Multi-Component-Injection Molding MCM Method - Articles

Effect of Molecular Weight and Molecular Distribution on Skin Structure and Shear Strength Distribution near the Surface of Thin-Wall Injection Molded Polypropylene (Articles)

Keisuke Maeda, Koji Yamada, Kazushi Yamada, Masaya Kotaki, Hiroyuki Nishimura

Open Journal of Organic Polymer Materials Vol.6 No.1, January 7, 2016

DOI: 10.4236/ojopm.2016.61001 4,466 Downloads 6,184 Views Citations
The Relationship between Bulk Property and Property Distribution in Thin-Wall Injection Molded PP at Different Molecular Weight and Molecular Weight Distribution (Articles)

Keisuke Maeda, Koji Yamada, Kazushi Yamada, Masaya Kotaki, Hiroyuki Nishimura

Advances in Materials Physics and Chemistry Vol.6 No.1, January 19, 2016

DOI: 10.4236/ampc.2016.61001 4,626 Downloads 5,974 Views Citations
A Novel Statistical Analysis for Residual Stress in Injection Molding (Articles)

Faisal Alkaabneh, Mahmoud Barghash, Yousef Abdullat

American Journal of Operations Research Vol.6 No.1, January 29, 2016

DOI: 10.4236/ajor.2016.61012 4,697 Downloads 6,800 Views Citations
Prediction of the Enhanced Out-of-Plane Thermal Conductivity of Carbon Fiber Composites Produced by VARTM (Articles)

Jens Schuster, Martin Schütz, Johannes Lutz, Laura Lempert

Open Journal of Composite Materials Vol.6 No.4, September 19, 2016

DOI: 10.4236/ojcm.2016.64010 2,041 Downloads 3,675 Views Citations
The Influence of Molding Density of TiO₂ Varistor-Ceramic on Densification of Ceramic Body and Grain Growth (Articles)

Yu Wang, Kemin Zhang, Wenge Li, Weihua Yao, Jinxin Ma, Xiaolin Zhang

Journal of Minerals and Materials Characterization and Engineering Vol.4 No.6, November 29, 2016

DOI: 10.4236/jmmce.2016.46031 1,407 Downloads 2,419 Views Citations
The Determination of Interfacial Shear Strength in Short Fiber Reinforced Poly Ethylene Terephthalate by Kelly-Tyson Theory (Articles)

Wiranphat Thodsaratpreeyakul, Putinun Uawongsuwan, Akio Kataoka, Takanori Negoro, Hiroyuki Hamada

Open Journal of Composite Materials Vol.7 No.4, July 27, 2017

DOI: 10.4236/ojcm.2017.74015 2,514 Downloads 5,041 Views Citations
This article belongs to the Special Issue on Composite Interface and Damages
Properties of Recycled-Polyethylene Terephthalate/Polycarbonate Blend Fabricated by Vented Barrel Injection Molding (Articles)

Wiranphat Thodsaratpreeyakul, Putinun Uawongsuwan, Takanori Negoro

Materials Sciences and Applications Vol.9 No.1, January 26, 2018

DOI: 10.4236/msa.2018.91012 1,807 Downloads 5,347 Views Citations
Parameter Prediction of Stretch-Blow Molding Process of PET Using Neural Networks (Articles)

Talal H. Alzanki, Mutaz M. Jafar

Journal of Software Engineering and Applications Vol.12 No.7, July 31, 2019

DOI: 10.4236/jsea.2019.127017 2,375 Downloads 10,772 Views Citations
Influence of Initial Value of Transient Time Step on Numerical Simulation of Blow Molding Balloon (Articles)

Jinyao Bian, Guobao Jin, Peng Qin, Guanghui Dai

American Journal of Computational Mathematics Vol.10 No.2, June 23, 2020

DOI: 10.4236/ajcm.2020.102014 735 Downloads 1,713 Views Citations
Fabrication and Characterization on Physico-Mechanical and Structural Properties of Sawdust Reinforced Acrylonitrile Butadiene Styrene (ABS) Composites (Articles)

Budrun Neher, Nabila Tasnim Nova, Rakib Hossain, M. A. Gafur, Farid Ahmed

Materials Sciences and Applications Vol.11 No.9, September 22, 2020

DOI: 10.4236/msa.2020.119043 1,232 Downloads 2,931 Views Citations
Comparison of DOE Programs (Articles)

Mani Bharadwaj Tirupathi, Yousuf Pasha Shaik, Jens Schuster

Open Access Library Journal Vol.11 No.3, March 29, 2024

DOI: 10.4236/oalib.1111200 143 Downloads 1,168 Views Citations
Non-Darcy Flow in Molding Sands (Articles)

Miguel A. Barron-Meza, Joan Reyes-Miranda, Daniel Flores-Sanchez

Open Journal of Applied Sciences Vol.14 No.4, April 18, 2024

DOI: 10.4236/ojapps.2024.144064 194 Downloads 745 Views Citations
High Efficiency PGM Setup Cycle of Photovoltaic Components via Numerical Simulation (Articles)

Gabriela Kehlerová, Marcel Horák, Ivo Matoušek

Materials Sciences and Applications Vol.16 No.5, May 29, 2025

DOI: 10.4236/msa.2025.165017 107 Downloads 393 Views Citations
Design of Rubber Injection Molding Mold for Windshield in High-Speed EMU (Articles)

Jihong Zuo, Lei Wang, Yi Liu, Gaoxiang Rong

World Journal of Engineering and Technology Vol.13 No.3, August 26, 2025

DOI: 10.4236/wjet.2025.133044 173 Downloads 737 Views Citations
Exploring Bamboo Fiber Reinforced Acrylonitrile Butadiene Styrene (ABS) Polymer Composite by Characterization of Physical, Mechanical and Structural Properties (Articles)

Rabeya Akter, Md Rashedul Islam, Budrun Neher, Md Abdul Gafur, Farid Ahmed

Materials Sciences and Applications Vol.16 No.9, September 3, 2025

DOI: 10.4236/msa.2025.169027 89 Downloads 689 Views Citations
Effects of Ultrasonic Waves during Resin Impregnation on the Mechanical Properties of Unidirectional Composite Materials (Articles)

Yasunari Kuratani, Aya Miki, Norimichi Nanami, Hayato Nakatani, Hiroyuki Hamada

Open Journal of Composite Materials Vol.8 No.1, December 18, 2017

DOI: 10.4236/ojcm.2018.81001 1,323 Downloads 2,920 Views Citations
Development of Eco-Friendly Composite Material for Pinewood Replacement Using Agricultural Waste (Articles)

Praveen Kumar Tammali, Jens Schuster, Yousuf Pasha Shaik

Open Access Library Journal Vol.11 No.12, December 11, 2024

DOI: 10.4236/oalib.1112619 119 Downloads 969 Views Citations
Algorithmic Methods for Concave Optimization Problems (Articles)

Xu Zhang, Xue Tian, Chen Wang, Tao Li

American Journal of Industrial and Business Management Vol.7 No.7, July 19, 2017

DOI: 10.4236/ajibm.2017.77067 1,280 Downloads 2,625 Views Citations
Knowledge and practice of periodic abstinence among women in India (Articles)

Begum Shahina, Dwivedi Sada Nand, Mittal Suneeta, Pandey Arvind

Open Journal of Preventive Medicine Vol.3 No.4, June 26, 2013

DOI: 10.4236/ojpm.2013.34045 5,291 Downloads 7,655 Views Citations
A Comparative Study of Two Spatial Discretization Schemes for Advection Equation (Articles)

Huda O. Bakodah

International Journal of Modern Nonlinear Theory and Application Vol.5 No.1, March 8, 2016

DOI: 10.4236/ijmnta.2016.51006 3,141 Downloads 5,030 Views Citations

First <123 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies