Additive Manufacturing AM - Articles - Scientific Research Publishing

Quantitative Simulation Study of Metal Additive Manufacturing by Kinetic Monte Carlo (Articles)

Kepeng Ouyang, Youdi Kuang

Journal of Applied Mathematics and Physics Vol.10 No.5, May 18, 2022

DOI: 10.4236/jamp.2022.105110 355 Downloads 1,482 Views Citations
Effect of Acetone Vapor Smoothing Process on Surface Finish and Geometric Accuracy of Fused Deposition Modeling ABS Parts (Articles)

Viviane Pestano, Mariana Pohlmann, Fabio Pinto da Silva

Journal of Materials Science and Chemical Engineering Vol.10 No.10, October 24, 2022

DOI: 10.4236/msce.2022.1010001 392 Downloads 2,418 Views Citations
Characterization and Modeling of Mechanical Properties of Additively Manufactured Coconut Fiber-Reinforced Polypropylene Composites (Articles)

George Mosi, Bernard W. Ikua, Samuel K. Kabini, James W. Mwangi

Advances in Materials Physics and Chemistry Vol.14 No.6, June 21, 2024

DOI: 10.4236/ampc.2024.146008 256 Downloads 1,599 Views Citations
High Temperature Mechanical Properties of Additive Manufacturing CoCr F75 Alloy (Articles)

Daniel Moreno, Yohanan Nachmana, Matan Zakai, Omer Hollander, Ishai Alon, Elinor Itzhak, Moshe Shapira

Journal of Minerals and Materials Characterization and Engineering Vol.13 No.2, February 28, 2025

DOI: 10.4236/jmmce.2025.132003 179 Downloads 1,272 Views Citations
Finite Element Modeling and Validation of Submerged Arc Welding for Repairing 136RE Heavy Rails (Articles)

Arman Ali Mohammadi, Zhiyong Wang, Hualiang Teng

Journal of Transportation Technologies Vol.16 No.1, December 22, 2025

DOI: 10.4236/jtts.2026.161005 51 Downloads 346 Views Citations
High-Temperature Stress-Strain Behavior and Fractographic Characterization of Additively Manufactured Inconel 939 (Articles)

Daniel Moreno, Matan Zakai, Yohanan Nahmana, Ariel Y. Cohen, Moshe Shapira

Journal of Minerals and Materials Characterization and Engineering Vol.14 No.3, April 8, 2026

DOI: 10.4236/jmmce.2026.143006 76 Downloads 382 Views Citations
The Effect of Consumption on the Appearance of Closers Implemented by 3D Printer Technology (FDM) (Articles)

Sanaa Abdullah Alsiyami, Shadia Salah Salem

Journal of Textile Science and Technology Vol.8 No.4, September 16, 2022

DOI: 10.4236/jtst.2022.84014 339 Downloads 1,290 Views Citations
Recycled, Bio-Based, and Blended Composite Materials for 3D Printing Filament: Pros and Cons—A Review (Articles)

Khanh Q. Nguyen, Pascal Y. Vuillaume, Lei Hu, Jorge López-Beceiro, Patrice Cousin, Saïd Elkoun, Mathieu Robert

Materials Sciences and Applications Vol.14 No.3, March 10, 2023

DOI: 10.4236/msa.2023.143010 1,163 Downloads 7,544 Views Citations
Characterization of 3D Printed Poly(3-Hydroxybutyric-Co-3-Hydroxyvalerate) by Fused Granular Fabrication through Thermal and Mechanical Analyses (Articles)

Lok-Ching Wu, Cheng-Hao Lee, Yanming Wang, Yaohui Liu, Chi-Wai Kan

Journal of Materials Science and Chemical Engineering Vol.11 No.12, December 29, 2023

DOI: 10.4236/msce.2023.1112006 270 Downloads 908 Views Citations
Effect of Melt Scan Rate on Microstructure and Macrostructure for Electron Beam Melting of Ti-6Al-4V (Articles)

Karina Puebla, Lawrence E. Murr, Sara M. Gaytan, Edwin Martinez, Francisco Medina, Ryan B. Wicker

Materials Sciences and Applications Vol.3 No.5, May 22, 2012

DOI: 10.4236/msa.2012.35038 8,266 Downloads 13,272 Views Citations
Computer-Aided Design and Fabrication of Finger Prosthesis (Articles)

Takeshi Murayama, Kosei Oono, Mitsunori Tada, Toru Eguchi, Misuzu Nagami, Mitsuhiro Tamamoto

Journal of Biomedical Science and Engineering Vol.8 No.2, February 15, 2015

DOI: 10.4236/jbise.2015.82010 3,536 Downloads 5,718 Views Citations
Characteristics of Biometallic Alloy to Additive Manufacturing Using Selective Laser Melting Technology (Articles)

Marcello Vertamatti Mergulhão, Maurício David Martins Das Neves

Journal of Biomaterials and Nanobiotechnology Vol.9 No.1, January 31, 2018

DOI: 10.4236/jbnb.2018.91008 1,872 Downloads 4,550 Views Citations
The Effects of Build Parameters and Strain Rate on the Mechanical Properties of FDM 3D-Printed Acrylonitrile Butadiene Styrene (Articles)

Kemar Hibbert, Grant Warner, Celeste Brown, Olusegun Ajide, Gbadebo Owolabi, Amin Azimi

Open Journal of Organic Polymer Materials Vol.9 No.1, January 31, 2019

DOI: 10.4236/ojopm.2019.91001 1,710 Downloads 4,812 Views Citations
Numerical Analysis and Modelling of a 100 N Hypergolic Liquid Bipropellant Thruster (Articles)

Grace Olileanya Ngwu, Benjamin Iyenagbe Ugheoke, Olatunbosun Tarfa Yusuf, Mopa Ashem Nyabam, Spencer Ojogba Onuh

Advances in Aerospace Science and Technology Vol.5 No.4, November 27, 2020

DOI: 10.4236/aast.2020.54006 1,003 Downloads 3,800 Views Citations
Aspects of the Powder in Metal Additive Manufacturing: A Review (Articles)

Gladius Lewis

World Journal of Engineering and Technology Vol.10 No.2, May 25, 2022

DOI: 10.4236/wjet.2022.102022 1,020 Downloads 5,011 Views Citations
Application of Technology of Additive Manufacturing in Radiators and Heat Exchangers (Articles)

Chunhua Sun, Guangqing Shang

Journal of Power and Energy Engineering Vol.10 No.11, November 30, 2022

DOI: 10.4236/jpee.2022.1011003 428 Downloads 2,298 Views Citations
The Comparison of the Mechanical Characteristics of ABS Using Three Different Plastic Production Techniques (Articles)

Yousuf Pasha Shaik, Naresh Kumar Naidu, Venkat Reddy Yadavalli, Manish Reddy Muthyala

Open Access Library Journal Vol.10 No.5, May 24, 2023

DOI: 10.4236/oalib.1110097 490 Downloads 7,502 Views Citations
The Impact of Post-Processing Procedures on the Characteristics of the Additively Manufactured Resins: A Systematic Review (Articles)

Sara Benfaida, Mouna Hamza, Ahmed Benabdelaziz, EL Mehdi Jouhadi

Open Access Library Journal Vol.11 No.5, May 31, 2024

DOI: 10.4236/oalib.1111632 123 Downloads 887 Views Citations
Effect of Temperature Cycle on the Microhardness of ER4043 Deposited by Wire Arc Additive Manufacturing (Articles)

Nur Izan Syahriah Hussein, Mohamad Nizam Ayof, Gan Chin Ket, Ahmad Amirul Aizad Samsuri, Nor Ana Rosli, Jongkol Srithorn

Journal of Power and Energy Engineering Vol.13 No.11, November 27, 2025

DOI: 10.4236/jpee.2025.1311005 85 Downloads 452 Views Citations
Automated Light-Responsive Blinds Controller (Articles)

Andrew Barkman, Trevor Foster

World Journal of Engineering and Technology Vol.14 No.3, June 29, 2026

DOI: 10.4236/wjet.2026.143033 18 Downloads 253 Views Citations

First <123 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies