LM6-SiC MMC; Hardness; Microstructure; Forging; FEM - Articles

Characterization of Nickel Alloy 600 with Ultra-Fine Structure Processed by Severe Plastic Deformation Technique (SPD) (Articles)

Waldemar Alfredo Monteiro, Silvio Luis Ventavele da Silva, Luciana Ventavele da Silva, Arnaldo Homobono Paes de Andrade, Luis Carlos Elias da Silva

Journal of Materials Science and Chemical Engineering Vol.5 No.4, April 30, 2017

DOI: 10.4236/msce.2017.54004 1,485 Downloads 3,145 Views Citations
Scanning Electron Microscopy (SEM) Analysis and Hardness of Diffusion Bonded Titanium-Titanium and Titanium-Copper Plates with Static Force and without Interlayers (Articles)

Joel Hemanth

Open Journal of Composite Materials Vol.7 No.2, April 30, 2017

DOI: 10.4236/ojcm.2017.72007 1,545 Downloads 3,997 Views Citations
Influence of Si and Ge Microalloying Additions and Plastic Deformation on Precipitation Processes in Al-Cu Based Alloys (Articles)

Maria Victoria Castro Riglos, Alfredo Tolley

Journal of Minerals and Materials Characterization and Engineering Vol.6 No.3, May 17, 2018

DOI: 10.4236/jmmce.2018.63025 924 Downloads 2,162 Views Citations
Fatigue Performance of Heat Treated TC21 Ti-Alloy (Articles)

Ramadan N. Elshaer, Khaled M. Ibrahim, Azza F. Barakat, Reham R. Abbas

Open Journal of Metal Vol.9 No.2, June 30, 2019

DOI: 10.4236/ojmetal.2019.92002 814 Downloads 3,182 Views Citations
The Microstructure and Properties of Copper with Ceria Nanoparticles Addition (Articles)

Daniela Passarelo Moura da Fonseca, Waldemar Alfredo Monteiro

Journal of Materials Science and Chemical Engineering Vol.7 No.10, October 22, 2019

DOI: 10.4236/msce.2019.710004 612 Downloads 1,906 Views Citations
Influence of Plastic Deformation and Aging Process on Microstructure and Tensile Properties of Cast Ti-6Al-2Sn-2Zr-2Mo-1.5Cr-2Nb-0.1Si Alloy (Articles)

Mostafa S. S. El-Deeb, Khaled M. Ibrahim, S. S. Mohamed, Ramadan N. Elshaer

Open Journal of Metal Vol.11 No.2, June 17, 2021

DOI: 10.4236/ojmetal.2021.112002 417 Downloads 1,377 Views Citations
Effect of Laser Cladding Processing Parameters on Nitinol’s Clad Dimensions, Microstructure, and Hardness (Articles)

Engy M. Zain, Ahmed Farid Youssef, Ahmad El Sabbagh, Sisa Pityana, Mohamed A. Taha

Materials Sciences and Applications Vol.12 No.12, December 24, 2021

DOI: 10.4236/msa.2021.1212040 378 Downloads 1,456 Views Citations
Numerical Simulation and Analysis of Heat Treatment Processes on AISI 1025 Steel Produced by Laser Engineered Net Shaping (Articles)

Elphas Tum, Rehema Ndeda, James Mutua, Raghupatruni Prasad, Eyitao Olakanmi, Sisa Pityana

Modeling and Numerical Simulation of Material Science Vol.15 No.1, November 14, 2024

DOI: 10.4236/mnsms.2025.151001 159 Downloads 1,081 Views Citations
Study on Weld Quality Characteristics of Pulsed Current Micro Plasma Arc Welding of Inconel625 Sheets (Articles)

K. Siva Prasad, Ch.Srinivasa Rao, D.Nageswara Rao

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.2, February 20, 2012

DOI: 10.4236/jmmce.2012.112010 8,251 Downloads 10,851 Views Citations
Microstructure, Mechanical Properties, Toughness, Wear Characteristics and Fracture Phenomena of Austenitised and Austempered Low-Alloyed Ductile Iron (Articles)

Nabil Fatahalla, Osama Hussein

Open Access Library Journal Vol.2 No.1, January 30, 2015

DOI: 10.4236/oalib.1101012 2,233 Downloads 4,763 Views Citations
Effect of Cu-Ni and Cu-Ni-Mn on the Microstructural and Mechanical Behaviour of As-Cast Non-Inoculated Hypereutectic Grey Iron (Articles)

Seidu Ojo, Adama Sumaila, Onigbajumo Adetunji

Journal of Minerals and Materials Characterization and Engineering Vol.8 No.2, March 20, 2020

DOI: 10.4236/jmmce.2020.82003 782 Downloads 3,186 Views Citations
Electrochemical Corrosion Study in H₂SO₄ of NiAl with Cu Additions, Microstructure and Micro-Hardness at Room Temperature (Articles)

Jesús M. Colín de la Cruz, Sergio A. Serna Barquera, Alvaro Torres-Islas, Arturo Molina-Ocampo, Edgar Valenzuela, José G. González Rodríguez

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.3, April 22, 2022

DOI: 10.4236/jmmce.2022.103018 333 Downloads 1,188 Views Citations
Minimization of Stock Weight during Close-Die Forging of a Spindle (Articles)

Hamzah Ssemakula

Materials Sciences and Applications Vol.4 No.4, April 29, 2013

DOI: 10.4236/msa.2013.44026 4,152 Downloads 6,279 Views Citations
Research on Combined Hot Extrusion Forming Process of Alternator Poles (Articles)

Cheng Yang, Shengdun Zhao

Journal of Materials Science and Chemical Engineering Vol.1 No.5, November 7, 2013

DOI: 10.4236/msce.2013.15004 6,614 Downloads 9,872 Views Citations
Effect of Titanium Addition on Behavior of Medium Carbon Steel (Articles)

Hoda S. El-Faramawy, Saeed N. Ghali, Mamdouh M. Eissa

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.11, November 30, 2012

DOI: 10.4236/jmmce.2012.1111118 9,826 Downloads 12,667 Views Citations
Development and Characterization of Carbon Nanotube Reinforced Aluminium-6061 Metal Matrix Composites (Articles)

Preethi. K, Raju T.N, Shivappa H.A

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.3, May 27, 2021

DOI: 10.4236/jmmce.2021.93020 520 Downloads 2,452 Views Citations
Studies on Al6061-SiC and Al7075-Al₂O₃ Metal Matrix Composites (Articles)

G. B. Veeresh Kumar, C. S. P. Rao, N. Selvaraj, M. S. Bhagyashekar

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.1, January 20, 2010

DOI: 10.4236/jmmce.2010.91004 15,135 Downloads 28,168 Views Citations
Development of Iron Based Brake Friction Material by Hot Powder Preform Forging Technique used for Medium to Heavy Duty Applications (Articles)

Mohammad Asif, K. Chandra, P.S. Misra

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.3, March 5, 2011

DOI: 10.4236/jmmce.2011.103015 9,571 Downloads 13,091 Views Citations
Effect of Chromium on Magnetic Characteristics of Powder Processed Fe-0.35wt%P Alloy (Articles)

Deepika Sharma, Kamlesh Chandra, Prabhu Shankar Misra

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.7, June 6, 2011

DOI: 10.4236/jmmce.2011.107047 5,776 Downloads 7,598 Views Citations
Development and Characterization of Fe-Based Friction Material Made by Hot Powder Preform Forging for Low Duty Applications (Articles)

A.A.S. Ghazi, K. Chandra, P.S. Misra

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.13, November 1, 2011

DOI: 10.4236/jmmce.2011.1013093 5,796 Downloads 7,482 Views Citations

First <123 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies