Biodegradable Composites; Mechanical Properties; Water Sorption; Oil Sorption; Diesel Sorption - Articles

Chemical Extraction and Property Analyses of Marula Nut Oil for Biodiesel Production (Articles)

Jerekias Gandure, Clever Ketlogetswe

Advances in Chemical Engineering and Science Vol.1 No.3, July 22, 2011

DOI: 10.4236/aces.2011.13016 8,904 Downloads 17,772 Views Citations
Main Controlling Factors of Shale Oil Enrichment in Yanchang Formation of Yan’an Exploration Area (Articles)

Xingyuan Yan

Open Access Library Journal Vol.10 No.3, March 30, 2023

DOI: 10.4236/oalib.1109950 93 Downloads 716 Views Citations
Investigation of the Combination of Chicken Feathers and Polyhydroxyalkanoates for Sustainable and Biodegradable Composite Materials (Articles)

Nayan Vaghasiya, Jens Schuster, Chandrasekhar Kode

Open Journal of Composite Materials Vol.16 No.1, December 30, 2025

DOI: 10.4236/ojcm.2026.161001 73 Downloads 413 Views Citations
Research Analysis on the Microscopic Properties and Damping Performance of Carbon Nanomaterial-Modified Cement Mortar (Articles)

Bin Liu, Norhaiza Nordin, Jiyang Wang, Jingwei Wu, Xiuliang Liu

Engineering Vol.16 No.9, September 23, 2024

DOI: 10.4236/eng.2024.169020 127 Downloads 507 Views Citations
An Evaluation of the Physicochemical, Structural and Morphological Properties of Selected Tropical Wood Species for Possible Utilization in the Wood Industry (Articles)

Jude I. Duruaku, Patrick A. C. Okoye, Nkechi H. Okoye, Joseph O. Nwadiogbu, Valentine I. Onwukeme, Rosemary U. Arinze

Journal of Sustainable Bioenergy Systems Vol.13 No.4, October 31, 2023

DOI: 10.4236/jsbs.2023.134008 285 Downloads 1,072 Views Citations
Effect of Chemical Extraction on Physicochemical and Mechanical Properties of Doum Palm Fibres (Articles)

S. Zannen, L. Ghali, M. T. Halimi, M. Ben Hssen

Advances in Materials Physics and Chemistry Vol.4 No.10, October 23, 2014

DOI: 10.4236/ampc.2014.410024 4,993 Downloads 7,328 Views Citations
Assessing the Metal Recovery Value of Municipal Solid Waste Incineration Residues: Impact of Pretreatment on Fly Ash and Bottom Ash (Articles)

Pengfei Li, Takayuki Shimaoka

Journal of Geoscience and Environment Protection Vol.11 No.10, October 19, 2023

DOI: 10.4236/gep.2023.1110007 242 Downloads 1,116 Views Citations
Elaboration and Characterization of a Fiber Composite Material Made of Petioles of the Elaeis guineensis (Oil Palm) (Articles)

Ze Eric Parfait, Tchotang Théodore, Souck Joseph Loic, Nfor Clins Wiryikfu, Pondi Joseph, Mpoung Léon Arnaud

Open Journal of Composite Materials Vol.10 No.4, August 19, 2020

DOI: 10.4236/ojcm.2020.104008 704 Downloads 1,937 Views Citations
Numerical Study on Application of CuO-Water Nanofluid in Automotive Diesel Engine Radiator (Articles)

Navid Bozorgan, Komalangan Krishnakumar, Nariman Bozorgan

Modern Mechanical Engineering Vol.2 No.4, November 28, 2012

DOI: 10.4236/mme.2012.24017 9,148 Downloads 17,704 Views Citations
Fabrication and Characterizations of Mechanical Properties of Al-4.5%Cu/10TiC Composite by In-situ Method (Articles)

Anand Kumar, Manas Mohan Mahapatra, Pradeep Kumar Jha

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.11, November 30, 2012

DOI: 10.4236/jmmce.2012.1111113 7,529 Downloads 11,042 Views Citations
The Relative Viscosity of Concentrated Rubber Suspensions and Viscoelastic Modulus of 3D Сross-Linked Elastomers Filled with Solid Particles (Articles)

Alexandr Ermilov, Ergasch Nurullaev

Open Journal of Applied Sciences Vol.3 No.8, December 18, 2013

DOI: 10.4236/ojapps.2013.38057 2,940 Downloads 4,907 Views Citations
Microlayered Composite Materials on Basis of Copper, Refractory, Rare-Earth Metals, and Carbon for Electrical Contacts and Electrodes (Articles)

Victor Volodymyrovych Bukhanovsky, Mykola Petrovych Rudnytsky, Ilija Mamuzich

International Journal of Nonferrous Metallurgy Vol.3 No.2, April 16, 2014

DOI: 10.4236/ijnm.2014.32003 4,512 Downloads 6,803 Views Citations
Tensile Properties and Fractographic Analysis of Low Density Polyethylene Composites Reinforced with Chemically Modified Keratin-Based Biofibres (Articles)

Isiaka Oluwole Oladele, Jimmy Lolu Olajide, Okikiola Ganiyu Agbabiaka, Olawale Opeyemi Akinwumi

Journal of Minerals and Materials Characterization and Engineering Vol.3 No.4, July 23, 2015

DOI: 10.4236/jmmce.2015.34037 3,766 Downloads 5,528 Views Citations
Nonlinear and Rate-Dependent Hysteretic Responses of Active Hybrid Composites (Articles)

Chien-Hong Lin, Anastasia Muliana

Materials Sciences and Applications Vol.7 No.1, January 29, 2016

DOI: 10.4236/msa.2016.71006 4,813 Downloads 6,384 Views Citations
The Influence of Carbon Nanotubes and Nano-Silica Fume on Enhancing the Damping and Mechanical Properties of Cement-Based Materials (Articles)

Bin Liu, Norhaiza Nordin, Jiyang Wang, Jingwei Wu, Xiuliang Liu

Materials Sciences and Applications Vol.15 No.9, September 24, 2024

DOI: 10.4236/msa.2024.159027 130 Downloads 909 Views Citations
Wild Oregano Oil as a Potent Natural Antimicrobial Agent: Formulations of Oil-in-Water Emulsions (Articles)

Amra Bratovcic, Amela Becirovic

Journal of Biomaterials and Nanobiotechnology Vol.17 No.1, January 22, 2026

DOI: 10.4236/jbnb.2026.171002 60 Downloads 394 Views Citations
Mechanical Characteristics of Superaustenitic Stainless Steel Type 30Cr25Ni32Mo3 at Elevated Temperatures (Articles)

Gholam Reza Ebrahimi, Hamid Keshmiri, Hadi Arabshahi

Materials Sciences and Applications Vol.1 No.6, December 29, 2010

DOI: 10.4236/msa.2010.16047 7,496 Downloads 13,414 Views Citations
Carbon Nanotube Addition to Simultaneously Enhance Strength and Ductility of Hybrid AZ31/AA5083 Alloy (Articles)

Muralidharan Paramsothy, Manoj Gupta, Jimmy Chan, Richard Kwok

Materials Sciences and Applications Vol.2 No.1, January 25, 2011

DOI: 10.4236/msa.2011.21004 6,167 Downloads 11,727 Views Citations
Elevated Temperatures Tensile Characteristics of Cast A356/Al₂O₃ Nanocomposites Fabricated Using a Combination of Rheocasting and Squeeze Casting Techniques (Articles)

El-Sayed Youssef El-Kady, Tamer Samir Mahmoud, Mohamed Abdel-Aziz Sayed

Materials Sciences and Applications Vol.2 No.5, May 5, 2011

DOI: 10.4236/msa.2011.25050 9,303 Downloads 16,913 Views Citations
Tannin–Phenol Formaldehyde Resins As Binders for Cellulosic Fibers: Mechanical Properties (Articles)

A.S. Hussein, K.I. Ibrahim, K. M. Abdulla

Natural Resources Vol.2 No.2, June 17, 2011

DOI: 10.4236/nr.2011.22013 8,327 Downloads 17,172 Views Citations

First <...121314 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies