Nanofilled; Wear; Flexural Strength; Toughness; Composite Resin - Articles

Experimental Investigation on the Properties of Recycled Concrete Using Hybrid Fibers (Articles)

Salim Khoso, Janet Raad, Azadeh Parvin

Open Journal of Composite Materials Vol.9 No.2, April 16, 2019

DOI: 10.4236/ojcm.2019.92009 1,554 Downloads 3,768 Views Citations
Influence of Boron Fiber Powder and Graphite Reinforcements on Physical and Mechanical Properties of Aluminum 2024 Alloy Fabricated by Stir Casting (Articles)

H. S. Kumaraswamy, Vinjamuri Bharat, T. Krishna Rao

Journal of Minerals and Materials Characterization and Engineering Vol.7 No.3, April 19, 2019

DOI: 10.4236/jmmce.2019.73008 1,129 Downloads 2,556 Views Citations
The Use of Fine Blast Furnace Slag in Improvement of Properties of Concrete (Articles)

Hamadallah Al-Baijat, Mohmd Sarireh

Open Journal of Civil Engineering Vol.9 No.2, April 30, 2019

DOI: 10.4236/ojce.2019.92007 1,552 Downloads 4,665 Views Citations
Evaluate the Strength of Denim Goods Using Different Washing Technique (Articles)

Jakaria Ahamed, Md. Faysal Mahmud, Md. Faysal Ahammed, Rony Mia, Md. Zahid Hasan, Tarequl Hasan Khan, Golam Qibria Limon, Al Mojnun Shamim

Journal of Materials Science and Chemical Engineering Vol.9 No.3, March 8, 2021

DOI: 10.4236/msce.2021.93001 1,290 Downloads 7,555 Views Citations
Effects of a 5-Week Linear Periodization Program on Maximal Strength and Speed on Elite Squash Players (Articles)

Jorg Teichmann, Allan Pete Soyza, Ali Habib Harb, Kieran Stefan Allan, Rachel Tan Ee

Advances in Physical Education Vol.11 No.4, September 29, 2021

DOI: 10.4236/ape.2021.114031 635 Downloads 3,519 Views Citations
Effect of Steel Fiber on Concrete’s Compressive Strength (Articles)

Mohammed Saed Yusuf, Abdirisak Bashir Isak, Guled Ali Mohamud, Abdullahi Hashi Warsame, Yahye Ibrahim Osman, Abdullahi Husein Ibrahim, Liban Abdi Aziz Elmi

Open Journal of Civil Engineering Vol.13 No.1, March 31, 2023

DOI: 10.4236/ojce.2023.131014 676 Downloads 4,726 Views Citations
Experimental Study of the Physical and Mechanical Behaviour of Mortar Formulations with Fine Sands of Recycled Glass (Articles)

Apedjinou Dodji Kplolanyo, Samah Essoavama Ouro-Djobo, Amey Kossi Bollanigni, Kassegne Komlan Assogba, Tiem Sonnou

Open Journal of Civil Engineering Vol.13 No.2, June 8, 2023

DOI: 10.4236/ojce.2023.132019 226 Downloads 910 Views Citations
Use of Plant-Based Accelerator to Enhance Rate of Gain of Strength of Kenyan Blended Cement (Articles)

Ezekiel Oyugi Onjure, Charles Karimi Kabubo, Victoria Okumu

Open Journal of Civil Engineering Vol.13 No.3, August 1, 2023

DOI: 10.4236/ojce.2023.133030 247 Downloads 1,044 Views Citations
Weld Joint Efficiency of the Kazakhstani Constructional Steel (Articles)

Begman Kulbayev, Vladimir Lapin, Alexander Shakhnovich, Tursymbai Tuleyev, Serik Aldakhov, Yerken Aldakhov, Alimzhan Ali

Open Journal of Civil Engineering Vol.13 No.4, December 28, 2023

DOI: 10.4236/ojce.2023.134052 211 Downloads 737 Views Citations
In vitro evaluation of a new resilient, hard-carbon, thin-film coating as a bearing material for ventricular assist devices ——In Vitro Bearing Evaluation of BioMedFlex (Articles)

Nicole A. Mielke, Alex L. Massiello, David J. Horvath, Stephen M. Benefit, Darren Burgess, Leonard A. R. Golding, Kiyotaka Fukamachi

Journal of Biomedical Science and Engineering Vol.3 No.5, May 27, 2010

DOI: 10.4236/jbise.2010.35073 5,021 Downloads 9,509 Views Citations
Influence of Coolant in Machinability of Titanium Alloy (Ti-6Al-4V) (Articles)

Muthukrishnan Namb, Davim Paulo

Journal of Surface Engineered Materials and Advanced Technology Vol.1 No.1, March 17, 2011

DOI: 10.4236/jsemat.2011.11002 11,183 Downloads 23,633 Views Citations
High Pressure Water-Jet Technology for the Surface Treatment of Al-Si Alloys and Repercussion on Tribological Properties (Articles)

Md. Aminul Islam, Zoheir Farhat, Jonathon Bonnell

Journal of Surface Engineered Materials and Advanced Technology Vol.1 No.3, October 18, 2011

DOI: 10.4236/jsemat.2011.13017 6,730 Downloads 13,125 Views Citations
Application of a Computational Tool to Study the Influence of Worn Wheels on Railway Vehicle Dynamics (Articles)

João Pombo

Journal of Software Engineering and Applications Vol.5 No.2, February 27, 2012

DOI: 10.4236/jsea.2012.52009 9,210 Downloads 14,429 Views Citations
On the Wear Behavior of Cyanoacrylate in Presence of Nano-Sized SiO₂ (Articles)

Amir Yaghmaei, Seyed Mojtaba Zebarjad, Mehrdad Kashefi

Engineering Vol.4 No.5, May 24, 2012

DOI: 10.4236/eng.2012.45032 4,528 Downloads 7,687 Views Citations
Effect of Melting Temperature on the Wear Characteristics of Austenitic Manganese Steel (Articles)

S.A. Balogun, D.E. Esezobor, J.O. Agunsoye

Journal of Minerals and Materials Characterization and Engineering Vol.7 No.3, September 20, 2008

DOI: 10.4236/jmmce.2008.73021 13,565 Downloads 22,485 Views Citations
Tribological Behaviour of Aluminium/Alumina/Graphite Hybrid Metal Matrix Composite Using Taguchi’s Techniques (Articles)

N. Radhika, R. Subramanian, S. Venkat Prasat

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.5, April 20, 2011

DOI: 10.4236/jmmce.2011.105032 11,794 Downloads 19,980 Views Citations
Thermal Sprayed CNT Reinforced Nanocomposite Coatings – A Review (Articles)

Manoj Kumar Singla, Harpreet Singh, Vikas Chawla

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.8, June 27, 2011

DOI: 10.4236/jmmce.2011.108056 9,994 Downloads 14,788 Views Citations
Effect of Electrode Materials on Electric Discharge Machining of 316 L and 17 - 4 PH Stainless Steels (Articles)

Subramanian Gopalakannan, Thiagarajan Senthilvelan

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.7, July 25, 2012

DOI: 10.4236/jmmce.2012.117053 9,342 Downloads 13,862 Views Citations
Optimization of Friction and Wear Behaviour in Hybrid Metal Matrix Composites Using Taguchi Technique (Articles)

V. C. Uvaraja, N. Natarajan

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.8, August 20, 2012

DOI: 10.4236/jmmce.2012.118063 8,899 Downloads 12,623 Views Citations
Preparation & Characterization of Al-5083 Alloy Composites (Articles)

Sourabh Gargatte, Rahul R. Upadhye, Venkatesh S. Dandagi, Srikanth R. Desai, Bhimappa S. Waghamode

Journal of Minerals and Materials Characterization and Engineering Vol.1 No.1, January 26, 2013

DOI: 10.4236/jmmce.2013.11002 5,537 Downloads 9,440 Views Citations

First <...282930 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies