Drawn Steel; Recovery; Recrystallization; Microstructure; Hardness; Soaking Time - Articles

Experimental Research of Impact Toughness of the Kazakhstani Construction Steel— Assessment of Compliance with the Provisions of 1993 Eurocode (Articles)

Begman Kulbayev, Vladimir Lapin, Alexander Shakhnovich, Tursymbai Tuleyev, Serik Aldakhov, Yerken Aldakhov, Alimzhan Ali

Open Journal of Civil Engineering Vol.13 No.4, December 7, 2023

DOI: 10.4236/ojce.2023.134044 194 Downloads 742 Views Citations
Effect of Heat Treatments on Corrosion of Welded Low-Carbon Steel in Acid and Salt Environments (Articles)

Saliu Ojo Seidu, Bolarinwa Johnson Kutelu

Journal of Minerals and Materials Characterization and Engineering Vol.1 No.3, May 24, 2013

DOI: 10.4236/jmmce.2013.13018 5,000 Downloads 7,508 Views Citations
Investigation of Hot Deformation Behavior of SNCM8 Alloy Steel (Articles)

Naiyanut Jantepa, Surasak Suranuntchai

World Journal of Mechanics Vol.11 No.3, March 26, 2021

DOI: 10.4236/wjm.2021.113003 614 Downloads 1,849 Views Citations
Sigma Phase Formation and Embrittlement of Cast Iron-Chromium-Nickel (Fe-Cr-Ni) Alloys (Articles)

A. M. Babakr, A. Al-Ahmari, K. Al-Jumayiah, F. Habiby

Journal of Minerals and Materials Characterization and Engineering Vol.7 No.2, June 20, 2008

DOI: 10.4236/jmmce.2008.72011 15,876 Downloads 22,807 Views Citations
Microstructure and Mechanical Properties of Ceramic Composites (Articles)

V.S. Aigbodion, J. O. Agunsoye, V. Kalu, F. Asuke, S. Ola

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.6, June 20, 2010

DOI: 10.4236/jmmce.2010.96037 7,763 Downloads 11,023 Views Citations
Study of Microstructure and Mechanical Behavior of Aluminum/Garnet/Carbon Hybrid Metal Matrix Composites (HMMCs) Fabricated by Chill Casting Method (Articles)

M. G. Anantha Prasad, Nityanand Bandekar

Journal of Materials Science and Chemical Engineering Vol.3 No.3, March 12, 2015

DOI: 10.4236/msce.2015.33001 4,320 Downloads 6,281 Views Citations
Characterization of Nickel Alloy 600 with Ultra-Fine Structure Processed by Severe Plastic Deformation Technique (SPD) (Articles)

Waldemar Alfredo Monteiro, Silvio Luis Ventavele da Silva, Luciana Ventavele da Silva, Arnaldo Homobono Paes de Andrade, Luis Carlos Elias da Silva

Journal of Materials Science and Chemical Engineering Vol.5 No.4, April 30, 2017

DOI: 10.4236/msce.2017.54004 1,485 Downloads 3,145 Views Citations
Scanning Electron Microscopy (SEM) Analysis and Hardness of Diffusion Bonded Titanium-Titanium and Titanium-Copper Plates with Static Force and without Interlayers (Articles)

Joel Hemanth

Open Journal of Composite Materials Vol.7 No.2, April 30, 2017

DOI: 10.4236/ojcm.2017.72007 1,545 Downloads 3,997 Views Citations
Influence of Si and Ge Microalloying Additions and Plastic Deformation on Precipitation Processes in Al-Cu Based Alloys (Articles)

Maria Victoria Castro Riglos, Alfredo Tolley

Journal of Minerals and Materials Characterization and Engineering Vol.6 No.3, May 17, 2018

DOI: 10.4236/jmmce.2018.63025 924 Downloads 2,162 Views Citations
Fatigue Performance of Heat Treated TC21 Ti-Alloy (Articles)

Ramadan N. Elshaer, Khaled M. Ibrahim, Azza F. Barakat, Reham R. Abbas

Open Journal of Metal Vol.9 No.2, June 30, 2019

DOI: 10.4236/ojmetal.2019.92002 814 Downloads 3,182 Views Citations
The Microstructure and Properties of Copper with Ceria Nanoparticles Addition (Articles)

Daniela Passarelo Moura da Fonseca, Waldemar Alfredo Monteiro

Journal of Materials Science and Chemical Engineering Vol.7 No.10, October 22, 2019

DOI: 10.4236/msce.2019.710004 612 Downloads 1,906 Views Citations
Influence of Plastic Deformation and Aging Process on Microstructure and Tensile Properties of Cast Ti-6Al-2Sn-2Zr-2Mo-1.5Cr-2Nb-0.1Si Alloy (Articles)

Mostafa S. S. El-Deeb, Khaled M. Ibrahim, S. S. Mohamed, Ramadan N. Elshaer

Open Journal of Metal Vol.11 No.2, June 17, 2021

DOI: 10.4236/ojmetal.2021.112002 417 Downloads 1,377 Views Citations
Effect of Laser Cladding Processing Parameters on Nitinol’s Clad Dimensions, Microstructure, and Hardness (Articles)

Engy M. Zain, Ahmed Farid Youssef, Ahmad El Sabbagh, Sisa Pityana, Mohamed A. Taha

Materials Sciences and Applications Vol.12 No.12, December 24, 2021

DOI: 10.4236/msa.2021.1212040 378 Downloads 1,456 Views Citations
Numerical Simulation and Analysis of Heat Treatment Processes on AISI 1025 Steel Produced by Laser Engineered Net Shaping (Articles)

Elphas Tum, Rehema Ndeda, James Mutua, Raghupatruni Prasad, Eyitao Olakanmi, Sisa Pityana

Modeling and Numerical Simulation of Material Science Vol.15 No.1, November 14, 2024

DOI: 10.4236/mnsms.2025.151001 159 Downloads 1,081 Views Citations
Inhomogeneous Hardness Distribution of High Pressure Torsion Processed IF Steel Disks (Articles)

Yuepeng Song, Wenke Wang, Dongsheng Gao, Hyoung-Seop Kim, Eun-Yoo Yoon, Dong-Jun Lee, Chong-Soo Lee, Jing Guo

Materials Sciences and Applications Vol.3 No.4, April 18, 2012

DOI: 10.4236/msa.2012.34034 4,807 Downloads 7,869 Views Citations
Effects of Electrode Types on the Microstructure, Tensile and Hardness Properties of 304 L Austenitic Stainless Steel Heat-Affected Zone (HAZ) (Articles)

Bolarinwa Johnson Kutelu, Emmanuel Gbolade Adubi, Saliu Ojo Seidu

Journal of Minerals and Materials Characterization and Engineering Vol.6 No.5, August 31, 2018

DOI: 10.4236/jmmce.2018.65038 1,215 Downloads 2,929 Views Citations
Improvement in Surface Roughness and Hardness for Carbon Steel by Slide Burnishing Process (Articles)

Hirotaka Kato, Wataru Hirokawa, Yoshikazu Todaka, Kazufumi Yasunaga

Materials Sciences and Applications Vol.12 No.5, May 8, 2021

DOI: 10.4236/msa.2021.125011 1,391 Downloads 3,723 Views Citations
This article belongs to the Special Issue on Material Processing
Hydrogen Embrittlement of Nitrogenating Layer on Martensitic Alloys (Articles)

Daniel Moreno, Yohanan Nachmana, Shimon Bashan, Barak Weizman, Denis Panchenko, Michael Mansano, Elinor Itzhak, Moshe Shapira

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.5, September 8, 2023

DOI: 10.4236/jmmce.2023.115013 323 Downloads 1,516 Views Citations
Reducing toxic effect of seed-soaked Cu fertilizer on germination of wheat (Articles)

Sukhdev S. Malhi, D. Leach

Agricultural Sciences Vol.3 No.5, September 21, 2012

DOI: 10.4236/as.2012.35082 4,182 Downloads 7,020 Views Citations
Mechanical Characteristics of Superaustenitic Stainless Steel Type 30Cr25Ni32Mo3 at Elevated Temperatures (Articles)

Gholam Reza Ebrahimi, Hamid Keshmiri, Hadi Arabshahi

Materials Sciences and Applications Vol.1 No.6, December 29, 2010

DOI: 10.4236/msa.2010.16047 7,494 Downloads 13,408 Views Citations

First <123 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies