Microindentation; Hv Microhardness; Work Hardening; Plastic Deformation - Articles

Thermal Analysis of the Impact of RT Storage Time on the Strengthening of an Al-Mg-Si Alloy (Articles)

A. Hayoune

Materials Sciences and Applications Vol.3 No.7, July 19, 2012

DOI: 10.4236/msa.2012.37065 3,330 Downloads 6,165 Views Citations
Electrospark Coatings Based on WC-Co Alloys with Aluminium Oxide and Carbon Additives (Articles)

Sergey A. Pyachin, Sergey V. Nikolenko, Alexander A. Burkov, Nikolay A. Suy

Materials Sciences and Applications Vol.4 No.3, March 29, 2013

DOI: 10.4236/msa.2013.43022 4,438 Downloads 7,172 Views Citations
The Effect of the Light Intensity and Light Distances of LED and QTH Curing Devices on the Hardness of Two Light-Cured Nano-Resin Composites (Articles)

Pnina Segal, Diva Lugassy, Eitan Mijiritsky, Michal Dekel, Ariel Ben-Amar, Zeev Ormianer, Shlomo Matalon

Materials Sciences and Applications Vol.6 No.11, November 27, 2015

DOI: 10.4236/msa.2015.611106 5,733 Downloads 9,248 Views Citations
This article belongs to the Special Issue on Dental Materials
Influence of MIG/MAG Welding Process on Mechanical and Pitting Corrosion Behaviors on the Super-Duplex Stainless Steel SAF 2507 Welded Joints (Articles)

Bruno Leonardy S. Lopes, Samuel F. Rodrigues, Eden S. Silva, Gedeon S. Reis, Waldemir dos P. Martins, Juvenilson Costa Damascena, Valdemar S. Leal

Materials Sciences and Applications Vol.9 No.2, February 5, 2018

DOI: 10.4236/msa.2018.92015 1,527 Downloads 3,978 Views Citations
On the Vickers Microhardness and Wide-Angle X-Ray Line Width for Characterization of the Oxidative Stability of Poly(ethylene-co-propylene) Pipes (Articles)

Anton Atanassov Apostolov

Materials Sciences and Applications Vol.10 No.1, January 8, 2019

DOI: 10.4236/msa.2019.101003 823 Downloads 1,483 Views Citations
The Copper Thin Layer Deposition by Pulse Vacuum-Arc Sprayer (Articles)

A. M. Zhukeshov, А. T. Gabdullina, B. M. Ibraev, M. Mukhamedryskyzy, А. U. Amrenova, E. Baltabai

Materials Sciences and Applications Vol.11 No.3, March 4, 2020

DOI: 10.4236/msa.2020.113011 610 Downloads 1,709 Views Citations
Microstructures and Mechanical Properties of Al-Zn-Sn Bearing Alloys for High Performance Applications (Articles)

Nermin Ali Abdelhakim, Rizk Mostafa Shalaby

World Journal of Engineering and Technology Vol.9 No.3, August 17, 2021

DOI: 10.4236/wjet.2021.93045 444 Downloads 2,338 Views Citations
Optimize Multiple Peening Effects on Surface Integrity and Microhardness of Aluminum Alloy Induced by LSP (Articles)

Enoch Asuako Larson, Samuel Adu-Gyamfi, Milku Augustine, Philip Yamba, Jamal-Deen Kukurah, Karimu Abdulai, Joseph Sekyi-Ansah, Osman Abdul-Razak, Emmanuel A. Akurugu, Aston Kuzmin

Materials Sciences and Applications Vol.14 No.3, March 23, 2023

DOI: 10.4236/msa.2023.143012 282 Downloads 1,138 Views Citations
Legal and Sociological Analyses on Telework at Home in Brazil (Articles)

Márcia Regina Castro Barroso

Open Journal of Social Sciences Vol.2 No.6, June 20, 2014

DOI: 10.4236/jss.2014.26057 3,807 Downloads 5,338 Views Citations
The Compactions of Elasto-Plastic and Visco-Plastic Granular Assemblies (Articles)

Pengfei He, Yuching Wu, Huiliang Chen

Open Journal of Civil Engineering Vol.3 No.1, March 29, 2013

DOI: 10.4236/ojce.2013.31005 4,285 Downloads 7,605 Views Citations
Presence of Microplastic in Personal Care and Cosmetic Products from Markets in Punjab, Pakistan (Articles)

Sajjad Hussain, Nuzhat Sial, Zarqa Nawaz, Muhammad Naeem, Rana Zeeshan Habib, Thies Thiemann

Journal of Environmental Protection Vol.16 No.4, April 22, 2025

DOI: 10.4236/jep.2025.164018 127 Downloads 843 Views Citations
Comparative Study of the Adhesion of Reinforcements in Polymer Concrete and Cementitious Concrete (Articles)

Mathioro Fall, Ali Fatim Touré, Codou Badiane Ngom, Yaye Fatou Mansaly, Birane Niane

Materials Sciences and Applications Vol.16 No.10, October 21, 2025

DOI: 10.4236/msa.2025.1610029 64 Downloads 376 Views Citations
Loop Ileostomy and Colostomy—A Comparison between Supporting Plastic Rods and Epicutaneous or Subcutaneous Silicon Drains (Articles)

Mike Ralf Langenbach, Stefan Sauerland, Eiyad Issa, Claudia Nitschke, Hubert Zirngibl

Surgical Science Vol.2 No.5, July 29, 2011

DOI: 10.4236/ss.2011.25056 7,715 Downloads 13,358 Views Citations
Patients Body Modeling: A Practical Theoretical Experience in Plastic Surgery (Articles)

José Humberto Cardoso Resende, Issacar de Oliveira Costa, Pedro Fernando Huertas Granobles, Rolando Arturo Romero Balcazar, Guilherme Bahia de Carvalho, Hugo Rojas Perdomo, Edmar Moreira Lisbôa, Mohamad Youssef Mohsen, Álváro Sanchez Vargas, Nébia Maria Almeida de Figueiredo

Modern Plastic Surgery Vol.9 No.3, July 31, 2019

DOI: 10.4236/mps.2019.93007 1,224 Downloads 2,644 Views Citations
Leaching of Lead, Chromium and Copper into Drinks Placed in Plastic Cups at Different Conditions (Articles)

Oliver Ahimbisibwe, Denis Byamugisha, Paul Mukasa, Timothy Omara, Emmanuel Ntambi

American Journal of Analytical Chemistry Vol.13 No.2, February 16, 2022

DOI: 10.4236/ajac.2022.132002 369 Downloads 2,766 Views Citations
An Assessment of the Accretion Rate of Pollutants, Chemical Risk and Pollution Load Index on Microplastics in the Coastal Waters of Limbe-Idenau, Cameroon: Using Gravimetric Analysis (Articles)

Eric Ndumbe Esongami, Veronica Ebot Manga, Josepha Tendo Foba, Eric Fongoh Ngwa

Journal of Geoscience and Environment Protection Vol.13 No.5, May 30, 2025

DOI: 10.4236/gep.2025.135017 95 Downloads 539 Views Citations
Isotropic Elastoplasticity Fully Coupled with Non-Local Damage (Articles)

M. Almansba, K. Saanouni, N. E. Hannachi

Engineering Vol.2 No.6, July 1, 2010

DOI: 10.4236/eng.2010.26055 6,152 Downloads 11,115 Views Citations
Effect of Slow Cooling in Reducing Pore Size in a Sintered Powder Metallurgical 6061Aluminium Alloy (Articles)

S. Solay Anand, B. Mohan, T. R. Parthasarathy

Materials Sciences and Applications Vol.2 No.7, July 29, 2011

DOI: 10.4236/msa.2011.27117 6,249 Downloads 11,287 Views Citations
Effect of Precipitation Hardening on Hardness and Microstructure of Austenitic Manganese Steel (Articles)

S. Aribo, K.K. Alaneme, D.O. Folorunso, F.O. Aramide

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.2, February 20, 2010

DOI: 10.4236/jmmce.2010.92014 7,881 Downloads 11,355 Views Citations
The Effect of Time, Percent of Copper and Nickel on the Natural Precipitation Hardness of Al – Cu – Ni Powder Metallurgy Alloys Using Design of Experiments (Articles)

Mohammad M. Hamasha, Ahmad T. Mayyas, Mohammed T. Hayajneh, Adel M. Hassan

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.6, May 10, 2011

DOI: 10.4236/jmmce.2011.106036 5,889 Downloads 7,938 Views Citations

First <...345 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies