Wear Resistance - Articles - Scientific Research Publishing

Investigation of Element Profiles, Defects, Phase Composition and Physical and Mechanical Properties of Superhard Coatings Ti-Hf-Si-N (Articles)

Alexander D. Pogrebnjak

Materials Sciences and Applications Vol.4 No.4A, April 29, 2013

DOI: 10.4236/msa.2013.44A004 3,378 Downloads 6,545 Views Citations
This article belongs to the Special Issue on Nanocomposite
Comparative Study of the Impact of Corundum Particle Contaminants Size on Wear and Fatigue Life of Grease Lubricated Ball Bearings (Articles)

D. Koulocheris, A. Stathis, Th. Costopoulos, G. Gyparakis

Modern Mechanical Engineering Vol.3 No.4, November 5, 2013

DOI: 10.4236/mme.2013.34023 9,781 Downloads 29,648 Views Citations
Bismuth Effect on the Mechanical Properties of Antifriction Al-Sn Alloys (Articles)

Isai Rosales, Gonzalo Gonzalez-Rodriguez, Jose Luis Gama, Rene Guardian

Materials Sciences and Applications Vol.5 No.5, April 30, 2014

DOI: 10.4236/msa.2014.55038 5,088 Downloads 6,873 Views Citations
A Study of Porosity Effect on Tribological Behavior of Cast Al A380M and Sintered Al 6061 Alloys (Articles)

Avijit Sinha, Zoheir Farhat

Journal of Surface Engineered Materials and Advanced Technology Vol.5 No.1, December 26, 2014

DOI: 10.4236/jsemat.2015.51001 6,037 Downloads 8,063 Views Citations
This article belongs to the Special Issue on Surface and Interface of Materials
Erosion Behavior of AISI 6061-T6 (Articles)

Juan Rodrigo Laguna-Camacho, Hermilo Martínez-García, Frumencio Escamilla-Rodríguez, Carlos Alarcón-Rosas, Celia María Calderón-Ramón, Lizeth Ríos-Velasco, Lizeth Ríos-Velasco, Matilde Pelcastre-Lozano, Álvaro Casados-Sánchez, Melesio González-Gómez

Journal of Surface Engineered Materials and Advanced Technology Vol.5 No.3, June 15, 2015

DOI: 10.4236/jsemat.2015.53015 5,362 Downloads 6,968 Views Citations
Effect of Surface Porosity on Tribological Properties of Sintered Pure Al and Al 6061 (Articles)

Avijit Sinha, Zoheir Farhat

Materials Sciences and Applications Vol.6 No.6, June 24, 2015

DOI: 10.4236/msa.2015.66059 5,471 Downloads 7,992 Views Citations
Dry Sliding Wear Behavior of Ti6Al4V and TaN against TiN Deposited Steel Surface (Articles)

A. Elaya Perumal, I. Saravanan

Journal of Materials Science and Chemical Engineering Vol.3 No.7, July 16, 2015

DOI: 10.4236/msce.2015.37027 3,425 Downloads 4,715 Views Citations
Study of the Wear and Corrosion Performance of Hard Coatings Applied by Different Processes on Low Carbon Steel (Articles)

Carlos Roberto Camello Lima, Rodolfo Libardi, Flávio Camargo, Miguel Angel Reyes Mojena, Hipólito Domingo Carvajal Fals, Valtair Antonio Ferraresi

Materials Sciences and Applications Vol.7 No.7, July 26, 2016

DOI: 10.4236/msa.2016.77032 2,074 Downloads 3,914 Views Citations
This article belongs to the Special Issue on Functional Coatings and Its Application
Analysis of the Tool Condition Monitoring System Using Fuzzy Logic and Signal Processing (Articles)

Chidambaram Ramesh Kannan, Palani Padmanabhan

Circuits and Systems Vol.7 No.9, July 28, 2016

DOI: 10.4236/cs.2016.79232 1,778 Downloads 3,110 Views Citations
Metallurgical Analysis of Brake Blocks (Articles)

Mathioro Fall, Fadel Niang, Olivier Hubert, Mamadou Babacar Ndiaye

Open Journal of Metal Vol.7 No.1, March 29, 2017

DOI: 10.4236/ojmetal.2017.71001 1,636 Downloads 3,170 Views Citations
Improvement of Sliding Performance for Ball on Disc Tribo-Partners Using Graphite Like Carbon Solid Lubricant Coating (Articles)

Xiaobin Wen, Huantao Yao, Shicai Yang

Materials Sciences and Applications Vol.9 No.1, January 29, 2018

DOI: 10.4236/msa.2018.91013 1,332 Downloads 2,778 Views Citations
Artificial Enamel Wear after Prolonged Chewing Simulation against Monolithic Y-TZP Crowns (Articles)

Deborah Vedana, Leonardo Vedana, Emerson Alves Martins, Peter Brodersen, Grace M. De Souza

Materials Sciences and Applications Vol.9 No.4, April 18, 2018

DOI: 10.4236/msa.2018.94026 1,300 Downloads 2,898 Views Citations
This article belongs to the Special Issue on Material Fatigue and Fracture
Analysis of Steady Wear State of the Drum Brake (Articles)

István Páczelt, Attila Baksa, Zenon Mróz

Open Access Library Journal Vol.7 No.6, June 22, 2020

DOI: 10.4236/oalib.1106432 729 Downloads 2,413 Views Citations
Appraisal of Surface Modified AISI 316 L Stainless Steels by Plasma and Solid Nitriding Techniques (Articles)

R. Guardian, I. Rosales-Cadena, J. L. Valle-Mata, J. Pereyra-Hernández, O. Ocampo

Materials Sciences and Applications Vol.11 No.7, July 17, 2020

DOI: 10.4236/msa.2020.117032 734 Downloads 2,124 Views Citations
Prediction of Wearing of Cutting Tools Using Real Time Machining Parameters and Temperature Using Rayleigh-Ham Method (Articles)

Jean Nyatte Nyatte, Fabrice Alban Epee, Wilba Christophe Kikmo, Samuel Batambock, Claude Valéry Ngayihi Abbe, Robert Nzengwa

Modern Mechanical Engineering Vol.13 No.2, May 31, 2023

DOI: 10.4236/mme.2023.132003 324 Downloads 1,116 Views Citations
Synthesis and Characterization of Cu-Co-Mn Alloys for Aeronautic Applications: Microstructural and Mechanical Performance (Articles)

Rene Guardia-Tapia, Juan Antonio Ruiz-Ochoa, Isai Rosales-Cadena

Materials Sciences and Applications Vol.17 No.4, April 2, 2026

DOI: 10.4236/msa.2026.174007 31 Downloads 236 Views Citations
Investigation on Two-Body Abrasive Wear Behavior of Silicon Carbide Filled Glass Fabric-Epoxy Composites (Articles)

N. Mohan, S. Natarajan, S.P. KumareshBabu, Siddaramaiah

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.3, March 20, 2010

DOI: 10.4236/jmmce.2010.93019 6,153 Downloads 8,671 Views Citations
Improvement in Tribological Properties of Surface Layer of an Al Alloy by Friction Stir Processing (Articles)

Soheyl Soleymani, Amir Abdollah-zadeh, Sima Ahamd Alidokht

Journal of Surface Engineered Materials and Advanced Technology Vol.1 No.3, October 18, 2011

DOI: 10.4236/jsemat.2011.13014 6,717 Downloads 12,043 Views Citations
Microstructure and Properties of Fe-Based Coating on Column Surface Formed by High Frequency Induction Cladding (Articles)

Huilong Yang, Yufu Sun, Jingjie Shen, Sumeng Hu, Qing Zhao, Xiangcai Jia, Jingchao Zhang

Journal of Surface Engineered Materials and Advanced Technology Vol.2 No.1, January 12, 2012

DOI: 10.4236/jsemat.2012.21007 3,986 Downloads 7,942 Views Citations
Tool Wear Classification Using Fuzzy Logic for Machining of Al/SiC Composite Material (Articles)

V. Kalaichelvi, R. Karthikeyan, D. Sivakumar, V. Srinivasan

Modeling and Numerical Simulation of Material Science Vol.2 No.2, April 16, 2012

DOI: 10.4236/mnsms.2012.22003 5,987 Downloads 13,493 Views Citations

First <...345 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies