Molding Technique - Articles - Scientific Research Publishing

The Relationship between Bulk Property and Property Distribution in Thin-Wall Injection Molded PP at Different Molecular Weight and Molecular Weight Distribution (Articles)

Keisuke Maeda, Koji Yamada, Kazushi Yamada, Masaya Kotaki, Hiroyuki Nishimura

Advances in Materials Physics and Chemistry Vol.6 No.1, January 19, 2016

DOI: 10.4236/ampc.2016.61001 4,568 Downloads 5,882 Views Citations
A Novel Statistical Analysis for Residual Stress in Injection Molding (Articles)

Faisal Alkaabneh, Mahmoud Barghash, Yousef Abdullat

American Journal of Operations Research Vol.6 No.1, January 29, 2016

DOI: 10.4236/ajor.2016.61012 4,668 Downloads 6,722 Views Citations
Prediction of the Enhanced Out-of-Plane Thermal Conductivity of Carbon Fiber Composites Produced by VARTM (Articles)

Jens Schuster, Martin Schütz, Johannes Lutz, Laura Lempert

Open Journal of Composite Materials Vol.6 No.4, September 19, 2016

DOI: 10.4236/ojcm.2016.64010 2,007 Downloads 3,585 Views Citations
The Influence of Molding Density of TiO₂ Varistor-Ceramic on Densification of Ceramic Body and Grain Growth (Articles)

Yu Wang, Kemin Zhang, Wenge Li, Weihua Yao, Jinxin Ma, Xiaolin Zhang

Journal of Minerals and Materials Characterization and Engineering Vol.4 No.6, November 29, 2016

DOI: 10.4236/jmmce.2016.46031 1,371 Downloads 2,362 Views Citations
The Determination of Interfacial Shear Strength in Short Fiber Reinforced Poly Ethylene Terephthalate by Kelly-Tyson Theory (Articles)

Wiranphat Thodsaratpreeyakul, Putinun Uawongsuwan, Akio Kataoka, Takanori Negoro, Hiroyuki Hamada

Open Journal of Composite Materials Vol.7 No.4, July 27, 2017

DOI: 10.4236/ojcm.2017.74015 2,470 Downloads 4,926 Views Citations
This article belongs to the Special Issue on Composite Interface and Damages
Properties of Recycled-Polyethylene Terephthalate/Polycarbonate Blend Fabricated by Vented Barrel Injection Molding (Articles)

Wiranphat Thodsaratpreeyakul, Putinun Uawongsuwan, Takanori Negoro

Materials Sciences and Applications Vol.9 No.1, January 26, 2018

DOI: 10.4236/msa.2018.91012 1,768 Downloads 5,236 Views Citations
Parameter Prediction of Stretch-Blow Molding Process of PET Using Neural Networks (Articles)

Talal H. Alzanki, Mutaz M. Jafar

Journal of Software Engineering and Applications Vol.12 No.7, July 31, 2019

DOI: 10.4236/jsea.2019.127017 2,344 Downloads 10,626 Views Citations
Influence of Initial Value of Transient Time Step on Numerical Simulation of Blow Molding Balloon (Articles)

Jinyao Bian, Guobao Jin, Peng Qin, Guanghui Dai

American Journal of Computational Mathematics Vol.10 No.2, June 23, 2020

DOI: 10.4236/ajcm.2020.102014 701 Downloads 1,654 Views Citations
Fabrication and Characterization on Physico-Mechanical and Structural Properties of Sawdust Reinforced Acrylonitrile Butadiene Styrene (ABS) Composites (Articles)

Budrun Neher, Nabila Tasnim Nova, Rakib Hossain, M. A. Gafur, Farid Ahmed

Materials Sciences and Applications Vol.11 No.9, September 22, 2020

DOI: 10.4236/msa.2020.119043 1,210 Downloads 2,853 Views Citations
Comparison of DOE Programs (Articles)

Mani Bharadwaj Tirupathi, Yousuf Pasha Shaik, Jens Schuster

Open Access Library Journal Vol.11 No.3, March 29, 2024

DOI: 10.4236/oalib.1111200 138 Downloads 1,104 Views Citations
Non-Darcy Flow in Molding Sands (Articles)

Miguel A. Barron-Meza, Joan Reyes-Miranda, Daniel Flores-Sanchez

Open Journal of Applied Sciences Vol.14 No.4, April 18, 2024

DOI: 10.4236/ojapps.2024.144064 183 Downloads 706 Views Citations
High Efficiency PGM Setup Cycle of Photovoltaic Components via Numerical Simulation (Articles)

Gabriela Kehlerová, Marcel Horák, Ivo Matoušek

Materials Sciences and Applications Vol.16 No.5, May 29, 2025

DOI: 10.4236/msa.2025.165017 84 Downloads 350 Views Citations
Design of Rubber Injection Molding Mold for Windshield in High-Speed EMU (Articles)

Jihong Zuo, Lei Wang, Yi Liu, Gaoxiang Rong

World Journal of Engineering and Technology Vol.13 No.3, August 26, 2025

DOI: 10.4236/wjet.2025.133044 154 Downloads 681 Views Citations
Exploring Bamboo Fiber Reinforced Acrylonitrile Butadiene Styrene (ABS) Polymer Composite by Characterization of Physical, Mechanical and Structural Properties (Articles)

Rabeya Akter, Md Rashedul Islam, Budrun Neher, Md Abdul Gafur, Farid Ahmed

Materials Sciences and Applications Vol.16 No.9, September 3, 2025

DOI: 10.4236/msa.2025.169027 82 Downloads 609 Views Citations
Solving Nonlinear Stochastic Diffusion Models with Nonlinear Losses Using the Homotopy Analysis Method (Articles)

Aisha A. Fareed, Hanafy H. El-Zoheiry, Magdy A. El-Tawil, Mohammed A. El-Beltagy, Hany N. Hassan

Applied Mathematics Vol.5 No.1, January 10, 2014

DOI: 10.4236/am.2014.51014 4,705 Downloads 7,013 Views Citations
Kicks Controlling Techniques Efficiency in Term of Time (Articles)

Ali K. Darwesh, Thorkild Maack Rasmussen, Nadhir Al-Ansari

Engineering Vol.9 No.5, May 27, 2017

DOI: 10.4236/eng.2017.95028 2,523 Downloads 6,142 Views Citations
Internal Lateral Sphincterotomy in Yaounde: Comparative Short-Term Results of Open versus Closed Techniques (Articles)

Georges Bwelle Motto, Yannick Mahamat Ekani Boukar, Guy Aristide Bang, Joseph Cyrille Chopkeng Ngoumfe, Fabrice Tientcheu Tim, Arthur Essomba, Maurice Aurélien Sosso

Surgical Science Vol.12 No.11, November 29, 2021

DOI: 10.4236/ss.2021.1211039 267 Downloads 1,416 Views Citations
The Onset of Buoyancy and Surface Tension Driven Convection in a Ferrofluid Layer by Influence of General Boundary Conditions (Articles)

Mahesh Kumar Ramachandraiah, Savitha Basavaraju

Open Journal of Fluid Dynamics Vol.12 No.1, March 2, 2022

DOI: 10.4236/ojfd.2022.121003 302 Downloads 925 Views Citations
Arthroscopic Surgery of the Elbow; Indications, Contra-Indications, Complications and Operative Technique (Articles)

Frank Theodoor Gabriel Rahusen, Orthopedic Surgeon, Denise Eygendaal

Surgical Science Vol.2 No.5, July 29, 2011

DOI: 10.4236/ss.2011.25049 6,171 Downloads 10,898 Views Citations
Depression and Insulin Resistance in Non-Diabetic Subjects: An Intervention Study with Insulin Clamp Technique (Articles)

Shaheen Asghar, A. Magnusson, Akhtar Hussain, Lien M. Diep, Bishwajit Bhowmik, Per M. Thorsby

International Journal of Clinical Medicine Vol.3 No.7, December 21, 2012

DOI: 10.4236/ijcm.2012.37104 5,137 Downloads 7,759 Views Citations

First <123 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies