High Hardness - Articles - Scientific Research Publishing

Correlation between Process Variables in Shielded Metal-Arc Welding (SMAW) Process and Post Weld Heat Treatment (PWHT) on Some Mechanical Properties of Low Carbon Steel Welds (Articles)

J. O. Olawale, S. A. Ibitoye, K.M. Oluwasegun, M. D. Shittu, R. C. Ofoezie

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.9, September 25, 2012

DOI: 10.4236/jmmce.2012.119084 8,898 Downloads 13,097 Views Citations
Correlation between Hardness, Structure and Electrochemical Performance of an AlZnMnMg Alloy (Articles)

S. Valdez, B. Campillo, J. J. Islas

Engineering Vol.4 No.9, September 28, 2012

DOI: 10.4236/eng.2012.49075 9,603 Downloads 12,638 Views Citations
FEM Simulation and Experimental Validation of Cold Forging Behavior of LM6 Base Metal Matrix Composites (Articles)

Hillol Joardar, Goutam Sutradhar, Nitai Sundar Das

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.10, October 31, 2012

DOI: 10.4236/jmmce.2012.1110100 6,151 Downloads 8,213 Views Citations
Effect of Soaking Temperature on Physical and Functional Properties of Parboiled Rice Cultivars Grown in Temperate Region of India (Articles)

Shabir Ahmad Mir, Sowriappan John Don Bosco

Food and Nutrition Sciences Vol.4 No.3, March 19, 2013

DOI: 10.4236/fns.2013.43038 7,668 Downloads 12,827 Views Citations
Effect of Silicon Additions on the Wear Properties of Grey Cast Iron (Articles)

Johnson O. Agunsoye, Talabi S. Isaac, Olumuyiwa I. Awe, Afemefuna T. Onwuegbuzie

Journal of Minerals and Materials Characterization and Engineering Vol.1 No.2, March 29, 2013

DOI: 10.4236/jmmce.2013.12012 9,190 Downloads 14,110 Views Citations
Optimizing the Properties of Polyether Based Polyurethane Foam (Articles)

F. O. Aramide, P. O. Atanda, E. O. Olorunniwo

Open Journal of Polymer Chemistry Vol.3 No.4, September 17, 2013

DOI: 10.4236/ojpchem.2013.34015 8,561 Downloads 13,412 Views Citations
Estimation of the Yield Stress of Stainless Steel from the Vickers Hardness Taking Account of the Residual Stress (Articles)

Osamu Takakuwa, Yusuke Kawaragi, Hitoshi Soyama

Journal of Surface Engineered Materials and Advanced Technology Vol.3 No.4, October 8, 2013

DOI: 10.4236/jsemat.2013.34035 10,850 Downloads 16,369 Views Citations
Comparative Study of the Impact of Corundum Particle Contaminants Size on Wear and Fatigue Life of Grease Lubricated Ball Bearings (Articles)

D. Koulocheris, A. Stathis, Th. Costopoulos, G. Gyparakis

Modern Mechanical Engineering Vol.3 No.4, November 5, 2013

DOI: 10.4236/mme.2013.34023 9,781 Downloads 29,646 Views Citations
Effect of Diode Laser 810nm in Hardness of Dental Ceramic (Articles)

Mubarak M. Ahmed, Abdelaziz Hagar Abdelrahman, Elhadi Mohieldin, Samia Omer Yagoub

Optics and Photonics Journal Vol.4 No.5, May 30, 2014

DOI: 10.4236/opj.2014.45011 3,856 Downloads 5,504 Views Citations
Effect of Shakeout Time on Microstructure and Hardness Properties of Grey Cast Iron (Articles)

Saliu Ojo Seidu, Daniel Toyin Oloruntoba, Iyiola Olatunji Otunniyi

Journal of Minerals and Materials Characterization and Engineering Vol.2 No.4, July 30, 2014

DOI: 10.4236/jmmce.2014.24039 4,082 Downloads 5,524 Views Citations
A Study of Porosity Effect on Tribological Behavior of Cast Al A380M and Sintered Al 6061 Alloys (Articles)

Avijit Sinha, Zoheir Farhat

Journal of Surface Engineered Materials and Advanced Technology Vol.5 No.1, December 26, 2014

DOI: 10.4236/jsemat.2015.51001 6,037 Downloads 8,061 Views Citations
This article belongs to the Special Issue on Surface and Interface of Materials
Influence of Wettability and Mechanical Properties on Tribological Performance of DLC Coatings under Water Lubrication (Articles)

Chaoqun Zhang, Masahiro Fujii

Journal of Surface Engineered Materials and Advanced Technology Vol.5 No.3, June 8, 2015

DOI: 10.4236/jsemat.2015.53013 4,954 Downloads 7,254 Views Citations
The Effects of Sintering Temperature on the Densification of Mechanically Alloyed W-Brass Composites (Articles)

Baba Gowon, Kahtan S. Mohammed, Shamsul Baharin Bin Jamaluddin, Zuhailawati Hussain, Polycarp Evarastics

Open Journal of Metal Vol.5 No.3, August 20, 2015

DOI: 10.4236/ojmetal.2015.53003 3,859 Downloads 5,523 Views Citations
Synthesis and Densification of Tungsten-Brass Composite by Mechanical Alloying (Articles)

Kahtan S. Mohammed, Baba Gowon, Shamsul Baharin Bin Jamaluddin, Zuhailawati Hussain, Polycarp Evarastics

Open Journal of Metal Vol.5 No.3, September 1, 2015

DOI: 10.4236/ojmetal.2015.53004 4,176 Downloads 5,535 Views Citations
Comparative Study on Conventional Sintering with Microwave Sintering and Vacuum Sintering of Y₂O₃-Al₂O₃-ZrO₂ Ceramics (Articles)

Mayur Shukla, Sumana Ghosh, Nandadulal Dandapat, Ashis K. Mandal, Vamsi K. Balla

Journal of Materials Science and Chemical Engineering Vol.4 No.2, February 17, 2016

DOI: 10.4236/msce.2016.42008 4,765 Downloads 7,432 Views Citations
A Comparative Physiochemical Properties of Esomeprazole Brands (Articles)

Safila Naveed, Fatima Qamar

Open Access Library Journal Vol.1 No.6, September 15, 2014

DOI: 10.4236/oalib.1100614 1,804 Downloads 2,866 Views Citations
Concrete Compressive Strength Estimation by Means of Nondestructive Testing: A Case Study (Articles)

Yuri Danilo Lopes, Leandro Vanalli, Vladimir José Ferrari

Open Journal of Civil Engineering Vol.6 No.4, September 2, 2016

DOI: 10.4236/ojce.2016.64043 3,578 Downloads 7,819 Views Citations
Metallurgical Analysis of Brake Blocks (Articles)

Mathioro Fall, Fadel Niang, Olivier Hubert, Mamadou Babacar Ndiaye

Open Journal of Metal Vol.7 No.1, March 29, 2017

DOI: 10.4236/ojmetal.2017.71001 1,634 Downloads 3,162 Views Citations
The Effect of Detergents on the Appearance of Automotive Clearcoat Systems Studied in an Outdoor Weathering Test (Articles)

Mohammad S. Alsoufi, Tahani M. Bawazeer, Mohammed W. Alhazmi, Sufyan Azam

Materials Sciences and Applications Vol.8 No.7, July 3, 2017

DOI: 10.4236/msa.2017.87036 1,364 Downloads 4,376 Views Citations
Hydrodynamic Modelling, Thermodynamic and Textural Variations during Common Beans Soaking (Articles)

E. M. Kwofie, O. I. Mba, M. Ngadi

Advances in Chemical Engineering and Science Vol.9 No.1, January 4, 2019

DOI: 10.4236/aces.2019.91003 1,001 Downloads 2,184 Views Citations

First <123 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies