Physical Indentation Hardness - Articles - Scientific Research Publishing

Appraisal of Surface Modified AISI 316 L Stainless Steels by Plasma and Solid Nitriding Techniques (Articles)

R. Guardian, I. Rosales-Cadena, J. L. Valle-Mata, J. Pereyra-Hernández, O. Ocampo

Materials Sciences and Applications Vol.11 No.7, July 17, 2020

DOI: 10.4236/msa.2020.117032 782 Downloads 2,216 Views Citations
The Impact of Filler Content on Mechanical and Micro-Structural Characterization of Graphite-Epoxy Composites (Articles)

Abdullah Shalwan, Fahad Mohammad Alajmi, Naser Alajmi

Journal of Materials Science and Chemical Engineering Vol.10 No.6, June 21, 2022

DOI: 10.4236/msce.2022.106003 343 Downloads 1,543 Views Citations
Property Comparison of Golden Adornments with Different Characteristics Based on XRD (Articles)

Yijie Zhu, Danjing Hu, Qianyun Lu, Xuejun Yan, Qiujin Peng, Xu Zhang

Open Access Library Journal Vol.10 No.3, March 17, 2023

DOI: 10.4236/oalib.1109874 84 Downloads 888 Views Citations
Metallurgical Microstructure Complexity in the Electron Beam Welding (EBW) Joint of Ti6246 (Articles)

Daniel Moreno, Yohanan Nachmana, Roei Saraga, Tal Rokah, Denis Panchenco, Michael Mansano, Elinor Itzhaky, Moshe Shapira

Journal of Minerals and Materials Characterization and Engineering Vol.12 No.2, March 29, 2024

DOI: 10.4236/jmmce.2024.122008 297 Downloads 857 Views Citations
Effect of Al on Zn and Mg on Zn-Al as Pb Free Solder Alloy (Articles)

Safayet Rafid, Suraya Sabrin Soshi, Al Fahad Ahmed, Md. Abdul Gafur

Materials Sciences and Applications Vol.16 No.5, May 27, 2025

DOI: 10.4236/msa.2025.165015 112 Downloads 666 Views Citations
Synthesis and Characterization of Cu-Co-Mn Alloys for Aeronautic Applications: Microstructural and Mechanical Performance (Articles)

Rene Guardia-Tapia, Juan Antonio Ruiz-Ochoa, Isai Rosales-Cadena

Materials Sciences and Applications Vol.17 No.4, April 2, 2026

DOI: 10.4236/msa.2026.174007 58 Downloads 305 Views Citations
Application of Automated Ball Indentation for Property Measurement of Degraded Zr2.5Nb (Articles)

Kamal Sharma, P.K. Singh, Vivek Bhasin, K.K. Vaze

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.7, June 6, 2011

DOI: 10.4236/jmmce.2011.107051 6,679 Downloads 8,547 Views Citations
Evaluation of Residual Stresses Induced by High Speed Milling Using an Indentation Method (Articles)

Felipe Díaz, Claudio Mammana, Armando Guidobono

Modern Mechanical Engineering Vol.2 No.4, November 30, 2012

DOI: 10.4236/mme.2012.24019 6,871 Downloads 12,037 Views Citations
Mechanical Property Estimation of Similar Weld using Ball Indentation Technique (Articles)

Harshit Kumar Khandelwal, Kamal Sharma, Rahul Chhibber

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.11, November 30, 2012

DOI: 10.4236/jmmce.2012.1111116 5,655 Downloads 7,805 Views Citations
Numerical Crack Analysis of Blunt Rock Indenters by an Indirect Boundary Element Method (Articles)

Narges Sadat Tayarani, Mohammad Fatehi Marji

Geomaterials Vol.3 No.4, October 14, 2013

DOI: 10.4236/gm.2013.34017 4,298 Downloads 6,996 Views Citations
Effects of Syngas Particulate Fly Ash Deposition on the Mechanical Properties of Thermal Barrier Coatings on Simulated Film-Cooled Turbine Vane Components (Articles)

Kevin Luo, Andrew C. Nix, Bruce S. Kang, Dumbi A. Otunyo

International Journal of Clean Coal and Energy Vol.3 No.4, November 26, 2014

DOI: 10.4236/ijcce.2014.34006 4,457 Downloads 5,835 Views Citations
A Study of Structure, Thermal and Mechanical Properties of Free Machining Al-Zn-Sn-Bi Alloys Rapidly Solidified from Molten State (Articles)

Nermin Ali Abdelhakim, Rizk Mostafa Shalaby, Mustafa Kamal

World Journal of Engineering and Technology Vol.6 No.3, August 1, 2018

DOI: 10.4236/wjet.2018.63040 972 Downloads 2,554 Views Citations
The Non-Equivalence of Pyramids and Their Pseudo-Cones: Important New Insights (Articles)

Gerd Kaupp

Journal of Applied Mathematics and Physics Vol.10 No.4, April 14, 2022

DOI: 10.4236/jamp.2022.104081 224 Downloads 906 Views Citations
Mechanical Properties Measurement of Sickle Cell (SS) Red Blood Cells Using Optical Tweezers (Articles)

Pavel Yale, Abade Ange-Boris N’guessan, Jean Michel Edoukoua Konin, Michel Abaka Kouacou, Jérémie Thouakesseh Zoueu

Advances in Nanoparticles Vol.14 No.4, November 21, 2025

DOI: 10.4236/anp.2025.144012 84 Downloads 463 Views Citations
Anisotropy on Mechanical Properties of CMSX-6 Ni-Base Superalloy Single Crystal Using Profilometer Indentation Plastometer (PIP) and Small Punch Test (SPT) (Articles)

Daniel Moreno, Amit Yair, Libi Shechner, Yohanan Nahmana, Ariel Yehuda Cohen, Moshe Shapira

Journal of Minerals and Materials Characterization and Engineering Vol.14 No.1, January 21, 2026

DOI: 10.4236/jmmce.2026.141002 81 Downloads 386 Views Citations
Quantitative Determination of Material Hardness (Articles)

Zdzislaw Pluta, Tadeusz Hryniewicz

Journal of Quantum Information Science Vol.1 No.3, December 9, 2011

DOI: 10.4236/jqis.2011.13018 4,607 Downloads 10,303 Views Citations
Study of Mechanical and Physical Properties of Palm Fiber Reinforced Acrylonitrile Butadiene Styrene Composite (Articles)

Budrun Neher, Md. Mahbubur Rahman Bhuiyan, Humayun Kabir, Md. Rakibul Qadir, Md. Abdul Gafur, Farid Ahmed

Materials Sciences and Applications Vol.5 No.1, January 27, 2014

DOI: 10.4236/msa.2014.51006 8,882 Downloads 14,419 Views Citations
Measuring Whitespace Pattern Sequences as an Indication of Plagiarism (Articles)

Nikolaus Baer, Robert Zeidman

Journal of Software Engineering and Applications Vol.5 No.4, April 23, 2012

DOI: 10.4236/jsea.2012.54029 3,864 Downloads 6,982 Views Citations
Indentation onto Stishovite (SiO₂), MgO, and a Covered Superalloy: “Pop-In” Repair, Phase-Transition Onsets, Polymorph Energies, and Transition-Energies (Articles)

Gerd Kaupp

Advances in Materials Physics and Chemistry Vol.10 No.3, March 27, 2020

DOI: 10.4236/ampc.2020.103007 689 Downloads 1,714 Views Citations
Corrosion effect on the flexural strength & micro-hardness of ips e-max ceramics (Articles)

Cherif Mohsen

Open Journal of Stomatology Vol.1 No.2, July 1, 2011

DOI: 10.4236/ojst.2011.12006 7,836 Downloads 14,048 Views Citations

First <...345 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies