Mechanical Damage - Articles - Scientific Research Publishing

Mechanical Characteristics Test of Concrete Steel Bars Available in Côte d’Ivoire (Articles)

Conand Honoré Kouakou, Ibrahima Bakayoko, Mamery Adama Serifou, Edjikémé Emeruwa

Journal of Materials Science and Chemical Engineering Vol.8 No.9, September 9, 2020

DOI: 10.4236/msce.2020.89001 708 Downloads 2,857 Views Citations
Effect of Initial Microstructure on Phase Precipitation and Mechanical Properties during Heat Treatment of TC21 Titanium Alloy (Articles)

Liuru Wang, Xiangqian Song, Yue Zhang, Lian Zhou

Engineering Vol.12 No.10, October 28, 2020

DOI: 10.4236/eng.2020.1210055 876 Downloads 2,440 Views Citations
D’Alembert and the Wave Equation: Its Disputes and Controversies (Articles)

Agamenon R. E. Oliveira

Advances in Historical Studies Vol.9 No.4, November 30, 2020

DOI: 10.4236/ahs.2020.94019 1,354 Downloads 8,070 Views Citations
Influence of a Mineral Filler on the Fire Behaviour and Mechanical Properties of a Wood Waste Composite Material Stabilized with Expanded Polystyrene (Articles)

Koffi Clément Kouadio, Brahiman Traoré, Serge Pacome Kaho, Conand Honoré Kouakou, Edjikémé Emeruwa

Open Journal of Applied Sciences Vol.10 No.12, December 23, 2020

DOI: 10.4236/ojapps.2020.1012059 693 Downloads 1,950 Views Citations
Prospective Evaluation of Outcomes of Mechanical Devices in Women with Symptomatic Pelvic Organ Prolapse in Ogbomoso, South-Western Nigeria (Articles)

Akintunde Olusegun Fehintola, Olufemi Timothy Awotunde, Olumuyiwa Ayotunde Ogunlaja, Lawrence Olujire Olujide, Samuel Eniola Akinola, Sunday Adekunle Oladeji, Babatola Bakare, Olurotimi Idowu Aaron

Open Journal of Obstetrics and Gynecology Vol.11 No.4, April 27, 2021

DOI: 10.4236/ojog.2021.114044 670 Downloads 2,184 Views Citations
This article belongs to the Special Issue on Female Pelvic Medicine
Effect of the Substitution of Sand by Rubber of Waste Tires on the Mechanical Properties of Hydraulic Concrete and Exposure to Gamma Radiation (Articles)

Jesús M. Colín de la Cruz, Carmen Gabriela Guzmán, Fermín Castillo Mejía, Benjamin Leal Acevedo, Osvaldo Flores Cedillo, Isabel Gamboa de Buen, Arturo Molina Ocampo, Horacio Martínez Valencia

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.3, May 12, 2021

DOI: 10.4236/jmmce.2021.93017 588 Downloads 2,163 Views Citations
Investigation of the Effect of Grain Refinement on the Mechanical Properties of 6082 Aluminium Alloy (Articles)

Duygu Izcankurtaran, Bilgehan Tunca, Gökberk Karatay

Open Journal of Applied Sciences Vol.11 No.6, June 25, 2021

DOI: 10.4236/ojapps.2021.116051 789 Downloads 2,862 Views Citations
Coronal Alignment of Three Different Types of Implants in Kinematically Aligned Total Knee Arthroplasty: A Comparative Study (Articles)

Yoshinori Soda, Mitsuhiro Nakamura, Nobuo Adachi

Open Journal of Orthopedics Vol.11 No.6, June 28, 2021

DOI: 10.4236/ojo.2021.116018 576 Downloads 3,058 Views Citations
Mechanical Characterization and Micro-Wear of FeB-Fe₂B Layers on Boriding AISI D2 and AISI 4340 Steels (Articles)

Suellen Terroso de Mendonça Ferreira, André Luiz Klemes Bacco, Eduardo Mauro do Nascimento, Carlos Maurício Lepienski

Materials Sciences and Applications Vol.12 No.7, July 6, 2021

DOI: 10.4236/msa.2021.127022 490 Downloads 2,164 Views Citations
A Scientific Review on Various Pellet Extruders Used in 3D Printing FDM Processes (Articles)

Yousuf Pasha Shaik, Jens Schuster, Aarif Shaik

Open Access Library Journal Vol.8 No.8, July 29, 2021

DOI: 10.4236/oalib.1107698 1,457 Downloads 13,579 Views Citations
A Study on Computer Consciousness on Intuitive Geometry Based on Mathematics Experiments and Statistical Analysis (Articles)

Xiang Sun, Zhenbing Zeng

Advances in Pure Mathematics Vol.11 No.8, August 11, 2021

DOI: 10.4236/apm.2021.118045 388 Downloads 1,272 Views Citations
Microstructures and Mechanical Properties of Al-Zn-Sn Bearing Alloys for High Performance Applications (Articles)

Nermin Ali Abdelhakim, Rizk Mostafa Shalaby

World Journal of Engineering and Technology Vol.9 No.3, August 17, 2021

DOI: 10.4236/wjet.2021.93045 442 Downloads 2,336 Views Citations
Chemical Modification on Woven Jute and Nonwoven Wet-Laid Glass Fiber Sheet Reinforced Poly-(ε-Caprolactone) Composites (Articles)

Mohammad Muzammel Hossen, Mohammad Obaidur Rahman

Open Journal of Composite Materials Vol.11 No.4, September 1, 2021

DOI: 10.4236/ojcm.2021.114006 481 Downloads 2,371 Views Citations
Effects of the Solution Treatment on Microstructural Evolution, Mechanical Properties, and Fracture Mechanism of Nickel-Based GH4099 Superalloy (Articles)

Guangsheng Xu, Chuan Wu, Zhenhua Liu, Yilong Wang, Zhanying Zhang, Yun Li, Ping Hu

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.6, November 9, 2021

DOI: 10.4236/jmmce.2021.96037 665 Downloads 2,284 Views Citations
Structural Characterization of Bauxite Red Mud to Utilization in Ceramic Wall/Roofing Tile: Effect of Temperature on Mechanical Properties and Physic-Chemical Stability (Articles)

Ahmat Tom, Paul Nestor Djomou Djonga, Cornelius Tsamo, Hambate Gomdje Valery, Joshiane Azangueu, Sandrine Kamdoum Noukelag

Advances in Materials Physics and Chemistry Vol.12 No.1, January 31, 2022

DOI: 10.4236/ampc.2022.121001 420 Downloads 1,918 Views Citations
Experimental Study on the Effect of Volume Ratio of Steel Fiber on Mechanical Properties of Ceramsite Concrete (Articles)

Ziyi Guo

Open Access Library Journal Vol.9 No.4, April 8, 2022

DOI: 10.4236/oalib.1108571 161 Downloads 1,239 Views Citations
Ventilator Associated Pneumonia in an Intensive Care Unit (Articles)

Yadigar Yilmaz Camgoz, Ferda Yilmaz İnal, Öznur Şen

Open Journal of Respiratory Diseases Vol.12 No.2, April 15, 2022

DOI: 10.4236/ojrd.2022.122004 326 Downloads 2,126 Views Citations
Physico-Mechanical Properties of Bio-Based Bricks (Articles)

Valentin Makomra, Lionel Karga Tapsia, Benoit Ndiwe, Maxime Dawoua Kaoutoing, Noel Konai, Abel Njom, Tawe Laynde, Danwe Raidandi

Journal of Materials Science and Chemical Engineering Vol.10 No.4, April 28, 2022

DOI: 10.4236/msce.2022.104002 381 Downloads 1,760 Views Citations
Performance Analysis of the Flywheel Assembly Design Using SolidWorks Modeling and Simulation Capabilities (Articles)

Abdelbaki Abdallah, Seif Eddine Bendaoudi, Houcine Naim, Samir Habibi

Smart Grid and Renewable Energy Vol.13 No.5, May 31, 2022

DOI: 10.4236/sgre.2022.135007 349 Downloads 1,809 Views Citations
Development and Evaluation of the Mechanical Properties of Coconut Fibre Reinforced Low Density Polyethylene Composite (Articles)

Ahmed Mohammed Bukar, Abubakar Mohammed El-Jummah, Abba Alhaji Hammajam

Open Journal of Composite Materials Vol.12 No.3, June 17, 2022

DOI: 10.4236/ojcm.2022.123007 422 Downloads 2,605 Views Citations

First <...303132 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies