Stir casting - Articles - Scientific Research Publishing

Improvement in Tribological Properties of Surface Layer of an Al Alloy by Friction Stir Processing (Articles)

Soheyl Soleymani, Amir Abdollah-zadeh, Sima Ahamd Alidokht

Journal of Surface Engineered Materials and Advanced Technology Vol.1 No.3, October 18, 2011

DOI: 10.4236/jsemat.2011.13014 6,781 Downloads 12,156 Views Citations
Localization of Plastic Deformation in Copper Canisters for Spent Nuclear Fuel (Articles)

Kati Savolainen, Tapio Saukkonen, Hannu Hänninen

World Journal of Nuclear Science and Technology Vol.2 No.1, December 31, 2011

DOI: 10.4236/wjnst.2012.21003 5,392 Downloads 10,709 Views Citations
Influence of Microstructure and Experimental Parameters on Mechanical and Wear Properties of Al-TiC Surface Composite by FSP Route (Articles)

S. Jerome, S. Govind Bhalchandra, S.P. Kumaresh Babu, B. Ravisankar

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.5, May 18, 2012

DOI: 10.4236/jmmce.2012.115035 5,942 Downloads 8,059 Views Citations
Plastic Deformation Mechanisms of Base Material and Friction Stir Welded AZ31B-H24 Magnesium Alloy (Articles)

Michael Regev, Stefano Spigarelli

Materials Sciences and Applications Vol.4 No.6, May 30, 2013

DOI: 10.4236/msa.2013.46046 4,496 Downloads 7,635 Views Citations
Dynamic Behavior of Polycyclic Aromatic Hydrocarbons and Their Derivatives after Oils Spill in Water (Articles)

Pranudda Pimsee, Caroline Sablayrolles, Mireille Montréjaud-Vignoles, Julien Guyomarch, Nicolas Lesage, Pascale de Caro

Journal of Environmental Protection Vol.5 No.8, June 16, 2014

DOI: 10.4236/jep.2014.58069 3,721 Downloads 5,296 Views Citations
This article belongs to the Special Issue on Oil Pollution
Evaluation of Wear and Corrosion Properties of AA6061/TiB₂ Composites Produced by FSP Technique (Articles)

Dakarapu Santha Rao, Nallu Ramanaiah

Journal of Minerals and Materials Characterization and Engineering Vol.5 No.6, October 19, 2017

DOI: 10.4236/jmmce.2017.56029 1,420 Downloads 3,660 Views Citations
Optimization of Welding Parameters for Friction Stir Lap Welding of AA6061-T6 Alloy (Articles)

Rathinasuriyan Chandran, Sankar Ramaiyan, Avin Ganapathi Shanbhag, Senthil Kumar Velukkudi Santhanam

Modern Mechanical Engineering Vol.8 No.1, January 25, 2018

DOI: 10.4236/mme.2018.81003 1,960 Downloads 5,657 Views Citations
This article belongs to the Special Issue on Friction Stir Welding
Effect of Cooling Conditions on Mechanical and Microstructural Behaviours of Friction Stir Processed AZ31B Mg Alloy (Articles)

Sankar Ramaiyan, Rathinasuriyan Chandran, Senthil Kumar Velukkudi Santhanam

Modern Mechanical Engineering Vol.7 No.4, November 28, 2017

DOI: 10.4236/mme.2017.74010 2,010 Downloads 5,484 Views Citations
Microstructures and Properties of Recycled Composites – Particle Reinforced Iron Matrix Functionally Graded Materials Fabricated by Centrifugal Casting (Articles)

Yanpei Song, Shuangxu Bi, Xiuqing Li

Engineering Vol.2 No.5, May 31, 2010

DOI: 10.4236/eng.2010.25047 5,694 Downloads 10,371 Views Citations
Melt Infiltration Casting Of Zr₅₇Al₁₀Nb₅Cu_15.4Ni_12.6 Amorphous Matrix Composite (Articles)

K.Q. Qiu, Y.L. Ren

Journal of Minerals and Materials Characterization and Engineering Vol.3 No.2, October 20, 2004

DOI: 10.4236/jmmce.2004.32010 6,354 Downloads 8,041 Views Citations
Cardiorespiratory Effects of Derotational Casting during Anesthesia for Children with Early Onset Scoliosis (Articles)

Robin D. Jensen, Andrew F. Stasic, Shyam Kishan, Eric Scott, Deann M. Martin, Stephen F. Dierdorf

Open Journal of Anesthesiology Vol.4 No.2, January 29, 2014

DOI: 10.4236/ojanes.2014.42005 4,120 Downloads 6,303 Views Citations
Effects of Pressure on the Mechanical Properties and Microstructure of Die Cast Aluminum A380 Alloy (Articles)

Kenneth N. Obiekea, Shekarau Y. Aku, Danjuma S. Yawas

Journal of Minerals and Materials Characterization and Engineering Vol.2 No.3, May 28, 2014

DOI: 10.4236/jmmce.2014.23029 5,883 Downloads 9,933 Views Citations
Ultrasonic Fatigue of Ti₄₀Zr₁₀Cu₃₄Pd₁₄Sn₂ Glassy Alloy (Articles)

Shin-ichi Yamaura, Shengli Zhu, Katsuhiro Abe, Guoqiang Xie

Open Journal of Metal Vol.4 No.3, August 27, 2014

DOI: 10.4236/ojmetal.2014.43007 4,234 Downloads 5,638 Views Citations
Comparative Analysis of the Effects of Pressure on the Mechanical Properties and Microstructure of Die Cast Aluminum Alloys (Articles)

Kenneth N. Obiekea, Shekarau Y. Aku, Danjuma S. Yawas

Journal of Minerals and Materials Characterization and Engineering Vol.4 No.6, November 21, 2016

DOI: 10.4236/jmmce.2016.46029 1,884 Downloads 3,919 Views Citations
Evaluation of Mechanical and Microstructural Properties of α-Brass Alloy Produced from Scrap Copper and Zinc Metal through Sand Casting Process (Articles)

Edward E. Igelegbai, Oluwaseun A. Alo, Adefemi O. Adeodu, Ilesanmi A. Daniyan

Journal of Minerals and Materials Characterization and Engineering Vol.5 No.1, December 20, 2016

DOI: 10.4236/jmmce.2017.51002 4,297 Downloads 11,288 Views Citations
Practical Techniques for Restoration of Architectural Formation Elements in Historical Buildings (Articles)

Mahran Anwar

World Journal of Engineering and Technology Vol.7 No.1, February 14, 2019

DOI: 10.4236/wjet.2019.71013 1,798 Downloads 9,028 Views Citations
Modeling and Simulation of Heat Transfer Phenomenon Related to Mold Heating during Investment Casting (Articles)

Muhammad Musaddique Ali Rafique, Umair Shah

Engineering Vol.12 No.5, May 27, 2020

DOI: 10.4236/eng.2020.125024 942 Downloads 3,371 Views Citations
Thermodynamic Analysis of Al Alloy Reinforced with Zirconia Particles (Articles)

Ahmed Abdelkareem

Open Access Library Journal Vol.9 No.12, December 30, 2022

DOI: 10.4236/oalib.1109569 90 Downloads 1,012 Views Citations
Anchor-Shaped Design of a Submerged Entry Nozzle for the Continuous Casting of Steel (Articles)

Carlos A. Hernandez, Miguel A. Barron, Raul Miranda

Open Journal of Applied Sciences Vol.6 No.9, September 6, 2016

DOI: 10.4236/ojapps.2016.69058 2,345 Downloads 4,284 Views Citations
Elevated Temperatures Tensile Characteristics of Cast A356/Al₂O₃ Nanocomposites Fabricated Using a Combination of Rheocasting and Squeeze Casting Techniques (Articles)

El-Sayed Youssef El-Kady, Tamer Samir Mahmoud, Mohamed Abdel-Aziz Sayed

Materials Sciences and Applications Vol.2 No.5, May 5, 2011

DOI: 10.4236/msa.2011.25050 9,363 Downloads 17,004 Views Citations

First <123 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies