Cutting Sequence - Articles - Scientific Research Publishing

Improving Protein Sequence Classification Performance Using Adjacent and Overlapped Segments on Existing Protein Descriptors (Articles)

Mohammad Reza Faisal, Bahriddin Abapihi, Ngoc Giang Nguyen, Bedy Purnama, Mera Kartika Delimayanti, Dau Phan, Favorisen Rosyking Lumbanraja, Mamoru Kubo, Kenji Satou

Journal of Biomedical Science and Engineering Vol.11 No.6, June 29, 2018

DOI: 10.4236/jbise.2018.116012 1,252 Downloads 2,909 Views Citations
Using Gamma Emissions to Identify Cycles in the Lower Cambrian Monkton Formation (NW Vermont): Implications for Identifying Sea Level Variation on the Iapetus Margin (Articles)

Henry Maguire, Charlotte Mehrtens, Jonathan Kim, Edwin Romanowicz

Open Journal of Geology Vol.9 No.2, February 28, 2019

DOI: 10.4236/ojg.2019.92008 826 Downloads 1,854 Views Citations
Cutting and other forms of derma-abuse in adolescents (Articles)

Hari D. Maharajh, Rainah Seepersad

Health Vol.2 No.4, May 4, 2010

DOI: 10.4236/health.2010.24055 6,155 Downloads 12,705 Views Citations
Optimization of Surface Milling of Hardened AISI4340 Steel with Minimal Fluid Application Using a High Velocity Narrow Pulsing Jet of Cutting Fluid (Articles)

K. Leo Dev Wins, A. S. Varadarajan, B. Ramamoorthy

Engineering Vol.2 No.10, November 29, 2010

DOI: 10.4236/eng.2010.210102 5,425 Downloads 10,349 Views Citations
Deep-Sea Cobalt Crusts Water Jet Cutting Ability (Articles)

Zhonghua Huang, Ya Xie

Geomaterials Vol.1 No.2, July 29, 2011

DOI: 10.4236/gm.2011.12007 6,476 Downloads 11,396 Views Citations
Improvement Properties of the Cutting Tools Using Technical Plasma Treatment (Articles)

Ferkous Embarek, Amara Idriss, Djeribaa Abdeldjalil, Boughouas Hamlaoui, Achour Slimane

Materials Sciences and Applications Vol.2 No.10, October 17, 2011

DOI: 10.4236/msa.2011.210197 4,868 Downloads 8,499 Views Citations
Improved Balas and Mazzola Linearization for Quadratic 0-1 Programs with Application in a New CuttingPlane Algorithm (Articles)

Wajeb Gharibi

International Journal of Communications, Network and System Sciences Vol.5 No.4, April 19, 2012

DOI: 10.4236/ijcns.2012.54026 4,979 Downloads 7,703 Views Citations
Machinability Study of Al-5Cu-TiB₂ In-situ Metal Matrix Composites Fabricated by Flux-assisted Synthesis (Articles)

A. Mahamani

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.13, November 1, 2011

DOI: 10.4236/jmmce.2011.1013097 4,175 Downloads 6,723 Views Citations
Comparative Assessment on Machinability of Nano-Structured Bainitic Steel and Titanium64 (Articles)

Ashwin Polishetty, Chinmay Sonavane, Prasad Patil, Guy Littlefair

Journal of Materials Science and Chemical Engineering Vol.2 No.7, July 8, 2014

DOI: 10.4236/msce.2014.27004 2,624 Downloads 4,339 Views Citations
Heat Resistant Properties of Some Elements-Incorporated Diamond-Like Carbon Films and Their Trial Applications for Micro End Mill Coatings (Articles)

Chavin Jongwannasiri, Nutthanun Moolsradoo, Shuichi Watanabe

Materials Sciences and Applications Vol.6 No.1, January 7, 2015

DOI: 10.4236/msa.2015.61002 2,874 Downloads 4,024 Views Citations
Age Strengthening of Grey Cast Iron Alloys for Machine Cutting Tools Production (Articles)

A. I. Opaluwa, A. Oyetunji, S. O. Seidu

Journal of Minerals and Materials Characterization and Engineering Vol.3 No.3, March 31, 2015

DOI: 10.4236/jmmce.2015.33013 4,186 Downloads 5,918 Views Citations
Optimal Stochastic Pine Stands Harvest Rotation Policies (Articles)

Eduardo Navarrete

Open Journal of Forestry Vol.5 No.6, August 6, 2015

DOI: 10.4236/ojf.2015.56053 5,170 Downloads 6,380 Views Citations
This article belongs to the Special Issue on Future Forests
Determining the Effect of Cutting Fluids on Surface Roughness in Turning AISI 1330 Alloy Steel Using Taguchi Method (Articles)

Onyemachi Joachim Onuoha, James Oseni Abu, Sunday Albert Lawal, Edeki Mudiare, Michael Bolaji Adeyemi

Modern Mechanical Engineering Vol.6 No.2, May 5, 2016

DOI: 10.4236/mme.2016.62006 4,134 Downloads 7,639 Views Citations
Metal-Ceramic Smart Composite in Ti(C,N)-Ni-Mo-W System (Articles)

Z. Kovziridze, N. Nizharadze, G. Tabatadze, E. Nikoleishvili, M. Mshvildadze

Journal of Electronics Cooling and Thermal Control Vol.6 No.2, June 7, 2016

DOI: 10.4236/jectc.2016.62004 2,485 Downloads 3,843 Views Citations
Reproductive Development of Lotus tenuis (Fabaceae) Crop Defoliated at Different Times and Intensities (Articles)

Osvaldo R. Vignolio, Gustavo S. Cambareri, Lucas R. Petigrosso, Natalia Murillo, Néstor O. Maceira

American Journal of Plant Sciences Vol.7 No.8, June 7, 2016

DOI: 10.4236/ajps.2016.78113 2,220 Downloads 3,577 Views Citations
This article belongs to the Special Issue on Plant Reproduction
Planting Time Effects of Top-Shoot Cutting on Yield and Grade for Rapid Seed Potato Multiplication (Articles)

Md. Abdullah Al Mamun, Abdullah-Al Mahmud, Md. Shawquat Ali Khan, Md. Altaf Hossain, Mohammad Zakaria

Open Access Library Journal Vol.2 No.9, September 21, 2015

DOI: 10.4236/oalib.1101904 1,179 Downloads 2,778 Views Citations
Reverse Engineering Based Methodology for Redesigning Contour Milling Tools (Articles)

A. P. Valerga, M. Batista, J. Salguero, A. Gomez-Parra, M. Marcos

World Journal of Engineering and Technology Vol.4 No.3D, October 20, 2016

DOI: 10.4236/wjet.2016.43D025 1,526 Downloads 2,971 Views Citations
The Use of Genetic Approach to the Kinematics of Cutting (Articles)

Nabil Wanas Musa

World Journal of Mechanics Vol.6 No.10, October 25, 2016

DOI: 10.4236/wjm.2016.610028 1,745 Downloads 3,301 Views Citations
Study on the Role of Supersonic Nozzle in Fiber Laser Cutting of Stainless Steel (Articles)

Yijun Zhou, Jilan Kong, Jin Zhang

Materials Sciences and Applications Vol.8 No.1, January 11, 2017

DOI: 10.4236/msa.2017.81006 2,460 Downloads 5,259 Views Citations
This article belongs to the Special Issue on Materials Forming Technology
Development of a Procedure to Maximize Production of Hardy Rootstocks of Citrus Using Stem Cuttings (Articles)

Richard C. Beeson Jr., Dilma Silva

American Journal of Plant Sciences Vol.8 No.11, October 30, 2017

DOI: 10.4236/ajps.2017.811192 1,263 Downloads 2,704 Views Citations
This article belongs to the Special Issue on Tropical Vegetation

First <123 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies