Additive Manufacturing Technology - Articles - Scientific Research Publishing

Effect of Laser Cladding Processing Parameters on Nitinol’s Clad Dimensions, Microstructure, and Hardness (Articles)

Engy M. Zain, Ahmed Farid Youssef, Ahmad El Sabbagh, Sisa Pityana, Mohamed A. Taha

Materials Sciences and Applications Vol.12 No.12, December 24, 2021

DOI: 10.4236/msa.2021.1212040 421 Downloads 1,536 Views Citations
Quantitative Simulation Study of Metal Additive Manufacturing by Kinetic Monte Carlo (Articles)

Kepeng Ouyang, Youdi Kuang

Journal of Applied Mathematics and Physics Vol.10 No.5, May 18, 2022

DOI: 10.4236/jamp.2022.105110 355 Downloads 1,480 Views Citations
Effect of Acetone Vapor Smoothing Process on Surface Finish and Geometric Accuracy of Fused Deposition Modeling ABS Parts (Articles)

Viviane Pestano, Mariana Pohlmann, Fabio Pinto da Silva

Journal of Materials Science and Chemical Engineering Vol.10 No.10, October 24, 2022

DOI: 10.4236/msce.2022.1010001 390 Downloads 2,416 Views Citations
Characterization and Modeling of Mechanical Properties of Additively Manufactured Coconut Fiber-Reinforced Polypropylene Composites (Articles)

George Mosi, Bernard W. Ikua, Samuel K. Kabini, James W. Mwangi

Advances in Materials Physics and Chemistry Vol.14 No.6, June 21, 2024

DOI: 10.4236/ampc.2024.146008 256 Downloads 1,597 Views Citations
High Temperature Mechanical Properties of Additive Manufacturing CoCr F75 Alloy (Articles)

Daniel Moreno, Yohanan Nachmana, Matan Zakai, Omer Hollander, Ishai Alon, Elinor Itzhak, Moshe Shapira

Journal of Minerals and Materials Characterization and Engineering Vol.13 No.2, February 28, 2025

DOI: 10.4236/jmmce.2025.132003 179 Downloads 1,271 Views Citations
Finite Element Modeling and Validation of Submerged Arc Welding for Repairing 136RE Heavy Rails (Articles)

Arman Ali Mohammadi, Zhiyong Wang, Hualiang Teng

Journal of Transportation Technologies Vol.16 No.1, December 22, 2025

DOI: 10.4236/jtts.2026.161005 51 Downloads 344 Views Citations
High-Temperature Stress-Strain Behavior and Fractographic Characterization of Additively Manufactured Inconel 939 (Articles)

Daniel Moreno, Matan Zakai, Yohanan Nahmana, Ariel Y. Cohen, Moshe Shapira

Journal of Minerals and Materials Characterization and Engineering Vol.14 No.3, April 8, 2026

DOI: 10.4236/jmmce.2026.143006 76 Downloads 375 Views Citations
Recycled, Bio-Based, and Blended Composite Materials for 3D Printing Filament: Pros and Cons—A Review (Articles)

Khanh Q. Nguyen, Pascal Y. Vuillaume, Lei Hu, Jorge López-Beceiro, Patrice Cousin, Saïd Elkoun, Mathieu Robert

Materials Sciences and Applications Vol.14 No.3, March 10, 2023

DOI: 10.4236/msa.2023.143010 1,163 Downloads 7,541 Views Citations
Characterization of 3D Printed Poly(3-Hydroxybutyric-Co-3-Hydroxyvalerate) by Fused Granular Fabrication through Thermal and Mechanical Analyses (Articles)

Lok-Ching Wu, Cheng-Hao Lee, Yanming Wang, Yaohui Liu, Chi-Wai Kan

Journal of Materials Science and Chemical Engineering Vol.11 No.12, December 29, 2023

DOI: 10.4236/msce.2023.1112006 270 Downloads 907 Views Citations
The Impact of AI Technology on the Green Development of Manufacturing Enterprises in Ghana (Articles)

Abangbila Linda, Xianmiao Li

Low Carbon Economy Vol.16 No.3, September 12, 2025

DOI: 10.4236/lce.2025.163005 97 Downloads 750 Views Citations
A Frontier Approach to Measuring Impact of Adoption of Flexible Manufacturing Technology on Technical Efficiency of Malaysian Manufacturing Industry (Articles)

Don Ajith Rohana Dolage, Abu Bakar Sade

Technology and Investment Vol.3 No.4, November 28, 2012

DOI: 10.4236/ti.2012.34037 4,596 Downloads 7,296 Views Citations
Design and Experimental Study of Vacuum Suction Grabbing Technology to Grasp Fabric Piece (Articles)

Ray Wai Man Kong, Mingyi Liu, Theodore Ho Tin Kong

Open Access Library Journal Vol.11 No.11, November 15, 2024

DOI: 10.4236/oalib.1112292 85 Downloads 970 Views Citations
Effect of Melt Scan Rate on Microstructure and Macrostructure for Electron Beam Melting of Ti-6Al-4V (Articles)

Karina Puebla, Lawrence E. Murr, Sara M. Gaytan, Edwin Martinez, Francisco Medina, Ryan B. Wicker

Materials Sciences and Applications Vol.3 No.5, May 22, 2012

DOI: 10.4236/msa.2012.35038 8,266 Downloads 13,271 Views Citations
Computer-Aided Design and Fabrication of Finger Prosthesis (Articles)

Takeshi Murayama, Kosei Oono, Mitsunori Tada, Toru Eguchi, Misuzu Nagami, Mitsuhiro Tamamoto

Journal of Biomedical Science and Engineering Vol.8 No.2, February 15, 2015

DOI: 10.4236/jbise.2015.82010 3,536 Downloads 5,716 Views Citations
Surface Roughness Quality and Dimensional Accuracy—A Comprehensive Analysis of 100% Infill Printed Parts Fabricated by a Personal/Desktop Cost-Effective FDM 3D Printer (Articles)

Mohammad S. Alsoufi, Abdulrhman E. Elsayed

Materials Sciences and Applications Vol.9 No.1, January 5, 2018

DOI: 10.4236/msa.2018.91002 5,313 Downloads 14,889 Views Citations
Characteristics of Biometallic Alloy to Additive Manufacturing Using Selective Laser Melting Technology (Articles)

Marcello Vertamatti Mergulhão, Maurício David Martins Das Neves

Journal of Biomaterials and Nanobiotechnology Vol.9 No.1, January 31, 2018

DOI: 10.4236/jbnb.2018.91008 1,872 Downloads 4,549 Views Citations
The Effects of Build Parameters and Strain Rate on the Mechanical Properties of FDM 3D-Printed Acrylonitrile Butadiene Styrene (Articles)

Kemar Hibbert, Grant Warner, Celeste Brown, Olusegun Ajide, Gbadebo Owolabi, Amin Azimi

Open Journal of Organic Polymer Materials Vol.9 No.1, January 31, 2019

DOI: 10.4236/ojopm.2019.91001 1,710 Downloads 4,811 Views Citations
Numerical Analysis and Modelling of a 100 N Hypergolic Liquid Bipropellant Thruster (Articles)

Grace Olileanya Ngwu, Benjamin Iyenagbe Ugheoke, Olatunbosun Tarfa Yusuf, Mopa Ashem Nyabam, Spencer Ojogba Onuh

Advances in Aerospace Science and Technology Vol.5 No.4, November 27, 2020

DOI: 10.4236/aast.2020.54006 1,003 Downloads 3,787 Views Citations
Mechanical Properties, Metallurgical Characteristics and Anisotropy of Additive Manufacturing of 316L (Articles)

D. Moreno, Y. Nahmana, O. Nafman, O. Kam, B. Wolfman, A. Y. Cohen, M. Shapira

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.2, March 31, 2022

DOI: 10.4236/jmmce.2022.102017 983 Downloads 2,603 Views Citations
Aspects of the Powder in Metal Additive Manufacturing: A Review (Articles)

Gladius Lewis

World Journal of Engineering and Technology Vol.10 No.2, May 25, 2022

DOI: 10.4236/wjet.2022.102022 1,018 Downloads 5,005 Views Citations

First <123 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies