Finite Element Analysis FEM - Articles - Scientific Research Publishing

Predicting the Volume Fraction of Martensite in Welded Mild Steel Joint Reinforced with Titanium Alloy Powder (Articles)

Alain Ngenzi, Stephen A. Akinlabi, Anthony K. Muchiri

Modeling and Numerical Simulation of Material Science Vol.13 No.2, April 30, 2023

DOI: 10.4236/mnsms.2023.132002 195 Downloads 855 Views Citations
Simulating the Stress-Strain Response of Building under Oscillating Wind Conditions (Articles)

Miao Liu, Zijie Qu

Open Journal of Civil Engineering Vol.13 No.3, September 6, 2023

DOI: 10.4236/ojce.2023.133033 230 Downloads 846 Views Citations
Non-Pneumatic Tire Design and Modeling: An Overview of Research (Articles)

Charanpreet Singh Sidhu, Zeinab El-Sayegh

Journal of Applied Mathematics and Physics Vol.11 No.11, November 23, 2023

DOI: 10.4236/jamp.2023.1111224 852 Downloads 3,589 Views Citations
Stresses in the Scapular Fossa Do Not Exceed the Yield Stress When Elevated up to 135 Degrees of Abduction after Reverse Shoulder Arthroplasty (Articles)

Rina Sakai, Tomonori Kenmoku, Ryo Tazawa, Kazuhiro Yoshida, Tomomi Mizuhashi, Masanobu Ujihira

Journal of Biomedical Science and Engineering Vol.17 No.2, February 7, 2024

DOI: 10.4236/jbise.2024.172003 270 Downloads 915 Views Citations
The Finite Element Analysis of Optimal Orthodontic Force for Canine Distalization with Long-Arm Brackets (Articles)

Zhidan Zhu, Xiaojing Sun, Bin Lu, Qijie Shi, Yun Tang, Siyu Zou, Qian Jiang

Journal of Biosciences and Medicines Vol.13 No.1, January 21, 2025

DOI: 10.4236/jbm.2025.131016 134 Downloads 799 Views Citations
Research on the Forming Process of Large-Diameter and Thin-Walled Shells Made of Titanium Alloy (Articles)

Li Wang, Yanhao Wang, Zhongfeng Zhou, Geni Li, Tian Wang, Longxin Meng, Zhuo Cui, Kun He

World Journal of Engineering and Technology Vol.13 No.4, September 4, 2025

DOI: 10.4236/wjet.2025.134047 75 Downloads 439 Views Citations
A Short Review on the Modern Teaching of Electrical Machines Using MATLAB and Finite Elements (Articles)

Antônio Flavio Licarião Nogueira, Rafael Kingeski

Journal of Electromagnetic Analysis and Applications Vol.17 No.4, April 30, 2025

DOI: 10.4236/jemaa.2025.174004 64 Downloads 354 Views Citations
Finite Element Modeling and Validation of Submerged Arc Welding for Repairing 136RE Heavy Rails (Articles)

Arman Ali Mohammadi, Zhiyong Wang, Hualiang Teng

Journal of Transportation Technologies Vol.16 No.1, December 22, 2025

DOI: 10.4236/jtts.2026.161005 44 Downloads 285 Views Citations
Simplified Full Dynamic Analysis of a Railway Tunnel in Ethiopia (Articles)

Henok Fikre Gebregziabher, Tequamework Assefa

World Journal of Engineering and Technology Vol.9 No.3, July 27, 2021

DOI: 10.4236/wjet.2021.93030 339 Downloads 1,837 Views Citations
The Performance of Small Diameter Aluminum Light Support Structures Containing Handholes under Cyclic Fatigue (Articles)

Cameron R. Rusnak, Aya Al-Hamami, Craig C. Menzemer

Open Journal of Civil Engineering Vol.14 No.2, June 28, 2024

DOI: 10.4236/ojce.2024.142010 114 Downloads 548 Views Citations
Finite Element Analysis of the Material’s Area Affected during a Micro Thermal Analysis Applied to Homogeneous Materials (Articles)

Yoann Joliff, Lénaïk Belec, Jean-François Chailan

Journal of Surface Engineered Materials and Advanced Technology Vol.1 No.1, March 17, 2011

DOI: 10.4236/jsemat.2011.11001 6,137 Downloads 12,166 Views Citations
Extensions to the Finite Element Technique for the Magneto-Thermal Analysis of Aged Oil Cooled-Insulated Power Transformers (Articles)

Jehan Shazly, Amr A. Adly

Journal of Electromagnetic Analysis and Applications Vol.4 No.4, April 24, 2012

DOI: 10.4236/jemaa.2012.44022 5,593 Downloads 9,187 Views Citations
Equivalent Rigidity at the Minor Axis of Concrete Hollow Slab Based on Continuity Analysis (Articles)

Ronglan Zhang

Engineering Vol.7 No.9, September 21, 2015

DOI: 10.4236/eng.2015.79050 2,308 Downloads 3,288 Views Citations
A New Volumetric Parameter for a Comparative Finite-Element Analysis of a Six- or Four-Implant Mandibular Total-Arch Rehabilitation (Articles)

Alfredo Natali, Enrico Bertocchi, Andrea Baldini, Giuseppe Antonio Mulas, Matteo Martinolli, Bortolini Sergio

Open Journal of Stomatology Vol.6 No.1, January 19, 2016

DOI: 10.4236/ojst.2016.61002 4,136 Downloads 5,230 Views Citations
Use of Nonlinear Finite Element Analysis of Bone Density to Investigate the Biomechanical Effect in the Bone around Intervertebral Cages in Posterior Lumbar Interbody Fusion (Articles)

Tatsuya Sato, Ikuho Yonezawa, Mitsugu Todo, Hiromitsu Takano, Kazuo Kaneko

Journal of Biomedical Science and Engineering Vol.10 No.10, October 20, 2017

DOI: 10.4236/jbise.2017.1010034 1,383 Downloads 3,538 Views Citations
Determination of Optimum Slope Design for Northern Boxcut in Zone 5 Khoemacau Copper Mine, Botswana (Articles)

Maipelo Gaopatwe, Tefo Kgopana, Bame Molebatsi, Rahul Verma

Open Journal of Geology Vol.11 No.2, February 22, 2021

DOI: 10.4236/ojg.2021.112003 786 Downloads 2,524 Views Citations
Mechanical Design of Long-Term Body-Adhered Medical Devices to Maximize On-Body Survival (Articles)

Brian Ferry, John Abraham

Journal of Biomedical Science and Engineering Vol.14 No.9, September 30, 2021

DOI: 10.4236/jbise.2021.149028 294 Downloads 1,262 Views Citations
Pitting Corrosion as a Failure Mechanism in Aircraft Panels: A Modelling and Simulation Approach (Articles)

Krishna Lok Singh

Advances in Aerospace Science and Technology Vol.10 No.2, June 30, 2025

DOI: 10.4236/aast.2025.102005 143 Downloads 738 Views Citations
FE Dynamic Analysis Using Moving Support Element on Multi-Span Beams Subjected to Support Motions (Articles)

Yong-Woo Kim, Seoung Yeal Lee

Modern Mechanical Engineering Vol.5 No.4, November 11, 2015

DOI: 10.4236/mme.2015.54011 4,184 Downloads 5,546 Views Citations
Three-Dimensional Thermo-Elastic-Plastic Finite Element Method Modeling for Predicting Weld-Induced Residual Stresses and Distortions in Steel Stiffened-Plate Structures (Articles)

Myung Su Yi, Chung Min Hyun, Jeom Kee Paik

World Journal of Engineering and Technology Vol.6 No.1, February 27, 2018

DOI: 10.4236/wjet.2018.61010 1,929 Downloads 5,130 Views Citations
This article belongs to the Special Issue on Welding Technology

First <...345 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies