Open Cast Mine/Quarry - Articles - Scientific Research Publishing

Long Term Outcomes of Management of Open Fractures of Long Bone among Patients with a Surgical Implant Generation Network Nail at Kumi Orthopaedic Center, Uganda (Articles)

John Ekure, Naomi Amuron, Douglas Kilama, Phillip Buluma, Andrew Iloket, Akellot Daniella, Faith Akello

Open Journal of Orthopedics Vol.14 No.12, December 31, 2024

DOI: 10.4236/ojo.2024.1412055 126 Downloads 772 Views Citations
Management of Open Leg Fractures at Zinder National Hospital (Articles)

Abdou Taofik Moussa, Souleymane Adoum Fils, Abdoulaye Idrissa Abdoul Madjid, Magagi Ibrahim, Idé Garba, Kané Kaka Mm, Abdoul Wahab Allasane Mohamed, Doutchi Mahamadou, Habou Oumarou, Adamou Harissou

Surgical Science Vol.16 No.1, January 26, 2025

DOI: 10.4236/ss.2025.161007 133 Downloads 623 Views Citations
Surface and Bulk Defects in Cr-Mn Iron Alloy Cast in Metal and Sand Moulds: Characterization by Positron Annihilation Techniques (Articles)

Parthasarathy Sampathkumaran, Subramanyam Seetharamu, Chikkakuntappa Ranganathaiah, Jaya Madhu Raj, Pradeep Kumar Pujari, Priya Maheshwari, Debashish Dutta, S. Kishore

Journal of Surface Engineered Materials and Advanced Technology Vol.1 No.3, October 18, 2011

DOI: 10.4236/jsemat.2011.13021 4,698 Downloads 9,025 Views Citations
Quadratic Model for Predicting the Hardness of Heat Affected Zone in Water Cooled Cast Iron Weldment In Relation to Similarly Cooled Aluminum and Mild Steel Weldments (Articles)

C. I. Nwoye

Journal of Minerals and Materials Characterization and Engineering Vol.8 No.10, October 20, 2009

DOI: 10.4236/jmmce.2009.810066 5,420 Downloads 7,110 Views Citations
Hardening Characteristics of Plain Carbon Steel and Ductile Cast Iron Using Neem Oil as Quenchant (Articles)

S. B. Hassan, J.B. Agboola, V.S. Aigbodion, E.J. Williams

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.2, February 20, 2011

DOI: 10.4236/jmmce.2011.102011 8,757 Downloads 11,996 Views Citations
Models for Assessment and Computational Analysis of Hardness of the Heat Affected Zone in Water Cooled Aluminum Weldment (Articles)

C. I. Nwoye, C. N. Anyakwo, E. Obidiegwu, N. E. Nwankwo

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.8, June 27, 2011

DOI: 10.4236/jmmce.2011.108055 4,948 Downloads 6,422 Views Citations
Research of Crystallization of Aluminums Cast Iron (Articles)

Saule Kaldybayeva

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.13, November 1, 2011

DOI: 10.4236/jmmce.2011.1013092 5,059 Downloads 6,629 Views Citations
Optimization of Friction and Wear Behaviour in Hybrid Metal Matrix Composites Using Taguchi Technique (Articles)

V. C. Uvaraja, N. Natarajan

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.8, August 20, 2012

DOI: 10.4236/jmmce.2012.118063 8,951 Downloads 12,715 Views Citations
Evaluation of Corrosion Behaviour of Grey Cast Iron and Low Alloy Steel in Cocoa Liquor and Well Water (Articles)

John Oluyemi Olawale, Jamiu Kolawole Odusote, Abuldkarim Baba Rabiu, Emmanuel Onazi Ochapa

Journal of Minerals and Materials Characterization and Engineering Vol.1 No.2, March 28, 2013

DOI: 10.4236/jmmce.2013.12009 7,030 Downloads 10,493 Views Citations
Effect of Reinforcement Clustering on Crack Initiation Mechanism in a Cast Hybrid Metal Matrix Composite during Low Cycle Fatigue (Articles)

A. K. M. Asif Iqbal, Yoshio Arai, Wakako Araki

Open Journal of Composite Materials Vol.3 No.4, September 12, 2013

DOI: 10.4236/ojcm.2013.34010 5,235 Downloads 10,182 Views Citations
Predictability of Al-Mn Alloy Exposure Time Based on Its As-Cast Weight and Corrosion Rate in Sea Water Environment (Articles)

Chukwuka Nwoye, Simeon Neife, Ebere Ameh, Awo Nwobasi, Ndubuisi Idenyi

Journal of Minerals and Materials Characterization and Engineering Vol.1 No.6, November 26, 2013

DOI: 10.4236/jmmce.2013.16046 3,164 Downloads 4,755 Views Citations
Predictability of Hardness of the Heat Affect Zone in Aluminum Weldments Cooled in Palm Oil Based on Hardness of Similarly Cooled Mild Steel and Cast Iron Weldments (Articles)

Chukwuka Nwoye, Stanley Nwakpa, Agbo Alfred, Chidume Nwambu, Uche Obialor

Journal of Minerals and Materials Characterization and Engineering Vol.1 No.6, November 27, 2013

DOI: 10.4236/jmmce.2013.16055 3,641 Downloads 5,333 Views Citations
Axial Load Capacity of Cast in Place Piles from SPT and CPTU Data (Articles)

Ergys Anamali, Neritan Shkodrani, Luisa Dhimitri

World Journal of Engineering and Technology Vol.2 No.2, May 27, 2014

DOI: 10.4236/wjet.2014.22011 7,003 Downloads 9,592 Views Citations
Microstructural Evolution of Cast Hyper-Eutectic Al-18% Si Alloy during Cyclic Semi-Solid Heat Treatment (Articles)

Mohamed Ramadan

Journal of Minerals and Materials Characterization and Engineering Vol.3 No.5, August 24, 2015

DOI: 10.4236/jmmce.2015.35041 7,261 Downloads 9,100 Views Citations
Air Tightness Control of Passenger Car Wheels (Articles)

Vatroslav Grubisic

Engineering Vol.9 No.2, February 27, 2017

DOI: 10.4236/eng.2017.92008 2,455 Downloads 4,798 Views Citations
Impact Properties of Austempered Spheroidal Graphite Cast Irons (Articles)

Tohru Nobuki, Minoru Hatate, Toshio Shiota

Materials Sciences and Applications Vol.8 No.13, December 8, 2017

DOI: 10.4236/msa.2017.813069 1,243 Downloads 3,644 Views Citations
This article belongs to the Special Issue on Material Microstructure, Properties and Applications
Low Porosity in Cast Magnesium Welds by Advanced Laser Twin-Spot Welding (Articles)

Karl Fahlström, Jon Blackburn, Leif Karlsson, Lars-Erik Svensson

Materials Sciences and Applications Vol.10 No.1, January 16, 2019

DOI: 10.4236/msa.2019.101006 1,072 Downloads 2,088 Views Citations
This article belongs to the Special Issue on Material Processing
Effect of Cu-Ni and Cu-Ni-Mn on the Microstructural and Mechanical Behaviour of As-Cast Non-Inoculated Hypereutectic Grey Iron (Articles)

Seidu Ojo, Adama Sumaila, Onigbajumo Adetunji

Journal of Minerals and Materials Characterization and Engineering Vol.8 No.2, March 20, 2020

DOI: 10.4236/jmmce.2020.82003 829 Downloads 3,343 Views Citations
Comparative Study of Structural, Optical and Electrical Properties of SnO₂ Thin Film Growth via CBD, Drop-Cast and Dip-Coating Methods (Articles)

Md. Tareq Rahman, Zubair Ahmed, Md. Johurul Islam, Kamaruzzaman, Mst. Toma Khatun, Md. Abdul Gafur, Md. Shahriar Bashar, Md. Monjarul Alam

Materials Sciences and Applications Vol.12 No.12, December 9, 2021

DOI: 10.4236/msa.2021.1212038 766 Downloads 3,542 Views Citations
Fabrication and Characterization of Semi-Crystalline and Amorphous Dielectric Polymer Films for Energy Storage (Articles)

Hakeem Ayornu, Sohail Anwar, Yash Thakur

Materials Sciences and Applications Vol.13 No.11, November 28, 2022

DOI: 10.4236/msa.2022.1311034 317 Downloads 1,441 Views Citations

First <...234 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies