Stainless Steel AISI 304 - Articles - Scientific Research Publishing

Bi-Modal Failure Mechanism of Rolling Contact Bearings (Articles)

Y. Meged

Advances in Materials Physics and Chemistry Vol.10 No.10, October 27, 2020

DOI: 10.4236/ampc.2020.1010017 490 Downloads 1,393 Views Citations
In Vitro Evaluation of Bacterial Adhesion to Dental and Stainless-Steel Surfaces (Articles)

A. El Aouame, F. El Quars, Z. Bentahar, K. Zerouali, M. Sidqui

Open Journal of Medical Microbiology Vol.11 No.3, September 14, 2021

DOI: 10.4236/ojmm.2021.113014 420 Downloads 1,832 Views Citations
Failure Analysis of Austenitic Stainless Steel Implant Screws and Prospection of Chemical Composition Using Artificial Intelligence (Articles)

Alfonso Monzamodeth Román-Sedano, Bernardo Campillo, Fermín Castillo, Osvaldo Flores

World Journal of Engineering and Technology Vol.10 No.1, February 25, 2022

DOI: 10.4236/wjet.2022.101006 361 Downloads 1,865 Views Citations
Calculation and Study on the Exposure Buildup Factor of Type 316 Stainless Steel (Articles)

Dan Li, Yinglei Guo, Guangxi Wang, Liangquan Ge

Open Access Library Journal Vol.9 No.5, May 23, 2022

DOI: 10.4236/oalib.1108679 198 Downloads 2,160 Views Citations
In Vitro Study Comparative of Bacterial Adhesion on Dental Surfaces, on Stainless-Steel Surfaces and on Titanium Surfaces (Articles)

Amal Elaouame, Omar Ziyati, Chaimae Belabsir, Khalid Zerouali, Mustapha Sidqui

Open Access Library Journal Vol.11 No.10, October 11, 2024

DOI: 10.4236/oalib.1111908 68 Downloads 557 Views Citations
Influence of Scanning Patterns on Mechanical Behavior and Distortion in Laser Directed Energy Deposition (Articles)

Qi Wang, Bingjie Xiao, Shaopeng Zheng

Journal of Applied Mathematics and Physics Vol.12 No.11, November 25, 2024

DOI: 10.4236/jamp.2024.1211231 133 Downloads 965 Views Citations
Accurate Control of Oxide Ions Content for Corrosion Studies: Application to SS316L and Its Alloying Elements in Molten LiCl-KCl (Articles)

Thibaut Fourès, Mathieu Gibilaro, Laurent Massot, Elisa Capelli, Bertrand Morel, Pierre Chamelot

Materials Sciences and Applications Vol.15 No.12, December 31, 2024

DOI: 10.4236/msa.2024.1512038 147 Downloads 702 Views Citations
Experimental Investigation of Laser Surface Hardening of AISI 4340 Steel Using Different Laser Scanning Patterns (Articles)

Baha Tarchoun, Abderrazak El Ouafi, Ahmed Chebak

Journal of Minerals and Materials Characterization and Engineering Vol.8 No.2, March 10, 2020

DOI: 10.4236/jmmce.2020.82002 700 Downloads 2,631 Views Citations
Numerical Investigation of Laser Surface Hardening of AISI 4340 Using 3D FEM Model for Thermal Analysis of Different Laser Scanning Patterns (Articles)

Baha Tarchoun, Abderrazak El Ouafi, Ahmed Chebak

Modeling and Numerical Simulation of Material Science Vol.10 No.3, July 17, 2020

DOI: 10.4236/mnsms.2020.103003 795 Downloads 2,105 Views Citations
Hybrid Method for the Formation of Biocomposites on the Surface of Stainless Steel Implants (Articles)

Sergei I. Tverdokhlebov, Viktor P. Ignatov, Igor B. Stepanov, Denis O. Sivin, Danila G. Petlin

Engineering Vol.4 No.10, October 11, 2012

DOI: 10.4236/eng.2012.410078 5,709 Downloads 7,861 Views Citations
The Phenomenon of High Hardness Values on the S-Phase Layer of Austenitic Stainless Steel via Screen Plasma Nitriding Process (Articles)

Sang-Gweon Kim, Kook-Hyun Yeo, Yong-Ki Cho, Jae-Hoon Lee, Masahiro Okumiya

Advances in Materials Physics and Chemistry Vol.8 No.6, June 29, 2018

DOI: 10.4236/ampc.2018.86017 1,315 Downloads 3,539 Views Citations
Review of GTAW Welding Parameters (Articles)

Bolarinwa Johnson Kutelu, Saliu Ojo Seidu, Godwin Idenala Eghabor, Ayotunde Idris Ibitoye

Journal of Minerals and Materials Characterization and Engineering Vol.6 No.5, August 31, 2018

DOI: 10.4236/jmmce.2018.65039 5,571 Downloads 15,130 Views Citations
Wave Processes and Mass Transfer on the Copper-Stainless Steel Interface under Solid Phase Bonding by High-Temperature Rolling (Articles)

Boris V. Borts, Aleksander A. Parkhomenko, Igor O. Vorobyov, Alexander A. Lopata

Open Journal of Metal Vol.8 No.4, December 29, 2018

DOI: 10.4236/ojmetal.2018.84005 811 Downloads 1,742 Views Citations
Effect of Laser Beam Welding Parameters on Microstructure and Properties of Duplex Stainless Steel (Articles)

Abdel-Monem El-Batahgy, Abdel-Fattah Khourshid, Thoria Sharef

Materials Sciences and Applications Vol.2 No.10, October 17, 2011

DOI: 10.4236/msa.2011.210195 9,105 Downloads 17,268 Views Citations
Analytical Method to Monitor Industrial Pickling Baths Initially Constituted by HF, HNO₃ (Articles)

Brigitte Dustou, Laure Latapie, Fabien Chauvet, Jean-Michel Bergerat, Theodore Tzedakis

Journal of Analytical Sciences, Methods and Instrumentation Vol.7 No.4, December 29, 2017

DOI: 10.4236/jasmi.2017.74009 2,878 Downloads 6,516 Views Citations
The Processability Improvement of Duplex Stainless Steel (Articles)

Shangtan Liu, Jann van Benthem

Open Access Library Journal Vol.3 No.4, April 18, 2016

DOI: 10.4236/oalib.1102579 1,728 Downloads 4,505 Views Citations
Erosion Behavior of AISI 6061-T6 (Articles)

Juan Rodrigo Laguna-Camacho, Hermilo Martínez-García, Frumencio Escamilla-Rodríguez, Carlos Alarcón-Rosas, Celia María Calderón-Ramón, Lizeth Ríos-Velasco, Lizeth Ríos-Velasco, Matilde Pelcastre-Lozano, Álvaro Casados-Sánchez, Melesio González-Gómez

Journal of Surface Engineered Materials and Advanced Technology Vol.5 No.3, June 15, 2015

DOI: 10.4236/jsemat.2015.53015 5,363 Downloads 6,971 Views Citations
Comparative Study of the Effect of Temperature on the Corrosion Behaviour of 2205 Duplex Stainless Steel and 316 Austenitic Stainless Steel in Acidic Chloride Environment (Articles)

O. A. Olaseinde

Advances in Materials Physics and Chemistry Vol.5 No.5, May 26, 2015

DOI: 10.4236/ampc.2015.55019 7,057 Downloads 9,390 Views Citations
Mathematical Modeling Algorithms for Creating New Materials with Desired Properties Using Nano-Hierarchical Structures (Articles)

Olga Hachay, Andrey Khachay, Oleg Khachay

Advances in Materials Physics and Chemistry Vol.9 No.11, November 29, 2019

DOI: 10.4236/ampc.2019.911016 530 Downloads 1,329 Views Citations
Improvement of High Temperature Wear Resistance of AISI 316 ASS through NiCrBSiCFe Plasma Spray Coating (Articles)

N. L . Parthasarathi, Muthukannan Duraiselvam

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.7, July 20, 2010

DOI: 10.4236/jmmce.2010.97047 7,821 Downloads 10,477 Views Citations

First <...345 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies