Wear; Artificial Joints; CoCrMo - Articles - Scientific Research Publishing

Appraisal of Surface Modified AISI 316 L Stainless Steels by Plasma and Solid Nitriding Techniques (Articles)

R. Guardian, I. Rosales-Cadena, J. L. Valle-Mata, J. Pereyra-Hernández, O. Ocampo

Materials Sciences and Applications Vol.11 No.7, July 17, 2020

DOI: 10.4236/msa.2020.117032 735 Downloads 2,130 Views Citations
Sintering and Wear Behavior of a FeCrCB Hardfacing Alloy Applied by Tape Casting: A Study of Cooling Rate Effect (Articles)

Fernando Valenzuela de la Rosa, Roal Torres Sánchez, José T. Holguín-Momaca, Carlos Domínguez Ríos, Alfredo Aguilar Elguezabal

Journal of Minerals and Materials Characterization and Engineering Vol.8 No.5, September 10, 2020

DOI: 10.4236/jmmce.2020.85025 574 Downloads 1,585 Views Citations
Effect of Cast Thickness and Austenitizing Temperature on Microstructure and Mechanical Properties of ADI and IADI Castings (Articles)

A. M. Negm, S. S. Mohamed, Mervat M. Ibrahim, Moussa Ibrahim, Khaled M. Ibrahim

Open Journal of Metal Vol.11 No.3, September 21, 2021

DOI: 10.4236/ojmetal.2021.113003 322 Downloads 1,549 Views Citations
Property Comparison of Golden Adornments with Different Characteristics Based on XRD (Articles)

Yijie Zhu, Danjing Hu, Qianyun Lu, Xuejun Yan, Qiujin Peng, Xu Zhang

Open Access Library Journal Vol.10 No.3, March 17, 2023

DOI: 10.4236/oalib.1109874 83 Downloads 817 Views Citations
Prediction of Wearing of Cutting Tools Using Real Time Machining Parameters and Temperature Using Rayleigh-Ham Method (Articles)

Jean Nyatte Nyatte, Fabrice Alban Epee, Wilba Christophe Kikmo, Samuel Batambock, Claude Valéry Ngayihi Abbe, Robert Nzengwa

Modern Mechanical Engineering Vol.13 No.2, May 31, 2023

DOI: 10.4236/mme.2023.132003 324 Downloads 1,116 Views Citations
Synthesis and Characterization of Cu-Co-Mn Alloys for Aeronautic Applications: Microstructural and Mechanical Performance (Articles)

Rene Guardia-Tapia, Juan Antonio Ruiz-Ochoa, Isai Rosales-Cadena

Materials Sciences and Applications Vol.17 No.4, April 2, 2026

DOI: 10.4236/msa.2026.174007 31 Downloads 239 Views Citations
Investigation on Two-Body Abrasive Wear Behavior of Silicon Carbide Filled Glass Fabric-Epoxy Composites (Articles)

N. Mohan, S. Natarajan, S.P. KumareshBabu, Siddaramaiah

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.3, March 20, 2010

DOI: 10.4236/jmmce.2010.93019 6,153 Downloads 8,671 Views Citations
Temporary Bearing Method in Construction of Continuous Beam Bridge Erected as Simply-Supported Beam (Articles)

Mehadi Hassan Rabby, Zhipei Guo, Miaoqiang Huang

Open Journal of Civil Engineering Vol.8 No.4, December 3, 2018

DOI: 10.4236/ojce.2018.84033 2,065 Downloads 5,619 Views Citations
Geological, Soil and Sediment Studies in Chelsaton Sedimentary Basin, Kabul, Afghanistan (Articles)

Hafizullah Rasouli, Abdul Ghias Safi

International Journal of Geosciences Vol.12 No.2, February 26, 2021

DOI: 10.4236/ijg.2021.122011 814 Downloads 2,666 Views Citations
Improvement in Tribological Properties of Surface Layer of an Al Alloy by Friction Stir Processing (Articles)

Soheyl Soleymani, Amir Abdollah-zadeh, Sima Ahamd Alidokht

Journal of Surface Engineered Materials and Advanced Technology Vol.1 No.3, October 18, 2011

DOI: 10.4236/jsemat.2011.13014 6,718 Downloads 12,046 Views Citations
Microstructure and Properties of Fe-Based Coating on Column Surface Formed by High Frequency Induction Cladding (Articles)

Huilong Yang, Yufu Sun, Jingjie Shen, Sumeng Hu, Qing Zhao, Xiangcai Jia, Jingchao Zhang

Journal of Surface Engineered Materials and Advanced Technology Vol.2 No.1, January 12, 2012

DOI: 10.4236/jsemat.2012.21007 3,986 Downloads 7,943 Views Citations
Tool Wear Classification Using Fuzzy Logic for Machining of Al/SiC Composite Material (Articles)

V. Kalaichelvi, R. Karthikeyan, D. Sivakumar, V. Srinivasan

Modeling and Numerical Simulation of Material Science Vol.2 No.2, April 16, 2012

DOI: 10.4236/mnsms.2012.22003 5,987 Downloads 13,495 Views Citations
The Role of Fillers on Friction and Slide Wear Characteristics in Glass-Epoxy Composite Systems (Articles)

B. Suresha, G. Chandramohan, J. N. Prakash, V. Balusamy, K. Sankaranarayanasamy

Journal of Minerals and Materials Characterization and Engineering Vol.5 No.1, June 12, 2006

DOI: 10.4236/jmmce.2006.51006 7,114 Downloads 10,479 Views Citations
Effect of Filler Materials on Dry Sliding Wear Behavior of Polymer Matrix Composites – A Taguchi Approach (Articles)

S. Basavarajappa, K.V. Arun, J. Paulo Davim

Journal of Minerals and Materials Characterization and Engineering Vol.8 No.5, May 20, 2009

DOI: 10.4236/jmmce.2009.85034 8,424 Downloads 12,488 Views Citations
Improvement of High Temperature Wear Resistance of AISI 316 ASS through NiCrBSiCFe Plasma Spray Coating (Articles)

N. L . Parthasarathi, Muthukannan Duraiselvam

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.7, July 20, 2010

DOI: 10.4236/jmmce.2010.97047 7,821 Downloads 10,478 Views Citations
Mechanical and Tribological Behavior of Particulate Reinforced Aluminum Metal Matrix Composites – a review (Articles)

G. B. Veeresh Kumar, C. S. P. Rao, N. Selvaraj

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.1, January 20, 2011

DOI: 10.4236/jmmce.2011.101005 17,704 Downloads 31,854 Views Citations
Sand Slurry Erosive Wear Behavior of Hot Extruded Al6061-SiC Composites (Articles)

C.S. Ramesh, R. Keshavamurthy

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.6, May 10, 2011

DOI: 10.4236/jmmce.2011.106037 6,379 Downloads 8,323 Views Citations
Machinability Study of Al-5Cu-TiB₂ In-situ Metal Matrix Composites Fabricated by Flux-assisted Synthesis (Articles)

A. Mahamani

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.13, November 1, 2011

DOI: 10.4236/jmmce.2011.1013097 4,143 Downloads 6,665 Views Citations
Analysis of Tool Wear Rate in Drilling Operation using Scanning Electron Microscope (SEM) (Articles)

Anil Jindal

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.1, January 20, 2012

DOI: 10.4236/jmmce.2012.111004 10,250 Downloads 13,373 Views Citations
Influence of Microstructure and Experimental Parameters on Mechanical and Wear Properties of Al-TiC Surface Composite by FSP Route (Articles)

S. Jerome, S. Govind Bhalchandra, S.P. Kumaresh Babu, B. Ravisankar

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.5, May 18, 2012

DOI: 10.4236/jmmce.2012.115035 5,902 Downloads 7,976 Views Citations

First <...456 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies