Cast Fe-Based Alloy - Articles - Scientific Research Publishing

EDM Studies on Aluminum Alloy-Silicon Carbide Composites Developed by Vortex Technique and Pressure Die Casting (Articles)

M. Kathiresan, T. Sornakumar

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.1, January 20, 2010

DOI: 10.4236/jmmce.2010.91007 9,382 Downloads 16,505 Views Citations
The Development of Mathematical Model for the Prediction of Ageing Behaviour for Al-Cu-Mg/Bagasse Ash Particulate Composites (Articles)

V.S. Aigbodion, S.B. Hassan, E.T. Dauda, R.A. Mohammed

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.10, October 20, 2010

DOI: 10.4236/jmmce.2010.910066 5,542 Downloads 7,705 Views Citations
Dry Sliding Wear Behaviour of SiC Particles Reinforced Zinc-Aluminium (ZA43) Alloy Metal Matrix Composites (Articles)

Rajaneesh N. Marigoudar, Kanakuppi Sadashivappa

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.5, April 20, 2011

DOI: 10.4236/jmmce.2011.105031 6,104 Downloads 9,150 Views Citations
Electrodeposited Cobalt-Iron Alloy Thin-Film for Potentiometric Hydrogen Phosphate-Ion Sensor (Articles)

Toru Kidosaki, Satoko Takase, Youichi Shimizu

Journal of Sensor Technology Vol.2 No.3, September 26, 2012

DOI: 10.4236/jst.2012.23014 6,267 Downloads 11,056 Views Citations
Effects of Salt Quenching Temperatures on Microstructure and Creep Properties of a PM Ni-based Superalloy (Articles)

Jun Xie, Sugui Tian, Jiao Liu, Xiaoming Zhou

Journal of Materials Science and Chemical Engineering Vol.1 No.1, February 7, 2013

DOI: 10.4236/msce.2013.11002 4,128 Downloads 9,650 Views Citations
Microstructure and Mechanical Properties of Medical Magnesium Alloy Fabricated by Unequal Channel Angular Pressing (Articles)

Xiaoping Luo, Mingang Zhang, Daqin Fang, Yaosheng Chai

Journal of Biomaterials and Nanobiotechnology Vol.4 No.2, April 17, 2013

DOI: 10.4236/jbnb.2013.42018 3,908 Downloads 5,967 Views Citations
Introduction of Compressive Residual Stress by Means of Cavitation Peening into a Titanium Alloy Rod Used for Spinal Implants (Articles)

Osamu Takakuwa, Amrinder S. Gill, Gokul Ramakrishnan, Seetha R. Mannava, Vijay K. Vasudevan, Hitoshi Soyama

Materials Sciences and Applications Vol.4 No.7B, July 18, 2013

DOI: 10.4236/msa.2013.47A2004 4,050 Downloads 6,967 Views Citations
This article belongs to the Special Issue on Surface Modification Technology and Research
Surface Modification on Ti-30Ta Alloy for Biomedical Application (Articles)

Patricia Capellato, Nicholas A. Riedel, John D. Williams, Joao P. B. Machado, Ketul C. Popat, Ana P. R. Alves Claro

Engineering Vol.5 No.9, August 22, 2013

DOI: 10.4236/eng.2013.59084 5,326 Downloads 8,543 Views Citations
Numerical Optimization of Sand Casting Parameters Using the Dantzig’s Simplex Method (Articles)

John Ogheneortega Oji, Simon Godenaan Datau, Kunle Joseph Akinluwade, Adeyinka Taofeek Taiwo, Dayo Adeyemi Isadare, Sunday Hendrix Pamtoks, Adelana Rasaki Adetunji

Journal of Minerals and Materials Characterization and Engineering Vol.1 No.5, September 13, 2013

DOI: 10.4236/jmmce.2013.15039 4,436 Downloads 6,586 Views Citations
Silver-Doped Layers of Implants Prepared by Pulsed Laser Deposition (Articles)

Tomas Kocourek, Miroslav Jelinek, Jan Miksovsky, Karel Jurek, Jaromir Kopecek

Journal of Computer and Communications Vol.1 No.7, December 2, 2013

DOI: 10.4236/jcc.2013.17014 3,370 Downloads 5,414 Views Citations
Mechanical and Machining Properties Analysis of Al6061-Cu-Reinforced SiC_P Metal Matrix Composite (Articles)

Serajul Haque, Prem Kumar Bharti, Akhtar Hussain Ansari

Journal of Minerals and Materials Characterization and Engineering Vol.2 No.1, January 17, 2014

DOI: 10.4236/jmmce.2014.21009 6,695 Downloads 9,429 Views Citations
Design Procedure and Simulation of a Novel Multi-Modal Tactile Display Device for Biomedical Applications (Articles)

Nader A. Mansour, Ahmed M. R. Fath El-Bab, Mohamed Abdellatif

Journal of Sensor Technology Vol.4 No.1, March 3, 2014

DOI: 10.4236/jst.2014.41002 4,131 Downloads 6,797 Views Citations
Microstructure and Shape Memory Effect of Cu-Zn-Ni Shape Memory Alloys (Articles)

Sathish S, U. S. Mallik, T. N. Raju

Journal of Minerals and Materials Characterization and Engineering Vol.2 No.2, March 14, 2014

DOI: 10.4236/jmmce.2014.22011 7,243 Downloads 10,580 Views Citations
Investigation on Microstructure and Grain Refining Performance of a New Type of Al-3Ti-1C Master Alloy (Articles)

Vahid Hassanbeygi, Ali Shafyei

Open Journal of Metal Vol.4 No.3, August 27, 2014

DOI: 10.4236/ojmetal.2014.43006 4,823 Downloads 6,278 Views Citations
Molecular Dynamics Simulation of Glass Forming Ability of Al₃₀Co₁₀Amorphous Alloy (Articles)

Chunping Fu, Lingtao Sun, Zhengfu Cheng

Open Journal of Applied Sciences Vol.5 No.9, September 29, 2015

DOI: 10.4236/ojapps.2015.59053 2,973 Downloads 4,566 Views Citations
Effect of Retrogression and Reaging on Stress Corrosion Cracking of Spray Formed Al Alloy (Articles)

Ruiming Su, Yingdong Qu, Xiang Li, Junhua You, Rongde Li

Materials Sciences and Applications Vol.7 No.1, January 28, 2016

DOI: 10.4236/msa.2016.71001 4,915 Downloads 6,843 Views Citations
PtAg Nanoparticle Electrocatalysts for the Glycerol Oxidation Reaction in Alkaline Medium (Articles)

Binh Thi Xuan Lam, Masanobu Chiku, Eiji Higuchi, Hiroshi Inoue

Advances in Nanoparticles Vol.5 No.3, July 25, 2016

DOI: 10.4236/anp.2016.53018 2,317 Downloads 4,072 Views Citations
The Alumina Film Nanomorphology Formed to Improve the Corrosion Resistance of Al-2.0 wt% Fe Alloy as Result of the Laser Surface Melting Technique Applied (Articles)

Moises Meza Pariona, Katieli Tives Micene

Advances in Chemical Engineering and Science Vol.7 No.1, December 21, 2016

DOI: 10.4236/aces.2017.71002 1,482 Downloads 2,702 Views Citations
Anodic Coating Characteristics of Different Aluminum Alloys for Spacecraft Materials Applications (Articles)

Afaf M. Abd El-Hameed, Yehia A. Abdel-Aziz, Fatma S. El-Tokhy

Materials Sciences and Applications Vol.8 No.2, February 8, 2017

DOI: 10.4236/msa.2017.82013 4,297 Downloads 9,761 Views Citations
Effect of Adding Sb on Microstructure, Mechanical Properties and in Vitro Degradation Behavior of as Cast Mg-4wt% Zn Alloy for Medical Application (Articles)

Hadeer I. Mohamed, Mohamed E. Moussa, Mohamed A. Waly, Gamilla S. Al-Ganainy, Aya B. Ahmed, Mona S. Talaat

Journal of Surface Engineered Materials and Advanced Technology Vol.7 No.4, October 26, 2017

DOI: 10.4236/jsemat.2017.74007 1,476 Downloads 3,176 Views Citations

First <...101112 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies