Tooth Wear - Articles - Scientific Research Publishing

In vitro evaluation of a new resilient, hard-carbon, thin-film coating as a bearing material for ventricular assist devices ——In Vitro Bearing Evaluation of BioMedFlex (Articles)

Nicole A. Mielke, Alex L. Massiello, David J. Horvath, Stephen M. Benefit, Darren Burgess, Leonard A. R. Golding, Kiyotaka Fukamachi

Journal of Biomedical Science and Engineering Vol.3 No.5, May 27, 2010

DOI: 10.4236/jbise.2010.35073 5,018 Downloads 9,499 Views Citations
Influence of Coolant in Machinability of Titanium Alloy (Ti-6Al-4V) (Articles)

Muthukrishnan Namb, Davim Paulo

Journal of Surface Engineered Materials and Advanced Technology Vol.1 No.1, March 17, 2011

DOI: 10.4236/jsemat.2011.11002 11,158 Downloads 23,600 Views Citations
High Pressure Water-Jet Technology for the Surface Treatment of Al-Si Alloys and Repercussion on Tribological Properties (Articles)

Md. Aminul Islam, Zoheir Farhat, Jonathon Bonnell

Journal of Surface Engineered Materials and Advanced Technology Vol.1 No.3, October 18, 2011

DOI: 10.4236/jsemat.2011.13017 6,727 Downloads 13,111 Views Citations
Application of a Computational Tool to Study the Influence of Worn Wheels on Railway Vehicle Dynamics (Articles)

João Pombo

Journal of Software Engineering and Applications Vol.5 No.2, February 27, 2012

DOI: 10.4236/jsea.2012.52009 9,207 Downloads 14,411 Views Citations
On the Wear Behavior of Cyanoacrylate in Presence of Nano-Sized SiO₂ (Articles)

Amir Yaghmaei, Seyed Mojtaba Zebarjad, Mehrdad Kashefi

Engineering Vol.4 No.5, May 24, 2012

DOI: 10.4236/eng.2012.45032 4,526 Downloads 7,673 Views Citations
Effect of Melting Temperature on the Wear Characteristics of Austenitic Manganese Steel (Articles)

S.A. Balogun, D.E. Esezobor, J.O. Agunsoye

Journal of Minerals and Materials Characterization and Engineering Vol.7 No.3, September 20, 2008

DOI: 10.4236/jmmce.2008.73021 13,564 Downloads 22,473 Views Citations
Dry Sliding Wear Behaviour of SiC Particles Reinforced Zinc-Aluminium (ZA43) Alloy Metal Matrix Composites (Articles)

Rajaneesh N. Marigoudar, Kanakuppi Sadashivappa

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.5, April 20, 2011

DOI: 10.4236/jmmce.2011.105031 6,104 Downloads 9,150 Views Citations
Tribological Behaviour of Aluminium/Alumina/Graphite Hybrid Metal Matrix Composite Using Taguchi’s Techniques (Articles)

N. Radhika, R. Subramanian, S. Venkat Prasat

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.5, April 20, 2011

DOI: 10.4236/jmmce.2011.105032 11,790 Downloads 19,968 Views Citations
Thermal Sprayed CNT Reinforced Nanocomposite Coatings – A Review (Articles)

Manoj Kumar Singla, Harpreet Singh, Vikas Chawla

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.8, June 27, 2011

DOI: 10.4236/jmmce.2011.108056 9,992 Downloads 14,773 Views Citations
Effect of Electrode Materials on Electric Discharge Machining of 316 L and 17 - 4 PH Stainless Steels (Articles)

Subramanian Gopalakannan, Thiagarajan Senthilvelan

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.7, July 25, 2012

DOI: 10.4236/jmmce.2012.117053 9,339 Downloads 13,840 Views Citations
Microstructure, Adhesion and Wear of Plasma Sprayed AlSi-SiC Composite Coatings (Articles)

Satish Tailor, V. K. Sharma, R. M. Mohanty, P. R. Soni

Journal of Surface Engineered Materials and Advanced Technology Vol.2 No.3A, July 27, 2012

DOI: 10.4236/jsemat.2012.223035 5,683 Downloads 10,192 Views Citations
This article belongs to the Special Issue on
Optimization of Friction and Wear Behaviour in Hybrid Metal Matrix Composites Using Taguchi Technique (Articles)

V. C. Uvaraja, N. Natarajan

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.8, August 20, 2012

DOI: 10.4236/jmmce.2012.118063 8,896 Downloads 12,611 Views Citations
Preparation & Characterization of Al-5083 Alloy Composites (Articles)

Sourabh Gargatte, Rahul R. Upadhye, Venkatesh S. Dandagi, Srikanth R. Desai, Bhimappa S. Waghamode

Journal of Minerals and Materials Characterization and Engineering Vol.1 No.1, January 26, 2013

DOI: 10.4236/jmmce.2013.11002 5,536 Downloads 9,432 Views Citations
Effect of rf Plasma Carbonitriding on the Biocompatibility and Mechanical Properties of AISI 321 Austenitic Stainless Steel (Articles)

F. M. El-Hossary, A. M. Abd El-Rahman, M. Raaif, A. A. Seleem, M. Abo El-Kassem

Advances in Materials Physics and Chemistry Vol.4 No.2, February 17, 2014

DOI: 10.4236/ampc.2014.42006 5,248 Downloads 8,209 Views Citations
Religious Wear (Uniforms) in Psychiatry (Articles)

Helen Bright

Open Journal of Psychiatry Vol.4 No.2, April 15, 2014

DOI: 10.4236/ojpsych.2014.42015 5,064 Downloads 7,666 Views Citations
Analysis of the Force Acting on the Sucker Rod by Polymer Solution (Articles)

Lili Liu, Shuren Yang, Lihui Wang, Di Xu, Liang Zhao, Yue Cui

Open Journal of Fluid Dynamics Vol.4 No.2, May 6, 2014

DOI: 10.4236/ojfd.2014.42009 3,545 Downloads 5,002 Views Citations
Optimization of Tribological Performance of Al-6061T6-15% SiCp-15% Al₂O₃ Hybrid Metal Matrix Composites Using Taguchi Method & Grey Relational Analysis (Articles)

Ashok Kr. Mishra, Vinod Kumar, Rajesh Kr. Srivastava

Journal of Minerals and Materials Characterization and Engineering Vol.2 No.4, July 30, 2014

DOI: 10.4236/jmmce.2014.24040 4,044 Downloads 5,552 Views Citations
Surface Modification of Parts Material Shape Memory TiNiCo with a View to Providing a Functional and Mechanical Property as a Factor in Resource (Articles)

Peter Olegovich Rusinov, Zhesfina Michailovna Blednova

Journal of Surface Engineered Materials and Advanced Technology Vol.4 No.6, October 10, 2014

DOI: 10.4236/jsemat.2014.46039 3,110 Downloads 4,247 Views Citations
This article belongs to the Special Issue on Surface and Interface of Materials
Influence of Equal Channel Angular Pressing on Tribological Properties of Low Carbon Steel (Fe-0,09C-0,64Si-,26Mn) (Articles)

P. G. Mordovskoi, S. P. Yakovleva, S. N. Maharova

Journal of Surface Engineered Materials and Advanced Technology Vol.5 No.1, January 6, 2015

DOI: 10.4236/jsemat.2015.51003 3,746 Downloads 4,776 Views Citations
This article belongs to the Special Issue on Surface and Interface of Materials
Optimum Combination of Femoral Head Size, Femoral Head Material, and Acetabular Cup Liner’s Highly-Cross-Linked Polyethylene Brand for Hip Implant (Articles)

Gladius Lewis, Daniel M. Werdofa

Journal of Biomedical Science and Engineering Vol.8 No.1, January 16, 2015

DOI: 10.4236/jbise.2015.81003 4,403 Downloads 6,018 Views Citations

First <...101112 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies