mahfouz

Open Journal of Stomatology Vol.4 No.2, February 26, 2014

DOI: 10.4236/ojst.2014.42015 5,114 Downloads 8,088 Views Citations
Plasma Enhanced-Chemical Vapour Deposition of Scuff-Resistant Hydrogenated Amorphous Carbon Coatings on C100 Steel (Articles)

Nicoletta De Vietro, Gianluigi Intonti, Francesco Fracassi, Gianluca Quarta, Lucio Maruccio, Lucio Calcagnile

Journal of Surface Engineered Materials and Advanced Technology Vol.4 No.3, April 28, 2014

DOI: 10.4236/jsemat.2014.43017 3,886 Downloads 5,594 Views Citations
This article belongs to the Special Issue on Surface Coatings: Development and Applications
Comparative Assessment on Machinability of Nano-Structured Bainitic Steel and Titanium64 (Articles)

Ashwin Polishetty, Chinmay Sonavane, Prasad Patil, Guy Littlefair

Journal of Materials Science and Chemical Engineering Vol.2 No.7, July 8, 2014

DOI: 10.4236/msce.2014.27004 2,599 Downloads 4,290 Views Citations
The Impact of Microscopic Fungi on the Morphological and Structural Properties of Carbon Steel (Articles)

Elena Binkauskiene, Albinas Lugauskas, Igoris Prosyčevas, Vidas Pakštas, Aušra Selskiene, Dalia Bučinskiene, Alma Ručinskiene

Journal of Surface Engineered Materials and Advanced Technology Vol.4 No.4, July 17, 2014

DOI: 10.4236/jsemat.2014.44027 3,118 Downloads 4,772 Views Citations
Effect of V-Ti on the Microstructure and Abrasive Wear Behavior of 6CrC Cast Steel Mill Balls (Articles)

S. I. Maldonado-Ruiz, P. Orozco-González, V. H. Baltazar-Hernández, A. Bedolla-Jacuinde, M. A. L. Hernández-Rodríguez

Journal of Minerals and Materials Characterization and Engineering Vol.2 No.5, August 5, 2014

DOI: 10.4236/jmmce.2014.25043 6,252 Downloads 7,697 Views Citations
Assessment and Risk Management of Potential Hazards by Failure Modes and Effect Analysis (FMEA) Method in Yazd Steel Complex (Articles)

Mehrzad Ebrahemzadih, G. H. Halvani, Behzad Shahmoradi, Omid Giahi

Open Journal of Safety Science and Technology Vol.4 No.3, September 3, 2014

DOI: 10.4236/ojsst.2014.43014 8,361 Downloads 12,936 Views Citations
Zr-Ti-Ni-Cu Amorphous Brazing Fillers Applied to Brazing Titanium TA2 and Q235 Steel (Articles)

Jie Cui, Qiuya Zhai, Jinfeng Xu, Yahui Wang, Jianlin Ye

Materials Sciences and Applications Vol.5 No.11, September 29, 2014

DOI: 10.4236/msa.2014.511082 3,747 Downloads 5,225 Views Citations
Comparative Electrochemical Noise Study of the Corrosion of Different Alloys Exposed to Chloride Media (Articles)

Adham M. Nagiub

Engineering Vol.6 No.13, December 26, 2014

DOI: 10.4236/eng.2014.613091 3,713 Downloads 5,498 Views Citations
Does the Location of the Cutting Flute of Self-Tapping Screws in Bony Substrate Affect the Removal Torque? (Articles)

David James Chapman Graham, Alistair Spiers, Eric Swarts, Colin Whitewood

Open Journal of Orthopedics Vol.5 No.1, January 13, 2015

DOI: 10.4236/ojo.2015.51001 4,623 Downloads 5,755 Views Citations
Structure Evolution in Austenitic Stainless Steels—A State Variable Model Assessment (Articles)

Paul S. Follansbee

Materials Sciences and Applications Vol.6 No.6, May 29, 2015

DOI: 10.4236/msa.2015.66049 2,948 Downloads 4,189 Views Citations
ND:YAG Laser Pulses Ablation Threshold of Stainless Steel 304 (Articles)

Mitra Radmanesh, Amirkianoosh Kiani

Materials Sciences and Applications Vol.6 No.7, July 14, 2015

DOI: 10.4236/msa.2015.67065 4,174 Downloads 6,194 Views Citations
Evaluation of Cost Effectiveness of Onibode Fire-Clay for Production of High Quality Refractory Bricks (Articles)

David Ehigie Esezobor, Friday Ichifu Apeh, Mfon Okon Udo, Mustapha Fabiyi, Enebi Solomon Apeh

Journal of Minerals and Materials Characterization and Engineering Vol.3 No.5, August 26, 2015

DOI: 10.4236/jmmce.2015.35042 6,305 Downloads 7,791 Views Citations
In-Situ Hydroelectrothermal Deposition of Silicate Layers on Stainless Steel Surfaces (Articles)

Jaybalan Tamahrajah, Axel Brehm

Advances in Materials Physics and Chemistry Vol.5 No.9, September 8, 2015

DOI: 10.4236/ampc.2015.59038 4,442 Downloads 5,588 Views Citations
Influence of Cryogenic Treatment on Microstructure and Properties Improvement of Die Steel (Articles)

Shangtan Liu, Xiaochun Wu, Lei Shi, Yiwen Wu, Wei Qu

Journal of Materials Science and Chemical Engineering Vol.3 No.9, September 16, 2015

DOI: 10.4236/msce.2015.39005 3,746 Downloads 5,777 Views Citations
Effect of Heat Treatment Parameters on the Mechanical and Microstructure Properties of Low-Alloy Steel (Articles)

Mohamed H. Frihat

Journal of Surface Engineered Materials and Advanced Technology Vol.5 No.4, October 16, 2015

DOI: 10.4236/jsemat.2015.54023 6,203 Downloads 9,348 Views Citations

First <...515253 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies