Roughness Height - Articles - Scientific Research Publishing

Perspective on the Body Mass Index (BMI) and Variability of Human Weight and Height (Articles)

Mark P. Silverman

Journal of Biosciences and Medicines Vol.13 No.6, June 30, 2025

DOI: 10.4236/jbm.2025.136026 149 Downloads 1,126 Views Citations
Influence of Cutting Speed, Feed Rate and Bulk Texture on the Surface Finish of Nitrogen Alloyed Duplex Stainless Steels during Dry Turning (Articles)

D. Philip Selvaraj, P. Chandramohan

Engineering Vol.2 No.6, July 1, 2010

DOI: 10.4236/eng.2010.26059 9,456 Downloads 16,748 Views Citations
Surface Roughness Evaluation in Dry-Cutting of Magnesium Alloy by Air Pressure Coolant (Articles)

Jeong-Du Kim, Keon-Beom Lee

Engineering Vol.2 No.10, November 29, 2010

DOI: 10.4236/eng.2010.210101 6,446 Downloads 11,180 Views Citations
Machinability Study of Al-5Cu-TiB₂ In-situ Metal Matrix Composites Fabricated by Flux-assisted Synthesis (Articles)

A. Mahamani

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.13, November 1, 2011

DOI: 10.4236/jmmce.2011.1013097 4,176 Downloads 6,729 Views Citations
Evaluate the Effects of Various Surface Roughness on the Tribological Characteristics under Dry and Lubricated Conditions for Al-Si Alloy (Articles)

Riyadh A. Al-Samarai, Haftirman, Khairel Rafezi Ahmad, Y. Al-Douri

Journal of Surface Engineered Materials and Advanced Technology Vol.2 No.3, July 25, 2012

DOI: 10.4236/jsemat.2012.23027 8,202 Downloads 13,333 Views Citations
Relative Depth Effects on Corrugated Culvert Roughness (Articles)

Jonathan Scott Toews, Shawn Paul Clark

Journal of Water Resource and Protection Vol.4 No.10, October 30, 2012

DOI: 10.4236/jwarp.2012.410096 4,574 Downloads 7,017 Views Citations
Evaluation of a Simple Hydraulic Resistance Model Using Flow Measurements Collected in Vegetated Waterways (Articles)

Fredrik Huthoff, Menno W. Straatsma, Denie C. M. Augustijn, Suzanne J. M. H. Hulscher

Open Journal of Modern Hydrology Vol.3 No.1, January 28, 2013

DOI: 10.4236/ojmh.2013.31005 4,502 Downloads 8,452 Views Citations
Understanding of Ultrasonic Assisted Machining with Diamond Grinding Tool (Articles)

Kyung-Hee Park, Yun-Hyuck Hong, Kyeong-Tae Kim, Seok-Woo Lee, Hon-Zong Choi, Young-Jae Choi

Modern Mechanical Engineering Vol.4 No.1, December 30, 2013

DOI: 10.4236/mme.2014.41001 7,784 Downloads 15,944 Views Citations
A Contact Model for Establishment of Hip Joint Implant Wear Metrics (Articles)

Mohammad Hodaei, Kambiz Farhang, Nazanin Maani

Journal of Biomedical Science and Engineering Vol.7 No.4, March 20, 2014

DOI: 10.4236/jbise.2014.74026 5,488 Downloads 8,676 Views Citations
Comparative Response of CRL-11372 Cells to Surface Roughness and Crystalline Structure of the Surfaces Developed by Sandblasting, Etching, and TiO₂ Coating on Commercially Pure Ti Discs (Articles)

Sinem Yeniyol, Bahadır Kepenek, Ayhan Bilir, Ali Fuat Çakır, Nilüfer Bölükbaşı, Mefail Yeniyol, Tayfun Özdemir

Materials Sciences and Applications Vol.5 No.5, March 31, 2014

DOI: 10.4236/msa.2014.55029 3,643 Downloads 5,959 Views Citations
Comparative Assessment on Machinability of Nano-Structured Bainitic Steel and Titanium64 (Articles)

Ashwin Polishetty, Chinmay Sonavane, Prasad Patil, Guy Littlefair

Journal of Materials Science and Chemical Engineering Vol.2 No.7, July 8, 2014

DOI: 10.4236/msce.2014.27004 2,625 Downloads 4,347 Views Citations
Dependence of Atomic-Scale Si(110) Surface Roughness on Hydrogen Introduction Temperature after High-Temperature Ar Annealing (Articles)

Koji Araki, Ryuji Takeda, Haruo Sudo, Koji Izunome, Xinwei Zhao

Journal of Surface Engineered Materials and Advanced Technology Vol.4 No.5, August 6, 2014

DOI: 10.4236/jsemat.2014.45028 4,900 Downloads 6,901 Views Citations
This article belongs to the Special Issue on Surface Modification
Numerical and Experimental Study of the Roughness Effects on Mechanical Properties of AISI316L by Nanoindentation (Articles)

Ling Chen, Aylin Ahadi, Jinming Zhou, Jan-Eric Ståhl

Modeling and Numerical Simulation of Material Science Vol.4 No.4, October 10, 2014

DOI: 10.4236/mnsms.2014.44017 5,638 Downloads 7,490 Views Citations
Surface Roughness Modification of Free Standing Single Crystal Silicon Microstructures Using KrF Excimer Laser Treatment for Mechanical Performance Improvement (Articles)

Mohamed Elwi Mitwally, Toshiyuki Tsuchiya, Osamu Tabata, Sherif Sedky

Journal of Surface Engineered Materials and Advanced Technology Vol.5 No.1, January 6, 2015

DOI: 10.4236/jsemat.2015.51004 3,742 Downloads 5,064 Views Citations
This article belongs to the Special Issue on Surface and Interface of Materials
Studying the Preheating Effect on Certain Mechanical Properties of the Coating Layer by Vacuum Ion Plasma Coating (Articles)

Abdul Jaleel Hamad Majeed

Modern Mechanical Engineering Vol.5 No.4, November 11, 2015

DOI: 10.4236/mme.2015.54010 4,435 Downloads 5,697 Views Citations
Evaluation of Surface Roughness of Metal and Alloy Material (Articles)

Joon-Seong Lee

Journal of Materials Science and Chemical Engineering Vol.4 No.1, January 11, 2016

DOI: 10.4236/msce.2016.41013 4,483 Downloads 7,179 Views Citations
Investigating the Effect of Relative Width on Momentum Transfer between Main Channel and Floodplain in Rough Rectangular Compound Channel Sunder Varius Relative Depth Condition (Articles)

Shima Bahadori, Mehdi Behdarvandi Askar

Open Journal of Geology Vol.6 No.4, April 13, 2016

DOI: 10.4236/ojg.2016.64020 2,441 Downloads 3,622 Views Citations
Recurrence Quantification Analysis of Rough Surfaces Applied to Optical and Speckle Profiles (Articles)

Oscar Sarmiento Martinez, Darwin Mayorga Cruz, Jorge Uruchurtu Chavarín, Estela Sarmiento Bustos

Journal of Applied Mathematics and Physics Vol.4 No.4, April 27, 2016

DOI: 10.4236/jamp.2016.44083 2,075 Downloads 3,641 Views Citations
Determining the Effect of Cutting Fluids on Surface Roughness in Turning AISI 1330 Alloy Steel Using Taguchi Method (Articles)

Onyemachi Joachim Onuoha, James Oseni Abu, Sunday Albert Lawal, Edeki Mudiare, Michael Bolaji Adeyemi

Modern Mechanical Engineering Vol.6 No.2, May 5, 2016

DOI: 10.4236/mme.2016.62006 4,141 Downloads 7,653 Views Citations
Neural Network Modeling and Prediction of Surface Roughness in Machining Aluminum Alloys (Articles)

N. Fang, N. Fang, P. Srinivasa Pai, N. Edwards

Journal of Computer and Communications Vol.4 No.5, May 13, 2016

DOI: 10.4236/jcc.2016.45001 3,093 Downloads 5,072 Views Citations

First <...345 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies