Laser Surface Hardening Process - Articles - Scientific Research Publishing

Simulation of Thermophysical Processes at Laser Welding of Alloys Containing Refractory Nanoparticles (Articles)

Anatoly N. Cherepanov, Vasily P. Shapeev, Guangxun Liu, Lamei Cao

Advances in Materials Physics and Chemistry Vol.2 No.4B, October 10, 2013

DOI: 10.4236/ampc.2012.24B069 6,150 Downloads 7,917 Views Citations
Thermal response and optical absorptance of metals under femtosecond laser irradiation (Articles)

Anatoliy Y Vorobyev, Chunlei Guo

Natural Science Vol.3 No.6, June 22, 2011

DOI: 10.4236/ns.2011.36068 6,672 Downloads 13,463 Views Citations
Optimization of Bead Geometry in CO₂ Laser Welding of Ti 6Al 4V Using Response Surface Methodology (Articles)

Ali Khorram, Majid Ghoreishi, Mohammad Reza Soleymani Yazdi, Mahmood Moradi

Engineering Vol.3 No.7, July 20, 2011

DOI: 10.4236/eng.2011.37084 6,581 Downloads 12,169 Views Citations
Effect of Pulsed Laser on the Structure and Morphology of Alumina-Zirconia Coatings (Articles)

Hala Omar, Ahmed Ibrahim, Hanadi Salem, Sherif Sedky

Journal of Surface Engineered Materials and Advanced Technology Vol.3 No.3, July 12, 2013

DOI: 10.4236/jsemat.2013.33033 5,118 Downloads 7,901 Views Citations
An Economic Phase-Mdulation to Intensity-Modulation Converter (Articles)

Ching-Hung Chang, Jui-Hsuan Chang, Yin-Liang Liao, Meng Chun Tseng

Journal of Computer and Communications Vol.1 No.7, November 29, 2013

DOI: 10.4236/jcc.2013.17008 3,435 Downloads 5,593 Views Citations
Surface Roughness Modification of Free Standing Single Crystal Silicon Microstructures Using KrF Excimer Laser Treatment for Mechanical Performance Improvement (Articles)

Mohamed Elwi Mitwally, Toshiyuki Tsuchiya, Osamu Tabata, Sherif Sedky

Journal of Surface Engineered Materials and Advanced Technology Vol.5 No.1, January 6, 2015

DOI: 10.4236/jsemat.2015.51004 3,742 Downloads 5,063 Views Citations
This article belongs to the Special Issue on Surface and Interface of Materials
Surface Analysis Correlated with Structural and Mechanical Properties of Laser Irradiated Brass (Articles)

Shahbaz Ahmad, Shazia Bashir, Daniel Yousaf, Nisar Ali, Tousif Hussain

Materials Sciences and Applications Vol.6 No.1, January 13, 2015

DOI: 10.4236/msa.2015.61004 3,510 Downloads 4,866 Views Citations
Effects of Laser Pulse Numbers on Surface Biocompatibility of Titanium for Implant Fabrication (Articles)

Mitra Radmanesh, Amirkianoosh Kiani

Journal of Biomaterials and Nanobiotechnology Vol.6 No.3, July 9, 2015

DOI: 10.4236/jbnb.2015.63017 5,629 Downloads 7,237 Views Citations
Laser-Based Guided Wave Propagation and Mode Decomposition in Detecting the Integrity of Structural I-Beams (Articles)

Peter Tse, Faeez Masurkar

Journal of Computer and Communications Vol.6 No.1, December 29, 2017

DOI: 10.4236/jcc.2018.61005 1,059 Downloads 2,172 Views Citations
Effect of Laser Texturing Parameters on Wettability of Nickel Surface (Articles)

Junyuan Huang, Songbo Wei, Lixin Zhang, Yingying Yang, Song Yang, Zejun Shen

Journal of Materials Science and Chemical Engineering Vol.6 No.7, July 31, 2018

DOI: 10.4236/msce.2018.67017 1,197 Downloads 3,142 Views Citations
Laser Polishing of Laser Powder Bed Fusion AlSi10Mg Parts—Influence of Initial Surface Roughness on Achievable Surface Quality (Articles)

Markus Hofele, Andre Roth, Jochen Schanz, David K. Harrison, Anjali K. M. De Silva, Harald Riegel

Materials Sciences and Applications Vol.12 No.1, January 20, 2021

DOI: 10.4236/msa.2021.121002 1,286 Downloads 3,824 Views Citations
This article belongs to the Special Issue on Material Surface Engineering
Nonlinear Ionization of Molecules by Intense Transform-Limited Gaussian Laser Pulses (Articles)

Samira Barmaki, Salima Hennani, Marc-André Albert, Stéphane Laulan

Optics and Photonics Journal Vol.4 No.11, November 24, 2014

DOI: 10.4236/opj.2014.411031 3,362 Downloads 4,553 Views Citations
Thermal Analysis of Laser Chemical Machining: Part I: Static Irradiation (Articles)

Hamza Messaoudi, Sandro Eckert, Frank Vollertsen

Materials Sciences and Applications Vol.8 No.10, September 5, 2017

DOI: 10.4236/msa.2017.810049 1,165 Downloads 2,895 Views Citations
Process Window Expansion of Laser Chemical Machining by Using High Pressure (Articles)

Marcel Simons, Tim Radel, Frank Vollertsen

Materials Sciences and Applications Vol.11 No.5, May 8, 2020

DOI: 10.4236/msa.2020.115020 532 Downloads 1,448 Views Citations
Continuous Wave Diode Laser Surface Texturing of Austenitic and Pearlitic Steels (Articles)

Sulthan Mohiddin Shariff, Suresh Koppoju, Tapan Kumar Pal, Padmanabham Gadhe, Shrikant Viswanath Joshi

Materials Sciences and Applications Vol.6 No.10, October 27, 2015

DOI: 10.4236/msa.2015.610091 3,054 Downloads 4,452 Views Citations
Analysis of the Manufactured Tolerances with the Three-Dimensional Method of Angular Chains of Dimensions Applied to a Cylinder Head of Car Engine (Articles)

Aida Mezghani, Alain Bellacicco, Jamel Louati, Alain Rivière, Mohamed Haddar

Engineering Vol.2 No.10, November 29, 2010

DOI: 10.4236/eng.2010.210099 5,685 Downloads 9,935 Views Citations
Surface Modification of NaCl Particles with Metal Films Using the Polygonal Barrel-Sputtering Method (Articles)

Satoshi Akamaru, Mitsuhiro Inoue, Takayuki Abe

Materials Sciences and Applications Vol.4 No.7B, July 18, 2013

DOI: 10.4236/msa.2013.47A2005 4,580 Downloads 6,910 Views Citations
This article belongs to the Special Issue on Surface Modification Technology and Research
Alternative Paradigm for Language Acquisition (Articles)

Solehah Yaacob, Rozina Abdul Ghani, Radwa Abu Bakar, Akmal Khuzairi Abdul Rahman, Taufik Ismail, Zalika Adam

Open Journal of Modern Linguistics Vol.4 No.3, August 28, 2014

DOI: 10.4236/ojml.2014.43038 4,067 Downloads 5,654 Views Citations
Optimization of the Degradation of Hydroquinone, Resorcinol and Catechol Using Response Surface Methodology (Articles)

Noureddine Elboughdiri, Ammar Mahjoubi, Ali Shawabkeh, Hussam Elddin Khasawneh, Bassem Jamoussi

Advances in Chemical Engineering and Science Vol.5 No.2, March 4, 2015

DOI: 10.4236/aces.2015.52012 3,890 Downloads 6,226 Views Citations
Optimization of Biodiesel Production from African Crude Palm Oil (Elaeis guineensis Jacq) with High Concentration of Free Fatty Acids by a Two-Step Transesterification Process (Articles)

Francisco Anguebes-Franseschi, Atl Córdova-Quiroz, Julia Cerón-Bretón, Claudia Aguilar-Ucan, Gloria Castillo-Martínez, Rosa Cerón-Bretón, Alejandro Ruíz-Marín, Carlos Montalvo-Romero

Open Journal of Ecology Vol.6 No.1, January 14, 2016

DOI: 10.4236/oje.2016.61002 4,744 Downloads 7,757 Views Citations
This article belongs to the Special Issue on Recent Advances on Environmental Monitoring, Modeling and Engineering

First <123 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies