Hyaluronic Acid HA Filler - Articles - Scientific Research Publishing

The Effects of Filler Contents and Particle Sizes on the Mechanical and End-Use Properties of Snail Shell Powder Filled Polypropylene (Articles)

Genevive C. Onuegbu, Isaac O. Igwe

Materials Sciences and Applications Vol.2 No.7, July 29, 2011

DOI: 10.4236/msa.2011.27110 13,051 Downloads 21,551 Views Citations
Effect of Geometry of Filler Particles on the Effective Thermal Conductivity of Two-Phase Systems (Articles)

Deepti Chauhan, Nilima Singhvi, Ramvir Singh

International Journal of Modern Nonlinear Theory and Application Vol.1 No.2, June 28, 2012

DOI: 10.4236/ijmnta.2012.12005 7,222 Downloads 16,571 Views Citations
Zr-Ti-Ni-Cu Amorphous Brazing Fillers Applied to Brazing Titanium TA2 and Q235 Steel (Articles)

Jie Cui, Qiuya Zhai, Jinfeng Xu, Yahui Wang, Jianlin Ye

Materials Sciences and Applications Vol.5 No.11, September 29, 2014

DOI: 10.4236/msa.2014.511082 3,748 Downloads 5,235 Views Citations
Adding Sn on the Performance of Amorphous Brazing Fillers Applied to Brazing TA2 and Q235 (Articles)

Jie Cui, Qiuya Zhai, Jinfeng Xu, Yahui Wang, Jianlin Ye

Journal of Surface Engineered Materials and Advanced Technology Vol.4 No.6, October 8, 2014

DOI: 10.4236/jsemat.2014.46038 3,783 Downloads 4,826 Views Citations
This article belongs to the Special Issue on Surface and Interface of Materials
Influence of Nano-Barium Sulfate Agglomeration on Microstructure and Properties of the Hardened Cement-Based Materials (Articles)

Mohamed El-Shahate Ismaiel Saraya, Inas Mostafa Bakr

Journal of Materials Science and Chemical Engineering Vol.3 No.11, November 27, 2015

DOI: 10.4236/msce.2015.311009 3,341 Downloads 4,863 Views Citations
Adherence of Streptococcus mutans and Adsorption of Salivary Protein to Resin Composites Containing S-PRG Fillers (Articles)

Masato Hotta, Daisuke Tamura, Hirotomo Kotake, Shusuke Kusakabe, Taiyu Gen, Kazuki Oike

Open Journal of Stomatology Vol.7 No.3, March 13, 2017

DOI: 10.4236/ojst.2017.73011 1,502 Downloads 2,667 Views Citations
Study of the Mechanical Behaviour of Mortars Modified with Rice Husk Ash (Articles)

Issiaka Sanou, Moustapha Sawadogo, Mohamed Seynou, Lamine Zerbo, Raguilnaba Ouedraogo

Journal of Minerals and Materials Characterization and Engineering Vol.7 No.6, October 21, 2019

DOI: 10.4236/jmmce.2019.76025 814 Downloads 2,792 Views Citations
Elaboration and Characterization of a Composite Material Based on Canarium schweinfurthii Engl Cores with a Polyester Matrix (Articles)

Dieunedort Ndapeu, Francis Tamwo, Morino Bernard Nganou Koungang, Ghislain Tchuen, Nicodème R. Sikame Tagne, Sophie Bistac, Ebénezer Njeugna

Materials Sciences and Applications Vol.11 No.3, March 19, 2020

DOI: 10.4236/msa.2020.113014 829 Downloads 1,889 Views Citations
Determination of Levels of Asbestos Fiber in Cosmetic and Non-Cosmetic Products Sold within Enugu Metropolis—Enugu State, Nigeria (Articles)

Onyeka Okeke, Harold Chinedu Okeke, Ernest Ezeh, Charles Chukwubuikem Aniobi, Uchechi Rowland Imoh

Journal of Environmental Protection Vol.11 No.10, October 21, 2020

DOI: 10.4236/jep.2020.1110054 484 Downloads 1,821 Views Citations
Utilisation of Carbon Capture and Mineralisation Products: Considering Monohydrocalcite as a Potential Functional Filler (Articles)

Roneta Chaliulina

Open Access Library Journal Vol.9 No.12, December 27, 2022

DOI: 10.4236/oalib.1109436 99 Downloads 749 Views Citations
Valorisation of Industrial Waste for the Development of Fire Resistant Material to Be Used as Filler in Paints and Varnishes (Articles)

Konstantinos Miltiadis Sakkas, Christos Georgopoulos, Athanasios Kaforos, Themis Parousis

Open Access Library Journal Vol.10 No.11, November 24, 2023

DOI: 10.4236/oalib.1110773 85 Downloads 484 Views Citations
Development of EVA Foam Using Corn Pith as a Sustainable Filler (Articles)

Ranadheer Malyala, Jens Schuster, Rahul Kovuru, Shameem Akthar Shaik

Open Journal of Composite Materials Vol.15 No.4, October 9, 2025

DOI: 10.4236/ojcm.2025.154011 53 Downloads 597 Views Citations
Intraoperative Fracture of the Femur in Revision Total Hip Arthroplasty with a Fully HA-Coated Stem (Articles)

David E. Rothem, Lilah Rothem, Alexander Lerner, Tal Salamon, Richard Hiscock, Neil Bergman

Open Journal of Orthopedics Vol.4 No.3, March 21, 2014

DOI: 10.4236/ojo.2014.43012 4,140 Downloads 6,604 Views Citations
Possibility of Evolution in Culture of the Oryctes Nudivirus of the Coconut Rhinoceros Beetle Oryctes rhinoceros (Coleoptera: Scarabaeidae: Dynastinae) (Articles)

Geoffrey O. Bedford

Advances in Entomology Vol.6 No.1, January 25, 2018

DOI: 10.4236/ae.2018.61004 1,459 Downloads 3,635 Views Citations
The Effect of Material Surface Microstructure on the Enhancement of Bone-Bonding Ability of a Hydroxyapatite-Implant by Low-Intensity Pulsed Ultrasound (LIPUS) (Articles)

Masanori Kobayashi

Materials Sciences and Applications Vol.12 No.1, January 20, 2021

DOI: 10.4236/msa.2021.121003 589 Downloads 1,679 Views Citations
This article belongs to the Special Issue on Material Surface Engineering
Policies on Employment-Linked Vocational Training for Workers in Ha Tinh Province: Current Situtation and Solutions (Articles)

Quang Thang Dao

American Journal of Industrial and Business Management Vol.15 No.4, April 30, 2025

DOI: 10.4236/ajibm.2025.154031 93 Downloads 484 Views Citations
Applications of Nanotechnology in Reconstructive Surgery (Articles)

Timothy Varghese

Open Access Library Journal Vol.3 No.6, June 13, 2016

DOI: 10.4236/oalib.1102455 1,231 Downloads 3,467 Views Citations
Effects of Fillerwire Composition along with Different Pre- and Post-Heat Treatment on Mechanical Properties of AISI 4130 Welded by the GTAW Process (Articles)

Ali Emamian, Ardalan Emamian, Amir Hossein Kowkabi

Materials Sciences and Applications Vol.1 No.3, August 25, 2010

DOI: 10.4236/msa.2010.13022 9,015 Downloads 16,266 Views Citations
A Comparative Study of the Phase Distribution in Carbon-Silica Hybrid Fillers for Rubber Obtained by Different Methods (Articles)

Omar A. Al-Hartomy, Ahmed A. Al-Ghamdi, Said A. Farha Al-Said, Nikolay Dishovsky, Michael B. Ward, Petrunka Malinova, Mihail Mihaylov

Materials Sciences and Applications Vol.5 No.10, August 21, 2014

DOI: 10.4236/msa.2014.510070 3,859 Downloads 5,205 Views Citations
Evaluation of Filler Distribution in Particulate Reinforced Composites (Articles)

Kurganova Yuliya, Lopatina Yuliya, Yijin Chen

Journal of Materials Science and Chemical Engineering Vol.3 No.7, July 1, 2015

DOI: 10.4236/msce.2015.37014 3,085 Downloads 4,682 Views Citations

First <...345 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies