Polyacrylonitrile; Stabilization; Carbonization; XRD; Tensile Properties; Carbon Fibers - Articles

Influence of Solvent onto Chemical Extraction of America-Type Coconut (Coco nucifera L.) Fbers: Analysis of Physicochemical, Mechanical and Morphological Properties (Articles)

Delphine Korgai Gandai, Zara Haman, Djoda Pagore Frederic, Memtine Ndong Augustin, Abdourhamane Nsangou, Niraka Blaise, Hambate Gomdje Valery

Journal of Textile Science and Technology Vol.10 No.3, August 16, 2024

DOI: 10.4236/jtst.2024.103005 120 Downloads 692 Views Citations
Physical and Thermo-Mechanical Properties of Composite Materials Based on Raw Earth and Crushed Palm Leaf Fibers (Borassus aethiopum) (Articles)

Mouhamadou Nabi Kane, Mapathe Ndiaye, Pape Moussa Touré, Adama Dione

Materials Sciences and Applications Vol.15 No.9, September 19, 2024

DOI: 10.4236/msa.2024.159025 114 Downloads 927 Views Citations
Characterization of the Pultrusion Process for Graphite/BMI Composites: A Review of Experimental Methods, Industrial Practices, and Optimization Strategies (Articles)

Kok Toong Leong

World Journal of Engineering and Technology Vol.14 No.1, January 9, 2026

DOI: 10.4236/wjet.2026.141008 102 Downloads 498 Views Citations
Comparative Evaluation of High-Performance Mortars Incorporating Silica Fume, Fly Ash, and Polypropylene Fibers (Articles)

Yousry Shaheen, Ayman Hussein H. Khalil, Essam Eltehawy, Salaheldin Hassan

Journal of Building Construction and Planning Research Vol.14 No.1, March 18, 2026

DOI: 10.4236/jbcpr.2026.141004 45 Downloads 242 Views Citations
Modifications in the Stress Field of a Long Inclined Fault Caused by the Welded-Contact Boundary Conditions across the Interface between Two Elastic Half-Spaces (Articles)

Sunita Rani, Sarva Jit Singh

Engineering Vol.2 No.3, April 13, 2010

DOI: 10.4236/eng.2010.23023 5,468 Downloads 9,427 Views Citations
The Potential of Silane Coated Calcium Carbonate on Mechanical Properties of Rigid PVC Composites for Pipe Manufacturing (Articles)

Amin Al Robaidi, Ahmad Mousa, Sami Massadeh, Ibrahim Al Rawabdeh, Nabil Anagreh

Materials Sciences and Applications Vol.2 No.5, May 23, 2011

DOI: 10.4236/msa.2011.25065 7,944 Downloads 14,769 Views Citations
Non-Contact Stress Measurement during Tensile Testing Using an Emat for SH₀-Plate Wave and Lamb Wave (Articles)

Riichi Murayama

Journal of Sensor Technology Vol.1 No.3, September 30, 2011

DOI: 10.4236/jst.2011.13009 5,872 Downloads 13,294 Views Citations
Utilization of Granite Powder as a Filler for Polybutylene Terepthalate Toughened Epoxy Resin (Articles)

H. V. Ramakrishna, S. K Rai

Journal of Minerals and Materials Characterization and Engineering Vol.5 No.1, June 12, 2006

DOI: 10.4236/jmmce.2006.51001 7,013 Downloads 9,120 Views Citations
Optimum Calcium Carbonate Filler Concentration for Flexible Polyurethane Foam Composite (Articles)

M. A. Usman, S. O. Adeosun, G. O. Osifeso

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.3, March 20, 2012

DOI: 10.4236/jmmce.2012.113023 13,951 Downloads 19,796 Views Citations
Effect of Soaking Time on the Mechanical Properties of Annealed Cold-Drawn Low Carbon Steel (Articles)

Nurudeen Adekunle Raji, Oluleke Olugbemiga Oluwole

Materials Sciences and Applications Vol.3 No.8, August 22, 2012

DOI: 10.4236/msa.2012.38072 17,221 Downloads 24,689 Views Citations
Aging Effect on Characteristics of Oil Impregnated Insulation Paper for Power Transformers (Articles)

Loai S. Nasrat, Nesrine Kassem, Nadia Shukry

Engineering Vol.5 No.1, January 8, 2013

DOI: 10.4236/eng.2013.51001 9,405 Downloads 15,219 Views Citations
Self Compacting Concrete under Local Conditions (Articles)

Abderahmane Seddik, Ahmed Beroual, Abdesselam Zergua, Mohamed Nacer Guetteche

Open Journal of Civil Engineering Vol.3 No.2, June 14, 2013

DOI: 10.4236/ojce.2013.32014 5,927 Downloads 11,036 Views Citations
Physico-Mechanical Responses of Polypropylene-CaCO₃ Composite (Articles)

Samson Oluropo Adeosun, Mohammed Awwalu Usman, Wasiu Ajibola Ayoola, Muyideen Adebayo Bodud

Journal of Minerals and Materials Characterization and Engineering Vol.1 No.4, July 10, 2013

DOI: 10.4236/jmmce.2013.14025 6,251 Downloads 10,129 Views Citations
Acoustic Emission Characterization of Matrix Damage Initiation in Woven CFRP Composites (Articles)

Mostefa Bourchak, Adnan Khan, Salah A. Badr, Wail Harasani

Materials Sciences and Applications Vol.4 No.9, September 3, 2013

DOI: 10.4236/msa.2013.49062 5,141 Downloads 8,180 Views Citations
Effects of Gas Metal Arc Welding Techniques on the Mechanical Properties of Duplex Stainless Steel (Articles)

Tanimu Ibrahim, Danjuma S. Yawas, Shekarau Y. Aku

Journal of Minerals and Materials Characterization and Engineering Vol.1 No.5, September 5, 2013

DOI: 10.4236/jmmce.2013.15035 5,237 Downloads 8,019 Views Citations
Fracture Response of Reinforced Concrete Deep Beams Finite Element Investigation of Strength and Beam Size (Articles)

Guillermo A. Riveros, Vellore Gopalaratnam

Applied Mathematics Vol.4 No.11, November 5, 2013

DOI: 10.4236/am.2013.411212 5,345 Downloads 8,583 Views Citations
Study of Mechanical and Physical Properties of Palm Fiber Reinforced Acrylonitrile Butadiene Styrene Composite (Articles)

Budrun Neher, Md. Mahbubur Rahman Bhuiyan, Humayun Kabir, Md. Rakibul Qadir, Md. Abdul Gafur, Farid Ahmed

Materials Sciences and Applications Vol.5 No.1, January 27, 2014

DOI: 10.4236/msa.2014.51006 8,858 Downloads 14,341 Views Citations
Experimental Study on the Mechanical Properties of FRP Bars by Hybridizing with Steel Wires (Articles)

Ji-Hyun Hwang, Dong-Woo Seo, Ki-Tae Park, Young-Jun You

Engineering Vol.6 No.7, June 11, 2014

DOI: 10.4236/eng.2014.67039 5,130 Downloads 7,505 Views Citations
Comparative Studies of Steel, Bamboo and Rattan as Reinforcing Bars in Concrete: Tensile and Flexural Characteristics (Articles)

Adekunle P. Adewuyi, Adegboyega A. Otukoya, Oluwole A. Olaniyi, Oladipupo S. Olafusi

Open Journal of Civil Engineering Vol.5 No.2, June 18, 2015

DOI: 10.4236/ojce.2015.52023 8,452 Downloads 15,496 Views Citations
A Combined Discrete Event—Agent Based Approach to Modeling Tensile Strength of One-Dimensional Fibrous Materials. Face Validation and Effect of the Basic Model Parameters (Articles)

Arkady Cherkassky, Eugene Bumagin

Journal of Textile Science and Technology Vol.1 No.2, July 8, 2015

DOI: 10.4236/jtst.2015.12006 3,815 Downloads 5,106 Views Citations

First <...272829 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies