Wear - Articles - Scientific Research Publishing

Prediction of Wearing of Cutting Tools Using Real Time Machining Parameters and Temperature Using Rayleigh-Ham Method (Articles)

Jean Nyatte Nyatte, Fabrice Alban Epee, Wilba Christophe Kikmo, Samuel Batambock, Claude Valéry Ngayihi Abbe, Robert Nzengwa

Modern Mechanical Engineering Vol.13 No.2, May 31, 2023

DOI: 10.4236/mme.2023.132003 378 Downloads 1,210 Views Citations
Synthesis and Characterization of Cu-Co-Mn Alloys for Aeronautic Applications: Microstructural and Mechanical Performance (Articles)

Rene Guardia-Tapia, Juan Antonio Ruiz-Ochoa, Isai Rosales-Cadena

Materials Sciences and Applications Vol.17 No.4, April 2, 2026

DOI: 10.4236/msa.2026.174007 58 Downloads 309 Views Citations
Investigation on Two-Body Abrasive Wear Behavior of Silicon Carbide Filled Glass Fabric-Epoxy Composites (Articles)

N. Mohan, S. Natarajan, S.P. KumareshBabu, Siddaramaiah

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.3, March 20, 2010

DOI: 10.4236/jmmce.2010.93019 6,187 Downloads 8,714 Views Citations
Improvement in Tribological Properties of Surface Layer of an Al Alloy by Friction Stir Processing (Articles)

Soheyl Soleymani, Amir Abdollah-zadeh, Sima Ahamd Alidokht

Journal of Surface Engineered Materials and Advanced Technology Vol.1 No.3, October 18, 2011

DOI: 10.4236/jsemat.2011.13014 6,781 Downloads 12,156 Views Citations
Microstructure and Properties of Fe-Based Coating on Column Surface Formed by High Frequency Induction Cladding (Articles)

Huilong Yang, Yufu Sun, Jingjie Shen, Sumeng Hu, Qing Zhao, Xiangcai Jia, Jingchao Zhang

Journal of Surface Engineered Materials and Advanced Technology Vol.2 No.1, January 12, 2012

DOI: 10.4236/jsemat.2012.21007 4,026 Downloads 8,026 Views Citations
Tool Wear Classification Using Fuzzy Logic for Machining of Al/SiC Composite Material (Articles)

V. Kalaichelvi, R. Karthikeyan, D. Sivakumar, V. Srinivasan

Modeling and Numerical Simulation of Material Science Vol.2 No.2, April 16, 2012

DOI: 10.4236/mnsms.2012.22003 6,040 Downloads 13,581 Views Citations
The Role of Fillers on Friction and Slide Wear Characteristics in Glass-Epoxy Composite Systems (Articles)

B. Suresha, G. Chandramohan, J. N. Prakash, V. Balusamy, K. Sankaranarayanasamy

Journal of Minerals and Materials Characterization and Engineering Vol.5 No.1, June 12, 2006

DOI: 10.4236/jmmce.2006.51006 7,138 Downloads 10,550 Views Citations
Effect of Filler Materials on Dry Sliding Wear Behavior of Polymer Matrix Composites – A Taguchi Approach (Articles)

S. Basavarajappa, K.V. Arun, J. Paulo Davim

Journal of Minerals and Materials Characterization and Engineering Vol.8 No.5, May 20, 2009

DOI: 10.4236/jmmce.2009.85034 8,457 Downloads 12,577 Views Citations
Improvement of High Temperature Wear Resistance of AISI 316 ASS through NiCrBSiCFe Plasma Spray Coating (Articles)

N. L . Parthasarathi, Muthukannan Duraiselvam

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.7, July 20, 2010

DOI: 10.4236/jmmce.2010.97047 7,865 Downloads 10,559 Views Citations
Mechanical and Tribological Behavior of Particulate Reinforced Aluminum Metal Matrix Composites – a review (Articles)

G. B. Veeresh Kumar, C. S. P. Rao, N. Selvaraj

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.1, January 20, 2011

DOI: 10.4236/jmmce.2011.101005 17,738 Downloads 31,998 Views Citations
Sand Slurry Erosive Wear Behavior of Hot Extruded Al6061-SiC Composites (Articles)

C.S. Ramesh, R. Keshavamurthy

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.6, May 10, 2011

DOI: 10.4236/jmmce.2011.106037 6,430 Downloads 8,407 Views Citations
Machinability Study of Al-5Cu-TiB₂ In-situ Metal Matrix Composites Fabricated by Flux-assisted Synthesis (Articles)

A. Mahamani

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.13, November 1, 2011

DOI: 10.4236/jmmce.2011.1013097 4,176 Downloads 6,729 Views Citations
Analysis of Tool Wear Rate in Drilling Operation using Scanning Electron Microscope (SEM) (Articles)

Anil Jindal

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.1, January 20, 2012

DOI: 10.4236/jmmce.2012.111004 10,282 Downloads 13,451 Views Citations
Influence of Microstructure and Experimental Parameters on Mechanical and Wear Properties of Al-TiC Surface Composite by FSP Route (Articles)

S. Jerome, S. Govind Bhalchandra, S.P. Kumaresh Babu, B. Ravisankar

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.5, May 18, 2012

DOI: 10.4236/jmmce.2012.115035 5,942 Downloads 8,059 Views Citations
Dry Sliding Wear Behaviour of Aluminium/Be₃Al₂(SiO₃)₆ Composite Using Taguchi Method (Articles)

H. B. Bhaskar, Abdul Sharief

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.7, July 25, 2012

DOI: 10.4236/jmmce.2012.117052 6,005 Downloads 9,072 Views Citations
Effect of Filler Content and Alkalization on Mechanical and Erosion Wear Behavior of CBPD Filled Bamboo Fiber Composites (Articles)

Anu Gupta, Ajit Kumar, Amar Patnaik, Sandhyarani Biswas

Journal of Surface Engineered Materials and Advanced Technology Vol.2 No.3, July 25, 2012

DOI: 10.4236/jsemat.2012.23024 6,030 Downloads 11,515 Views Citations
Evaluate the Effects of Various Surface Roughness on the Tribological Characteristics under Dry and Lubricated Conditions for Al-Si Alloy (Articles)

Riyadh A. Al-Samarai, Haftirman, Khairel Rafezi Ahmad, Y. Al-Douri

Journal of Surface Engineered Materials and Advanced Technology Vol.2 No.3, July 25, 2012

DOI: 10.4236/jsemat.2012.23027 8,201 Downloads 13,330 Views Citations
Morphology and solid particle erosion wear behavior of red mud composite coatings (Articles)

Harekrushna Sutar, Subash Chandra Mishra, Santosh Kumar Sahoo, Alok Satapathy, Vikas Kumar

Natural Science Vol.4 No.11, November 22, 2012

DOI: 10.4236/ns.2012.411111 4,981 Downloads 8,051 Views Citations
Continuous Wear of Hydrogel Contact Lenses for Therapeutic Use (Articles)

Daisuke Kudo, Hiroshi Toshida, Toshihiko Ohta, Akira Murakami

Open Journal of Ophthalmology Vol.2 No.4, November 23, 2012

DOI: 10.4236/ojoph.2012.24023 4,520 Downloads 7,950 Views Citations
Wear Behaviour of Al-SiCp Metal Matrix Composites and Optimization Using Taguchi Method and Grey Relational Analysis (Articles)

Shouvik Ghosh, Prasanta Sahoo, Goutam Sutradhar

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.11, November 30, 2012

DOI: 10.4236/jmmce.2012.1111115 6,884 Downloads 11,559 Views Citations

First <...345 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies