Hardness - Articles - Scientific Research Publishing

Scanning Electron Microscopy (SEM) Analysis and Hardness of Diffusion Bonded Titanium-Titanium and Titanium-Copper Plates with Static Force and without Interlayers (Articles)

Joel Hemanth

Open Journal of Composite Materials Vol.7 No.2, April 30, 2017

DOI: 10.4236/ojcm.2017.72007 1,545 Downloads 3,997 Views Citations
Study on the Effect of Production Parameters and Raw Materials Used on the Mechanical Properties of Leaded Brass (CuZn40Pb2) Alloy (Articles)

Abdulsalam A. Fadhil, Tawakol A. Enab, Magdy Samuel, Berlanty A. Iskander, Sami A. Ajeel

World Journal of Engineering and Technology Vol.5 No.2, May 27, 2017

DOI: 10.4236/wjet.2017.52028 1,985 Downloads 4,262 Views Citations
Influence of Si and Ge Microalloying Additions and Plastic Deformation on Precipitation Processes in Al-Cu Based Alloys (Articles)

Maria Victoria Castro Riglos, Alfredo Tolley

Journal of Minerals and Materials Characterization and Engineering Vol.6 No.3, May 17, 2018

DOI: 10.4236/jmmce.2018.63025 924 Downloads 2,159 Views Citations
Effects of Electrode Types on the Microstructure, Tensile and Hardness Properties of 304 L Austenitic Stainless Steel Heat-Affected Zone (HAZ) (Articles)

Bolarinwa Johnson Kutelu, Emmanuel Gbolade Adubi, Saliu Ojo Seidu

Journal of Minerals and Materials Characterization and Engineering Vol.6 No.5, August 31, 2018

DOI: 10.4236/jmmce.2018.65038 1,215 Downloads 2,927 Views Citations
Fatigue Performance of Heat Treated TC21 Ti-Alloy (Articles)

Ramadan N. Elshaer, Khaled M. Ibrahim, Azza F. Barakat, Reham R. Abbas

Open Journal of Metal Vol.9 No.2, June 30, 2019

DOI: 10.4236/ojmetal.2019.92002 813 Downloads 3,181 Views Citations
The Microstructure and Properties of Copper with Ceria Nanoparticles Addition (Articles)

Daniela Passarelo Moura da Fonseca, Waldemar Alfredo Monteiro

Journal of Materials Science and Chemical Engineering Vol.7 No.10, October 22, 2019

DOI: 10.4236/msce.2019.710004 612 Downloads 1,905 Views Citations
Study of the Physical, Mechanical and Thermal Properties of Banana Fiber Reinforced HDPE Composites (Articles)

Budrun Neher, Rakib Hossain, Kaniz Fatima, M. A. Gafur, Md. Abul Hossain, Farid Ahmed

Materials Sciences and Applications Vol.11 No.4, April 13, 2020

DOI: 10.4236/msa.2020.114017 1,620 Downloads 7,659 Views Citations
Analysis of Fatigue and Microhardness in Metallic Powder Mixed EDM (Articles)

Alexis Mouangué Nanimina, Nandiguim Lamaï, Djimako Bongo, Togdjim Jonas, Bonaventure Danoumbé, Ahmad Majdi Abdul-Rani

Open Journal of Applied Sciences Vol.10 No.10, October 13, 2020

DOI: 10.4236/ojapps.2020.1010043 677 Downloads 1,774 Views Citations
Improvement in Surface Roughness and Hardness for Carbon Steel by Slide Burnishing Process (Articles)

Hirotaka Kato, Wataru Hirokawa, Yoshikazu Todaka, Kazufumi Yasunaga

Materials Sciences and Applications Vol.12 No.5, May 8, 2021

DOI: 10.4236/msa.2021.125011 1,391 Downloads 3,722 Views Citations
This article belongs to the Special Issue on Material Processing
Influence of Plastic Deformation and Aging Process on Microstructure and Tensile Properties of Cast Ti-6Al-2Sn-2Zr-2Mo-1.5Cr-2Nb-0.1Si Alloy (Articles)

Mostafa S. S. El-Deeb, Khaled M. Ibrahim, S. S. Mohamed, Ramadan N. Elshaer

Open Journal of Metal Vol.11 No.2, June 17, 2021

DOI: 10.4236/ojmetal.2021.112002 417 Downloads 1,376 Views Citations
Comparative Evaluation of Calcium, Magnesium, Copper and Zinc Removal by Wood Ash, Sodium Carbonate and Sodium Hydrogen Phosphate (Articles)

Lovell Agwaramgbo, Jailen Doyle, Corneisja Harrison, Honour Williams

Journal of Environmental Protection Vol.12 No.7, July 7, 2021

DOI: 10.4236/jep.2021.127028 404 Downloads 2,059 Views Citations
Effect of Laser Cladding Processing Parameters on Nitinol’s Clad Dimensions, Microstructure, and Hardness (Articles)

Engy M. Zain, Ahmed Farid Youssef, Ahmad El Sabbagh, Sisa Pityana, Mohamed A. Taha

Materials Sciences and Applications Vol.12 No.12, December 24, 2021

DOI: 10.4236/msa.2021.1212040 378 Downloads 1,456 Views Citations
Wear Evaluation of Copper-Nickel-Aluminum Alloys under Extreme Conditions (Articles)

Rene Guardian, Isai Rosales-Cadena, Constancio Diaz-Reyes, Juan Antonio Ruiz-Ochoa

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.1, December 30, 2022

DOI: 10.4236/jmmce.2023.111002 274 Downloads 1,135 Views Citations
Application of Scanning Acoustic Microscopy for Detection of Dental Caries Lesion (Articles)

Yukihiro Naganuma, Kouki Hatori, Masahiro Iikubo, Masatoshi Takahashi, Yoshihiro Hagiwara, Kazuto Kobayashi, Atsushi Takahashi, Kumi Hoshi, Yoshifumi Saijo, Keiichi Sasaki

Open Journal of Stomatology Vol.13 No.1, January 17, 2023

DOI: 10.4236/ojst.2023.131002 311 Downloads 1,497 Views Citations
Empirical Investigation of Major Variables for Purification of Industrial Waste Water (Articles)

Peyman Haghighi, Farshad Farahbod

Advances in Nanoparticles Vol.12 No.3, July 7, 2023

DOI: 10.4236/anp.2023.123007 338 Downloads 1,323 Views Citations
Hydrogen Embrittlement of Nitrogenating Layer on Martensitic Alloys (Articles)

Daniel Moreno, Yohanan Nachmana, Shimon Bashan, Barak Weizman, Denis Panchenko, Michael Mansano, Elinor Itzhak, Moshe Shapira

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.5, September 8, 2023

DOI: 10.4236/jmmce.2023.115013 322 Downloads 1,514 Views Citations
Experimental Research of Impact Toughness of the Kazakhstani Construction Steel— Assessment of Compliance with the Provisions of 1993 Eurocode (Articles)

Begman Kulbayev, Vladimir Lapin, Alexander Shakhnovich, Tursymbai Tuleyev, Serik Aldakhov, Yerken Aldakhov, Alimzhan Ali

Open Journal of Civil Engineering Vol.13 No.4, December 7, 2023

DOI: 10.4236/ojce.2023.134044 194 Downloads 742 Views Citations
Graphite Carbone Structure (Articles)

Lahbib Abbas, Lahcen Bih, Khalid Yamni, Abderrahim Elyahyaouy, Abdelmalik El Attaoui, Zahra Ramzi

Crystal Structure Theory and Applications Vol.12 No.1, February 29, 2024

DOI: 10.4236/csta.2024.121001 521 Downloads 2,906 Views Citations
Pillow Material and Hardness Affects Head and Neck Pressure Distribution in Supine Position (Articles)

Mutsumi Takahashi, Yogetsu Bando, Takuya Fukui

Advances in Physical Education Vol.14 No.4, November 12, 2024

DOI: 10.4236/ape.2024.144014 139 Downloads 1,191 Views Citations
Numerical Simulation and Analysis of Heat Treatment Processes on AISI 1025 Steel Produced by Laser Engineered Net Shaping (Articles)

Elphas Tum, Rehema Ndeda, James Mutua, Raghupatruni Prasad, Eyitao Olakanmi, Sisa Pityana

Modeling and Numerical Simulation of Material Science Vol.15 No.1, November 14, 2024

DOI: 10.4236/mnsms.2025.151001 159 Downloads 1,079 Views Citations

First <...456 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies