Bone Cutting Errors - Articles - Scientific Research Publishing

Experimental Results of the Fibrin Clot Use to Accelerate the Regeneration of Damaged Bone in the Rat Lower Jaw (Articles)

Igor Maiborodin, Andrey Shevela, Tatyana Perrin, Ivan Kolesnikov, Vera Matveeva, Alexander Shevela, Boris Sheplev, Irina Kolmakova

Surgical Science Vol.1 No.1, July 30, 2010

DOI: 10.4236/ss.2010.11001 4,978 Downloads 9,077 Views Citations
Effects of low intensity pulsed ultrasound stimulation on bone regeneration in rat parietal bone defect model (Articles)

Kang Chen, Jia Hao, Kanako Noritake, Yu Yamashita, Shinji Kuroda, Shohei Kasugai

Open Journal of Regenerative Medicine Vol.2 No.1, March 29, 2013

DOI: 10.4236/ojrm.2013.21002 4,860 Downloads 11,077 Views Citations
Profile of Secondary Bone Cancer in Brazzaville (Articles)

Honoré Ntsiba, Norbert Edgard Lamini N’soundhat, Eliane Ndounga, Akoli Ekoya Ondzala

Open Journal of Rheumatology and Autoimmune Diseases Vol.3 No.4, November 19, 2013

DOI: 10.4236/ojra.2013.34039 3,361 Downloads 5,348 Views Citations
Solid Aneurysmal Bone Cyst of the Distal Metatarsus in a Horse (Articles)

Nadja Herbach, Christina Terboven, Peter Lambrecht

Open Journal of Pathology Vol.6 No.2, April 18, 2016

DOI: 10.4236/ojpathology.2016.62011 2,962 Downloads 5,624 Views Citations
Autotransplantation of Teeth and the Reconstruction of Alveolar Bone Defects Using Artificial Bone: A Case Series (Articles)

Zhifang Chen, Wei Chen

Open Journal of Stomatology Vol.9 No.12, December 3, 2019

DOI: 10.4236/ojst.2019.912028 898 Downloads 2,529 Views Citations
Etiologies of Bone Metastases at the Rheumatology Department (UTH) of Abidjan (Articles)

Mariam Gbané, Jean Claude Soglo, Mohamed Diomandé, Guy Léopold Kengni, Baly Ouattara, Jean Mermoz Djaha Kouassi, You Nina Carmelle Kpami, Yaya Coulibaly, Edmond Eti

Open Journal of Rheumatology and Autoimmune Diseases Vol.10 No.1, December 6, 2019

DOI: 10.4236/ojra.2020.101001 671 Downloads 1,693 Views Citations
Contribution of Scintigraphy in the Assessment of Extension of Osteophilic Cancers in Senegal from 2018 to 2021 (Articles)

Olatoundé Herbert Fachinan, El Hadji Lamine Bathily, Mamadou Salif Djigo, Gilles David Houndétoungan, Djibrillou Moussa Issoufou, Boucar Ndong, Kuassi Marcellin Amoussou-Guénou, Mamadou Mbodj

Open Journal of Biophysics Vol.13 No.1, November 4, 2022

DOI: 10.4236/ojbiphy.2023.131001 424 Downloads 1,298 Views Citations
Contribution of Bone Scintigraphy in the Metastatic Extension Assessment of Prostate Cancer: A Study of 288 Cases in the Nuclear Medicine Department of Idrissa Pouye General Hospital, Dakar (Articles)

El Hadji Amadou Lamine Bathily, Ousseynou Diop, Mamoudou Salif Djigo, Gora Thiaw, Kalidou Gueye, Mohamed Chekhma, Olatounde Herbert Fachinan, Boucar Ndong, Omar Ndoye, Mamadou Mbodj

Open Journal of Biophysics Vol.14 No.2, February 7, 2024

DOI: 10.4236/ojbiphy.2024.142005 249 Downloads 970 Views Citations
Role of Myeloid Cells in Regulating New Mechanisms of Bone Aging and Drug Therapy (Articles)

Xianqi Qin, Wujia Yang, Luo Dong, Luchang Chen, Jihua Wei

Journal of Biosciences and Medicines Vol.12 No.11, October 31, 2024

DOI: 10.4236/jbm.2024.1211003 90 Downloads 577 Views Citations
Cutting and other forms of derma-abuse in adolescents (Articles)

Hari D. Maharajh, Rainah Seepersad

Health Vol.2 No.4, May 4, 2010

DOI: 10.4236/health.2010.24055 6,160 Downloads 12,721 Views Citations
Optimization of Surface Milling of Hardened AISI4340 Steel with Minimal Fluid Application Using a High Velocity Narrow Pulsing Jet of Cutting Fluid (Articles)

K. Leo Dev Wins, A. S. Varadarajan, B. Ramamoorthy

Engineering Vol.2 No.10, November 29, 2010

DOI: 10.4236/eng.2010.210102 5,427 Downloads 10,360 Views Citations
Deep-Sea Cobalt Crusts Water Jet Cutting Ability (Articles)

Zhonghua Huang, Ya Xie

Geomaterials Vol.1 No.2, July 29, 2011

DOI: 10.4236/gm.2011.12007 6,479 Downloads 11,408 Views Citations
Improvement Properties of the Cutting Tools Using Technical Plasma Treatment (Articles)

Ferkous Embarek, Amara Idriss, Djeribaa Abdeldjalil, Boughouas Hamlaoui, Achour Slimane

Materials Sciences and Applications Vol.2 No.10, October 17, 2011

DOI: 10.4236/msa.2011.210197 4,871 Downloads 8,508 Views Citations
Improved Balas and Mazzola Linearization for Quadratic 0-1 Programs with Application in a New CuttingPlane Algorithm (Articles)

Wajeb Gharibi

International Journal of Communications, Network and System Sciences Vol.5 No.4, April 19, 2012

DOI: 10.4236/ijcns.2012.54026 4,987 Downloads 7,713 Views Citations
Machinability Study of Al-5Cu-TiB₂ In-situ Metal Matrix Composites Fabricated by Flux-assisted Synthesis (Articles)

A. Mahamani

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.13, November 1, 2011

DOI: 10.4236/jmmce.2011.1013097 4,176 Downloads 6,731 Views Citations
Comparative Assessment on Machinability of Nano-Structured Bainitic Steel and Titanium64 (Articles)

Ashwin Polishetty, Chinmay Sonavane, Prasad Patil, Guy Littlefair

Journal of Materials Science and Chemical Engineering Vol.2 No.7, July 8, 2014

DOI: 10.4236/msce.2014.27004 2,625 Downloads 4,347 Views Citations
Heat Resistant Properties of Some Elements-Incorporated Diamond-Like Carbon Films and Their Trial Applications for Micro End Mill Coatings (Articles)

Chavin Jongwannasiri, Nutthanun Moolsradoo, Shuichi Watanabe

Materials Sciences and Applications Vol.6 No.1, January 7, 2015

DOI: 10.4236/msa.2015.61002 2,880 Downloads 4,038 Views Citations
Age Strengthening of Grey Cast Iron Alloys for Machine Cutting Tools Production (Articles)

A. I. Opaluwa, A. Oyetunji, S. O. Seidu

Journal of Minerals and Materials Characterization and Engineering Vol.3 No.3, March 31, 2015

DOI: 10.4236/jmmce.2015.33013 4,186 Downloads 5,930 Views Citations
Optimal Stochastic Pine Stands Harvest Rotation Policies (Articles)

Eduardo Navarrete

Open Journal of Forestry Vol.5 No.6, August 6, 2015

DOI: 10.4236/ojf.2015.56053 5,173 Downloads 6,392 Views Citations
This article belongs to the Special Issue on Future Forests
Determining the Effect of Cutting Fluids on Surface Roughness in Turning AISI 1330 Alloy Steel Using Taguchi Method (Articles)

Onyemachi Joachim Onuoha, James Oseni Abu, Sunday Albert Lawal, Edeki Mudiare, Michael Bolaji Adeyemi

Modern Mechanical Engineering Vol.6 No.2, May 5, 2016

DOI: 10.4236/mme.2016.62006 4,141 Downloads 7,653 Views Citations

First <...234 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies