Alloy steel - Articles - Scientific Research Publishing

Facile Synthesis of Porous SnSb Alloy Anode for Li-Ion Battery (Articles)

Wei Fan, Chunling Qin, Weimin Zhao, Bo Liao

Materials Sciences and Applications Vol.10 No.1, December 29, 2018

DOI: 10.4236/msa.2019.101001 1,253 Downloads 2,929 Views Citations
Low Porosity in Cast Magnesium Welds by Advanced Laser Twin-Spot Welding (Articles)

Karl Fahlström, Jon Blackburn, Leif Karlsson, Lars-Erik Svensson

Materials Sciences and Applications Vol.10 No.1, January 16, 2019

DOI: 10.4236/msa.2019.101006 1,051 Downloads 2,041 Views Citations
This article belongs to the Special Issue on Material Processing
Microstructure and Quasi-Static Mechanical Behavior of Cryoforged AA2519 Alloy (Articles)

Amin Azimi, Gbadebo Moses Owolabi, Hamid Fallahdoost, Nikhil Kumar, Horace Whitworth

Materials Sciences and Applications Vol.10 No.2, January 30, 2019

DOI: 10.4236/msa.2019.102011 1,146 Downloads 2,530 Views Citations
Application of Fe-Ni-W Plated Film Electrode to Zinc-Air Battery (Articles)

Sachio Yoshihara, Hikari Ohtake, Jiu Sasaki

Journal of Materials Science and Chemical Engineering Vol.7 No.12, December 20, 2019

DOI: 10.4236/msce.2019.712007 631 Downloads 1,415 Views Citations
Study of Corrosion on Film Properties of High Strength Cu-Sn-Zr Alloys in Tap Water (Articles)

Itaru Ikeda, Noriyuki Tanaka, Motoki Kuratani, Yutaka Yamada, Osamu Sakurada

Materials Sciences and Applications Vol.11 No.1, January 15, 2020

DOI: 10.4236/msa.2020.111006 759 Downloads 1,748 Views Citations
This article belongs to the Special Issue on Corrosion and Protection of Materials
A Qualitative Study of the Influence of Grooved Mold Surface Topography on the Formation of Surface Marks on As-Cast Ingots of Aluminum Alloy 3003 (Articles)

Prince N. Anyalebechi

Materials Sciences and Applications Vol.11 No.4, April 30, 2020

DOI: 10.4236/msa.2020.114018 855 Downloads 2,417 Views Citations
Recent Advances on Preparation Method of Ti-Based Hydrogen Storage Alloy (Articles)

Lina Liang, Feng Wang, Maohua Rong, Zhongmin Wang, Songtao Yang, Jiang Wang, Huaiying Zhou

Journal of Materials Science and Chemical Engineering Vol.8 No.12, December 22, 2020

DOI: 10.4236/msce.2020.812003 1,583 Downloads 4,630 Views Citations
Residual Stress Distribution of Asymmetric Quenching in Al-Zn-Mg-Cu Aluminum Alloy Plate (Articles)

Yanan Li, Guohui Shi

Journal of Materials Science and Chemical Engineering Vol.9 No.4, April 9, 2021

DOI: 10.4236/msce.2021.94002 583 Downloads 1,551 Views Citations
Suitability of Suluu-Terek Basalt Deposits for Stone Casting (Articles)

Zhanbolot Aidaraliev, Imiyla Rysbaeva, Rakhat Atyrova, Akimbek Abdykalykov, Baktygul Bekbolot Kyzy, Chynara Zholdoshova, Nematilla Sopubekov, Altynbek Kuduev, Iurii Dubinin, Zhypargul Abdullaeva

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.1, December 13, 2021

DOI: 10.4236/jmmce.2022.101001 342 Downloads 1,442 Views Citations
The Fabrication Method and Tribological Properties of Co-TiC Sintered High-Temperature Alloy (Articles)

Oleksandr Tisov, Alina Yurchuk, Magda Wlazło-Ćwiklińska

Journal of Materials Science and Chemical Engineering Vol.10 No.4, April 29, 2022

DOI: 10.4236/msce.2022.104004 218 Downloads 1,025 Views Citations
An Investigation of the Effects of Thermal Interference between Adjacent Nitinol Spring Actuators in a Tactile Display (Articles)

Kudzanai Sekerere, Rehema Ndeda, Karanja Kabini

World Journal of Engineering and Technology Vol.11 No.1, February 28, 2023

DOI: 10.4236/wjet.2023.111010 586 Downloads 1,221 Views Citations
Microstructure Distribution Characteristics of High-Strength Aluminum Alloy Thin-Walled Tubes during Multi-Passes Hot Power Backward Spinning Process (Articles)

Yuan Tian, Ranyang Zhang, Gangyao Zhao, Zhenghua Guo

Journal of Materials Science and Chemical Engineering Vol.11 No.7, July 31, 2023

DOI: 10.4236/msce.2023.117008 113 Downloads 670 Views Citations
Static and Thermal Analysis of Aluminium (413,390,384 and 332) Piston Using Finite Element Method (Articles)

Offei David Inusah, Jacob Kwaku Nkrumah, Vincent Akolbire Atindana

Modeling and Numerical Simulation of Material Science Vol.14 No.1, November 28, 2023

DOI: 10.4236/mnsms.2024.141001 379 Downloads 1,709 Views Citations
Artificial Neural Network and Fuzzy Logic Based Techniques for Numerical Modeling and Prediction of Aluminum-5%Magnesium Alloy Doped with REM Neodymium (Articles)

Anukwonke Maxwell Chukwuma, Chibueze Ikechukwu Godwills, Cynthia C. Nwaeju, Osakwe Francis Onyemachi

International Journal of Nonferrous Metallurgy Vol.11 No.1, January 17, 2024

DOI: 10.4236/ijnm.2024.111001 270 Downloads 987 Views Citations
Effectiveness of Sodium Silicate on the Corrosion Protection of AA7075-T6 Aluminium Alloy in Sodium Chloride Solution (Articles)

Francesco Rosalbino, Giorgio Scavino, Graziano Ubertalli

Materials Sciences and Applications Vol.15 No.4, April 15, 2024

DOI: 10.4236/msa.2024.154005 610 Downloads 1,744 Views Citations
Effects of Pre-Strain on Bake Hardenability and Precipitation Behavior of Al-Mg-Si Automotive Body Sheets (Articles)

Guanjun Gao, Lizhen Yan, Xiwu Li

Journal of Materials Science and Chemical Engineering Vol.12 No.7, July 31, 2024

DOI: 10.4236/msce.2024.127005 142 Downloads 658 Views Citations
The Effect of Cold Rolling Process on Microstructure Evolution and Performance of Thin-Walled Titanium Alloy Tubes (Articles)

Jiawei Wang, Gang Li, Xiaoqing Song, Pengwei Wang, Sha Wang, Dengchao Luo

World Journal of Engineering and Technology Vol.14 No.1, February 14, 2026

DOI: 10.4236/wjet.2026.141014 53 Downloads 380 Views Citations
A Predictive Modeling Based on Regression and Artificial Neural Network Analysis of Laser Transformation Hardening for Cylindrical Steel Workpieces (Articles)

Ahmed Ghazi Jerniti, Abderazzak El Ouafi, Noureddine Barka

Journal of Surface Engineered Materials and Advanced Technology Vol.6 No.4, October 12, 2016

DOI: 10.4236/jsemat.2016.64014 1,747 Downloads 3,101 Views Citations
A Comparative Study on the Microstructures and Mechanical Properties of Al 6061 Alloy and the MMC Al 6061/TiB₂/12_p (Articles)

T.V. Christy, N. Murugan, S. Kumar

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.1, January 20, 2010

DOI: 10.4236/jmmce.2010.91005 13,240 Downloads 24,344 Views Citations
Theoretical Study on the Origins of the Gap Bowing in Mg_xZn_1–xO Alloys (Articles)

F. Z. Aoumeur-Benkabou, M. Ameri, A. Kadoun, K. Benkabou

Modeling and Numerical Simulation of Material Science Vol.2 No.3, July 26, 2012

DOI: 10.4236/mnsms.2012.23007 5,202 Downloads 10,329 Views Citations

First <...192021 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies