Friction; Wear; Polymer Composites; Nano-Particles - Articles

Nonlinear and Rate-Dependent Hysteretic Responses of Active Hybrid Composites (Articles)

Chien-Hong Lin, Anastasia Muliana

Materials Sciences and Applications Vol.7 No.1, January 29, 2016

DOI: 10.4236/msa.2016.71006 4,813 Downloads 6,384 Views Citations
CVD Coating of Oxide Particles for the Production of Novel Particle-Reinforced Iron-Based Metal Matrix Composites (Articles)

Sebastian Brust, Arne Röttger, Werner Theisen

Open Journal of Applied Sciences Vol.6 No.4, April 27, 2016

DOI: 10.4236/ojapps.2016.64026 2,843 Downloads 4,650 Views Citations
This article belongs to the Special Issue on Coating Science and Technology
Study on Water Resistance of Polydopamine Treatment Wood Flour/Polypropylene Composites (Articles)

Do Khoa Thi Lanh, Tran Duc Thien

Journal of Materials Science and Chemical Engineering Vol.4 No.5, May 26, 2016

DOI: 10.4236/msce.2016.45002 2,311 Downloads 3,640 Views Citations
Effect of Fiber Weight Ratio and Fiber Modification on Flexural Properties of Posidonia-Polyester Composites (Articles)

S. Zannen, L. Ghali, M. T. Halimi, M. Ben Hassen

Open Journal of Composite Materials Vol.6 No.3, July 1, 2016

DOI: 10.4236/ojcm.2016.63007 2,606 Downloads 4,675 Views Citations
Prediction of the Enhanced Out-of-Plane Thermal Conductivity of Carbon Fiber Composites Produced by VARTM (Articles)

Jens Schuster, Martin Schütz, Johannes Lutz, Laura Lempert

Open Journal of Composite Materials Vol.6 No.4, September 19, 2016

DOI: 10.4236/ojcm.2016.64010 2,010 Downloads 3,596 Views Citations
Fabrication, Microstructure, Thermal and Electrical Properties of Copper Heat Sink Composites (Articles)

Walid Daoush, Ahmed Swidan, Gamal Abd El-Aziz, Mohamed Abdelhalim

Materials Sciences and Applications Vol.7 No.9, September 26, 2016

DOI: 10.4236/msa.2016.79046 2,311 Downloads 5,379 Views Citations
Fiber Line Optimization in Single Ply for 3D Printed Composites (Articles)

Yusuke Yamanaka, Akira Todoroki, Masahito Ueda, Yoshiyasu Hirano, Ryosuke Matsuzaki

Open Journal of Composite Materials Vol.6 No.4, October 12, 2016

DOI: 10.4236/ojcm.2016.64012 3,855 Downloads 7,611 Views Citations
Common Type of Damages in Composites and Their Inspections (Articles)

Amin Ghobadi

World Journal of Mechanics Vol.7 No.2, February 22, 2017

DOI: 10.4236/wjm.2017.72003 6,367 Downloads 13,115 Views Citations
Effect of 3 mol% Yttria Stabilized Zirconia Addition on Structural and Mechanical Properties of Alumina-Zirconia Composites (Articles)

M. A. Gafur, Md. Saifur Rahman Sarker, Md. Zahangir Alam, M. R. Qadir

Materials Sciences and Applications Vol.8 No.7, July 24, 2017

DOI: 10.4236/msa.2017.87041 1,794 Downloads 5,129 Views Citations
Improvement of Bending Strength of Carbon Fiber/Thermoplastic Epoxy Composites
—Effects of Molecular Weight of Epoxy on Carbon Fiber/Matrix Interfacial Strength and Connection of Cracks in Matrix (Articles)

Hironori Nishida, Kazuya Okubo, Toru Fujii, Valter Carvelli

Open Journal of Composite Materials Vol.7 No.4, July 27, 2017

DOI: 10.4236/ojcm.2017.74014 1,409 Downloads 3,495 Views Citations
This article belongs to the Special Issue on Composite Interface and Damages
The Determination of Interfacial Shear Strength in Short Fiber Reinforced Poly Ethylene Terephthalate by Kelly-Tyson Theory (Articles)

Wiranphat Thodsaratpreeyakul, Putinun Uawongsuwan, Akio Kataoka, Takanori Negoro, Hiroyuki Hamada

Open Journal of Composite Materials Vol.7 No.4, July 27, 2017

DOI: 10.4236/ojcm.2017.74015 2,472 Downloads 4,930 Views Citations
This article belongs to the Special Issue on Composite Interface and Damages
Analysis of Mechanical Behavior of Composite Tissues Using Vibrational Optical Coherence Tomography (Articles)

Frederick H. Silver, Ruchit G. Shah

World Journal of Mechanics Vol.7 No.10, October 20, 2017

DOI: 10.4236/wjm.2017.710022 1,280 Downloads 2,540 Views Citations
This article belongs to the Special Issue on Mechanics of Materials
Mechanochemically Metamorphosed Composites of Homogeneous Nanoscale Silicon and Silicate Oxides with Lithium and Metal Compounds (Articles)

Norihiro Shimoi, Masae Komatsu, Yasumitsu Tanaka, Kazuyuki Tohji

Materials Sciences and Applications Vol.9 No.1, January 18, 2018

DOI: 10.4236/msa.2018.91008 1,165 Downloads 2,441 Views Citations
This article belongs to the Special Issue on Electrolyte and Electrode Materials
Energy Absorption of Pultruded Glass-Graphite/Epoxy Hybrid Composites under High Strain-Rate Induced Transverse Tension (Articles)

Damian Stoddard, Suman Babu Ukyam, R. Mantena Prabhakar, Arunachalam Rajendran

Open Journal of Composite Materials Vol.8 No.2, April 13, 2018

DOI: 10.4236/ojcm.2018.82004 1,147 Downloads 2,558 Views Citations
Improvement of Interlaminar Fracture Properties of Out of Autoclave Manufactured Carbon Fiber Reinforced Polymers Using Multi-Walled Carbon Nanotubes (Articles)

Dimoka Polyxeni, Kostagiannakopoulou Christina, Masouras Athanasios, Kostopoulos Vassilis

World Journal of Mechanics Vol.9 No.6, May 29, 2019

DOI: 10.4236/wjm.2019.96010 1,128 Downloads 2,511 Views Citations
Nano Particles and Nano Composites for Preservation of Historic Marble Minbars with Application on the Minber of Soliman Pasha Al-Khadim Mosque in Salah El-Din Citadel in Cairo, Egypt (Articles)

Mohamed Abd El Hady, Sayed Hemada, Mahmoud Algohary

Open Journal of Geology Vol.9 No.13, December 19, 2019

DOI: 10.4236/ojg.2019.913099 846 Downloads 2,022 Views Citations
Evaluation on the Application of GLB Structures (Articles)

Guosong Yang, Kun Wang

Journal of Materials Science and Chemical Engineering Vol.8 No.5, May 25, 2020

DOI: 10.4236/msce.2020.85003 822 Downloads 2,486 Views Citations
Exploring the Potential to Uniquely Manufacture Curved VARTM Epoxy Composites Using Cost-Effective FDM Molds (Articles)

Syed Monis Raza Kazmi, Jens Schuster, Johannes Lutz

Open Journal of Composite Materials Vol.10 No.3, June 19, 2020

DOI: 10.4236/ojcm.2020.103004 948 Downloads 2,544 Views Citations
Oxidation Performance of Ytterbium Disilicate/Silicon Environmental Barrier Coating via Optimized Air Plasma Spraying (Articles)

Yingjie Jian, Yanfei Wang, Rongjun Liu, Fan Wan

Journal of Materials Science and Chemical Engineering Vol.9 No.4, April 13, 2021

DOI: 10.4236/msce.2021.94003 689 Downloads 1,821 Views Citations
A Mini-Review and Perspective on Current Best Practice and Emerging Industry 4.0 Methods for Risk Reduction in Advanced Composites Manufacturing (Articles)

Bryn Crawford, Hamid Khayyam, Abbas S. Milani

Open Journal of Composite Materials Vol.11 No.2, April 20, 2021

DOI: 10.4236/ojcm.2021.112004 1,077 Downloads 2,510 Views Citations

First <...343536 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies