Normalizing; Hardening; Tempering; Impact Toughness; Tension; Spring - Articles

Interlaminar Fracture Toughness of Epoxy Glass Fiber Fly Ash Laminate Composite (Articles)

Ajit Bhandakkar, Niraj Kumar, R. C. Prasad, Shankar M. L. Sastry

Materials Sciences and Applications Vol.5 No.4, March 28, 2014

DOI: 10.4236/msa.2014.54028 6,394 Downloads 8,977 Views Citations
Interfacial Fracture Toughness Evaluation of Poly(L-lactide acid)/Natural Fiber Composite by Using Double Shear Test Method (Articles)

Chin Voon Sia, Yoshikazu Nakai, Hiroshi Tanaka, Daiki Shiozawa

Open Journal of Composite Materials Vol.4 No.2, April 10, 2014

DOI: 10.4236/ojcm.2014.42011 4,743 Downloads 7,841 Views Citations
The Effect of Copper Addition on the Mechanical and Wear Properties of Grey Cast Iron (Articles)

J. O. Agunsoye, S. A. Bello, S. B. Hassan, R. G. Adeyemo, J. M. Odii

Journal of Minerals and Materials Characterization and Engineering Vol.2 No.5, September 24, 2014

DOI: 10.4236/jmmce.2014.25048 7,633 Downloads 12,166 Views Citations
Defects Interaction on the Mechanical Properties during Transition Formation of (Mo, Cr)₃Si Intermetallic Alloys (Articles)

I. Rosales, H. Martínez

Journal of Materials Science and Chemical Engineering Vol.2 No.11, November 19, 2014

DOI: 10.4236/msce.2014.211009 5,012 Downloads 5,960 Views Citations
Effect of Fillers on Mechanical Properties and Fracture Toughness of Glass Fabric Reinforced Epoxy Composites (Articles)

Basappa Hulugappa, Mysuru V. Achutha, Bheemappa Suresha

Journal of Minerals and Materials Characterization and Engineering Vol.4 No.1, January 13, 2016

DOI: 10.4236/jmmce.2016.41001 5,802 Downloads 10,142 Views Citations
Influence of Macro-Topography on Damage Tolerance and Fracture Toughness of Monolithic Epoxy for Tribological Applications (Articles)

Rasheed Atif, Fawad Inam

World Journal of Engineering and Technology Vol.4 No.2, May 31, 2016

DOI: 10.4236/wjet.2016.42034 2,642 Downloads 3,998 Views Citations
The Effects of Psychological Skills Training on Mental Toughness and Psychological Well-Being of Student-Athletes (Articles)

Jim Golby, Phillippa Wood

Psychology Vol.7 No.6, June 22, 2016

DOI: 10.4236/psych.2016.76092 21,493 Downloads 31,884 Views Citations
This article belongs to the Special Issue on Positive Psychology Research
Property and Oxidation Behaviours of (Mo,Cr)Si2 + ZrO2 Composite Produced by Pressure-Less Sintering (Articles)

Yiming Yao, Erik Ström, Xin-Hai Li, Qin Lu

Journal of Materials Science and Chemical Engineering Vol.4 No.7, July 25, 2016

DOI: 10.4236/msce.2016.47003 1,762 Downloads 2,805 Views Citations
Fractography Analysis of Monolithic Epoxy with Tailored Topography (Articles)

Rasheed Atif, Fawad Inam

World Journal of Engineering and Technology Vol.4 No.4, October 14, 2016

DOI: 10.4236/wjet.2016.44051 1,693 Downloads 2,879 Views Citations
A Systems-Approach Model of Mental Toughness: Understanding Inputs, Processes and Outputs (Articles)

Sarah Sorensen, Grant Schofield, Aaron Jarden

Psychology Vol.7 No.12, November 3, 2016

DOI: 10.4236/psych.2016.712141 2,636 Downloads 8,736 Views Citations
This article belongs to the Special Issue on Mental Stress and Psychology
Influence of MIG/MAG Welding Process on Mechanical and Pitting Corrosion Behaviors on the Super-Duplex Stainless Steel SAF 2507 Welded Joints (Articles)

Bruno Leonardy S. Lopes, Samuel F. Rodrigues, Eden S. Silva, Gedeon S. Reis, Waldemir dos P. Martins, Juvenilson Costa Damascena, Valdemar S. Leal

Materials Sciences and Applications Vol.9 No.2, February 5, 2018

DOI: 10.4236/msa.2018.92015 1,527 Downloads 3,978 Views Citations
Aggregate Suitability Assessment of Wargal Limestone for Pavement Construction in Pakistan (Articles)

Javid Hussain, Jiaming Zhang, Fitriani Fitria, Muhammad Shoaib, Hadi Hussain, Ali Asghar, Sadam Hussain

Open Journal of Civil Engineering Vol.12 No.1, February 23, 2022

DOI: 10.4236/ojce.2022.121005 555 Downloads 2,497 Views Citations
Influence of the Mode of Discrete Drum Speed and the Number of Inputs on the Technological Parameters of the Yarn Produced (Articles)

Yuldashev Jamshid

Engineering Vol.14 No.12, December 26, 2022

DOI: 10.4236/eng.2022.1412040 249 Downloads 776 Views Citations
Tackling Mental Health: A Pre-Post Study of College Athletes’ Wellbeing (Articles)

Alison Ellis, Angelina MacKewn, Laura Brown, Angelina Culley, Ashley Bynum

Psychology Vol.16 No.2, February 24, 2025

DOI: 10.4236/psych.2025.162013 172 Downloads 1,478 Views Citations
Isotropic Elastoplasticity Fully Coupled with Non-Local Damage (Articles)

M. Almansba, K. Saanouni, N. E. Hannachi

Engineering Vol.2 No.6, July 1, 2010

DOI: 10.4236/eng.2010.26055 6,152 Downloads 11,115 Views Citations
Effect of Slow Cooling in Reducing Pore Size in a Sintered Powder Metallurgical 6061Aluminium Alloy (Articles)

S. Solay Anand, B. Mohan, T. R. Parthasarathy

Materials Sciences and Applications Vol.2 No.7, July 29, 2011

DOI: 10.4236/msa.2011.27117 6,249 Downloads 11,288 Views Citations
Effect of Precipitation Hardening on Hardness and Microstructure of Austenitic Manganese Steel (Articles)

S. Aribo, K.K. Alaneme, D.O. Folorunso, F.O. Aramide

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.2, February 20, 2010

DOI: 10.4236/jmmce.2010.92014 7,881 Downloads 11,355 Views Citations
The Effect of Time, Percent of Copper and Nickel on the Natural Precipitation Hardness of Al – Cu – Ni Powder Metallurgy Alloys Using Design of Experiments (Articles)

Mohammad M. Hamasha, Ahmad T. Mayyas, Mohammed T. Hayajneh, Adel M. Hassan

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.6, May 10, 2011

DOI: 10.4236/jmmce.2011.106036 5,889 Downloads 7,938 Views Citations
The Effect of Time, Percent of Copper and Nickel on Naturally Aged Al-Cu-Ni Cast Alloys (Articles)

Mohammad M. Hamasha, Ahmad T. Mayyas, Adel M. Hassan, Mohammed T. Hayajneh

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.2, February 20, 2012

DOI: 10.4236/jmmce.2012.112009 6,323 Downloads 8,280 Views Citations
Effect of Heat Treatment Processes on the Mechanical Properties of Medium Carbon Steel (Articles)

T. Senthilkumar, T. K. Ajiboye

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.2, February 20, 2012

DOI: 10.4236/jmmce.2012.112011 18,158 Downloads 28,272 Views Citations

First <...345 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies