Suction Molding - Articles - Scientific Research Publishing

Effect of Molecular Weight and Molecular Distribution on Skin Structure and Shear Strength Distribution near the Surface of Thin-Wall Injection Molded Polypropylene (Articles)

Keisuke Maeda, Koji Yamada, Kazushi Yamada, Masaya Kotaki, Hiroyuki Nishimura

Open Journal of Organic Polymer Materials Vol.6 No.1, January 7, 2016

DOI: 10.4236/ojopm.2016.61001 4,467 Downloads 6,188 Views Citations
The Relationship between Bulk Property and Property Distribution in Thin-Wall Injection Molded PP at Different Molecular Weight and Molecular Weight Distribution (Articles)

Keisuke Maeda, Koji Yamada, Kazushi Yamada, Masaya Kotaki, Hiroyuki Nishimura

Advances in Materials Physics and Chemistry Vol.6 No.1, January 19, 2016

DOI: 10.4236/ampc.2016.61001 4,627 Downloads 5,978 Views Citations
A Novel Statistical Analysis for Residual Stress in Injection Molding (Articles)

Faisal Alkaabneh, Mahmoud Barghash, Yousef Abdullat

American Journal of Operations Research Vol.6 No.1, January 29, 2016

DOI: 10.4236/ajor.2016.61012 4,699 Downloads 6,806 Views Citations
Prediction of the Enhanced Out-of-Plane Thermal Conductivity of Carbon Fiber Composites Produced by VARTM (Articles)

Jens Schuster, Martin Schütz, Johannes Lutz, Laura Lempert

Open Journal of Composite Materials Vol.6 No.4, September 19, 2016

DOI: 10.4236/ojcm.2016.64010 2,042 Downloads 3,679 Views Citations
The Influence of Molding Density of TiO₂ Varistor-Ceramic on Densification of Ceramic Body and Grain Growth (Articles)

Yu Wang, Kemin Zhang, Wenge Li, Weihua Yao, Jinxin Ma, Xiaolin Zhang

Journal of Minerals and Materials Characterization and Engineering Vol.4 No.6, November 29, 2016

DOI: 10.4236/jmmce.2016.46031 1,407 Downloads 2,422 Views Citations
The Determination of Interfacial Shear Strength in Short Fiber Reinforced Poly Ethylene Terephthalate by Kelly-Tyson Theory (Articles)

Wiranphat Thodsaratpreeyakul, Putinun Uawongsuwan, Akio Kataoka, Takanori Negoro, Hiroyuki Hamada

Open Journal of Composite Materials Vol.7 No.4, July 27, 2017

DOI: 10.4236/ojcm.2017.74015 2,514 Downloads 5,053 Views Citations
This article belongs to the Special Issue on Composite Interface and Damages
Properties of Recycled-Polyethylene Terephthalate/Polycarbonate Blend Fabricated by Vented Barrel Injection Molding (Articles)

Wiranphat Thodsaratpreeyakul, Putinun Uawongsuwan, Takanori Negoro

Materials Sciences and Applications Vol.9 No.1, January 26, 2018

DOI: 10.4236/msa.2018.91012 1,812 Downloads 5,360 Views Citations
Parameter Prediction of Stretch-Blow Molding Process of PET Using Neural Networks (Articles)

Talal H. Alzanki, Mutaz M. Jafar

Journal of Software Engineering and Applications Vol.12 No.7, July 31, 2019

DOI: 10.4236/jsea.2019.127017 2,384 Downloads 10,800 Views Citations
Influence of Initial Value of Transient Time Step on Numerical Simulation of Blow Molding Balloon (Articles)

Jinyao Bian, Guobao Jin, Peng Qin, Guanghui Dai

American Journal of Computational Mathematics Vol.10 No.2, June 23, 2020

DOI: 10.4236/ajcm.2020.102014 735 Downloads 1,715 Views Citations
Fabrication and Characterization on Physico-Mechanical and Structural Properties of Sawdust Reinforced Acrylonitrile Butadiene Styrene (ABS) Composites (Articles)

Budrun Neher, Nabila Tasnim Nova, Rakib Hossain, M. A. Gafur, Farid Ahmed

Materials Sciences and Applications Vol.11 No.9, September 22, 2020

DOI: 10.4236/msa.2020.119043 1,232 Downloads 2,939 Views Citations
Comparison of DOE Programs (Articles)

Mani Bharadwaj Tirupathi, Yousuf Pasha Shaik, Jens Schuster

Open Access Library Journal Vol.11 No.3, March 29, 2024

DOI: 10.4236/oalib.1111200 143 Downloads 1,143 Views Citations
Non-Darcy Flow in Molding Sands (Articles)

Miguel A. Barron-Meza, Joan Reyes-Miranda, Daniel Flores-Sanchez

Open Journal of Applied Sciences Vol.14 No.4, April 18, 2024

DOI: 10.4236/ojapps.2024.144064 196 Downloads 753 Views Citations
High Efficiency PGM Setup Cycle of Photovoltaic Components via Numerical Simulation (Articles)

Gabriela Kehlerová, Marcel Horák, Ivo Matoušek

Materials Sciences and Applications Vol.16 No.5, May 29, 2025

DOI: 10.4236/msa.2025.165017 107 Downloads 401 Views Citations
Design of Rubber Injection Molding Mold for Windshield in High-Speed EMU (Articles)

Jihong Zuo, Lei Wang, Yi Liu, Gaoxiang Rong

World Journal of Engineering and Technology Vol.13 No.3, August 26, 2025

DOI: 10.4236/wjet.2025.133044 173 Downloads 742 Views Citations
Exploring Bamboo Fiber Reinforced Acrylonitrile Butadiene Styrene (ABS) Polymer Composite by Characterization of Physical, Mechanical and Structural Properties (Articles)

Rabeya Akter, Md Rashedul Islam, Budrun Neher, Md Abdul Gafur, Farid Ahmed

Materials Sciences and Applications Vol.16 No.9, September 3, 2025

DOI: 10.4236/msa.2025.169027 89 Downloads 696 Views Citations
Lie Group Analysis for the Effects of Variable Fluid Viscosity and Thermal Radiation on Free Convective Heat and Mass Transfer with Variable Stream Condition (Articles)

P. Loganathan, P. Puvi Arasu

Engineering Vol.2 No.8, September 9, 2010

DOI: 10.4236/eng.2010.28080 8,089 Downloads 12,395 Views Citations
Periodic Wall Blow/Suction Perturbation Evolution in Turbulent Boundary Layer (Articles)

Gangli Hao, Nan Jiang

Applied Mathematics Vol.3 No.9, September 27, 2012

DOI: 10.4236/am.2012.39153 4,675 Downloads 7,470 Views Citations
An Experimental Investigation on the Quasi-Static Flotation Transport of a Glass Substrate Using Vortex Bearing Elements (Articles)

Xin Li, Yoshihiro Nakamura, Mikio Horie, Toshiharu Kagawa

Journal of Flow Control, Measurement & Visualization Vol.1 No.1, April 29, 2013

DOI: 10.4236/jfcmv.2013.11002 4,127 Downloads 7,999 Views Citations
Endometrial Scratch-Suction and Implantation Failure (Articles)

Wael S. Nossair, Manal M. El Behery, Mohamed Al S. Farag

Open Journal of Obstetrics and Gynecology Vol.4 No.5, March 20, 2014

DOI: 10.4236/ojog.2014.45036 6,004 Downloads 8,551 Views Citations
Boundary Layer Stagnation-Point Slip Flow and Heat Transfer towards a Shrinking/Stretching Cylinder over a Permeable Surface (Articles)

Nor Azian Aini Mat, Norihan Md. Arifin, Roslinda Nazar, Norfifah Bachok

Applied Mathematics Vol.6 No.3, March 10, 2015

DOI: 10.4236/am.2015.63044 3,853 Downloads 5,548 Views Citations

First <...234 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies