Additive Weibull Distribution - Articles - Scientific Research Publishing

Antioxidant and Immunopotentiating Effects of Cordyceps Mycelium Extract, Chicken Essence, and Their Combination in Experimental Models (Articles)

Hoi Yan Leung, Choly Tat Ming Yan, Kam Ming Ko

Chinese Medicine Vol.12 No.1, March 19, 2021

DOI: 10.4236/cm.2021.121001 704 Downloads 2,183 Views Citations
Inference Procedures on the Generalized Poisson Distribution from Multiple Samples: Comparisons with Nonparametric Models for Analysis of Covariance (ANCOVA) of Count Data (Articles)

Maha Al-Eid, Mohamed M. Shoukri

Open Journal of Statistics Vol.11 No.3, June 25, 2021

DOI: 10.4236/ojs.2021.113026 508 Downloads 2,280 Views Citations
Effect of Molasses Addition at Ensiling on Ruminal In Situ Dry Matter and Nutrient Degradation of Whole-Plant Soybean Silage Harvested at Different Phenological Stages (Articles)

Lucas Ghedin Ghizzi, Matheus Rebouças Pupo, Celso Heinzen Jr., Tiago Antônio Del Valle, Francisco Palma Rennó, Luiz Felipe Ferraretto

Agricultural Sciences Vol.13 No.2, February 25, 2022

DOI: 10.4236/as.2022.132018 369 Downloads 1,631 Views Citations
Mechanical Properties, Metallurgical Characteristics and Anisotropy of Additive Manufacturing of 316L (Articles)

D. Moreno, Y. Nahmana, O. Nafman, O. Kam, B. Wolfman, A. Y. Cohen, M. Shapira

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.2, March 31, 2022

DOI: 10.4236/jmmce.2022.102017 810 Downloads 2,368 Views Citations
Interpreting the Method of “Graphic Design” in the Birth of Modeling (Articles)

Jiahui Zang

Open Access Library Journal Vol.9 No.8, August 19, 2022

DOI: 10.4236/oalib.1109141 102 Downloads 814 Views Citations
The Effect of Consumption on the Appearance of Closers Implemented by 3D Printer Technology (FDM) (Articles)

Sanaa Abdullah Alsiyami, Shadia Salah Salem

Journal of Textile Science and Technology Vol.8 No.4, September 16, 2022

DOI: 10.4236/jtst.2022.84014 303 Downloads 1,222 Views Citations
Effects of Inclusion of Different Levels of Ethiopian Thyme (Thymus schimperi Ronniger) as Natural Additive on Chemical Composition and In Sacco Dry Matter Degradability of Total Mixed Ration and Feed Ingredients (Articles)

Feyissa Kera, Mengistu Urge, Getachew Animut, Adugna Tolera

Open Journal of Veterinary Medicine Vol.12 No.11, November 15, 2022

DOI: 10.4236/ojvm.2022.1211013 255 Downloads 1,220 Views Citations
Application of Technology of Additive Manufacturing in Radiators and Heat Exchangers (Articles)

Chunhua Sun, Guangqing Shang

Journal of Power and Energy Engineering Vol.10 No.11, November 30, 2022

DOI: 10.4236/jpee.2022.1011003 392 Downloads 2,182 Views Citations
Generalized Hyers-Ulam-Rassisa Type Stability of a Cauchy Additive (ξ₁,ξ₂)-Functional Inequalities with 3k-Variables in Complex Banach Space (Articles)

Ly Van An

Open Access Library Journal Vol.9 No.11, November 30, 2022

DOI: 10.4236/oalib.1109480 111 Downloads 939 Views Citations
Recycled, Bio-Based, and Blended Composite Materials for 3D Printing Filament: Pros and Cons—A Review (Articles)

Khanh Q. Nguyen, Pascal Y. Vuillaume, Lei Hu, Jorge López-Beceiro, Patrice Cousin, Saïd Elkoun, Mathieu Robert

Materials Sciences and Applications Vol.14 No.3, March 10, 2023

DOI: 10.4236/msa.2023.143010 1,118 Downloads 7,381 Views Citations
The Comparison of the Mechanical Characteristics of ABS Using Three Different Plastic Production Techniques (Articles)

Yousuf Pasha Shaik, Naresh Kumar Naidu, Venkat Reddy Yadavalli, Manish Reddy Muthyala

Open Access Library Journal Vol.10 No.5, May 24, 2023

DOI: 10.4236/oalib.1110097 475 Downloads 7,369 Views Citations
Optimization of Extrusion Process Parameters of Recycled High-Density Polyethylene-Thermoplastic Starch Composite for Fused Filament Fabrication (Articles)

Grace Njeri Wamuti, James Wamai Mwangi, Samuel Kabini Karanja, Leif Micke, Henning Zeidler

Open Journal of Composite Materials Vol.13 No.4, September 25, 2023

DOI: 10.4236/ojcm.2023.134006 343 Downloads 1,749 Views Citations
Global Dynamics Analysis of a Cholera Transmission Model with General Incidence and Multiple Modes of Infection (Articles)

Daijun Li, Lianwen Wang

Journal of Applied Mathematics and Physics Vol.11 No.11, November 30, 2023

DOI: 10.4236/jamp.2023.1111236 243 Downloads 723 Views Citations
Characterization of 3D Printed Poly(3-Hydroxybutyric-Co-3-Hydroxyvalerate) by Fused Granular Fabrication through Thermal and Mechanical Analyses (Articles)

Lok-Ching Wu, Cheng-Hao Lee, Yanming Wang, Yaohui Liu, Chi-Wai Kan

Journal of Materials Science and Chemical Engineering Vol.11 No.12, December 29, 2023

DOI: 10.4236/msce.2023.1112006 227 Downloads 833 Views Citations
The Impact of Post-Processing Procedures on the Characteristics of the Additively Manufactured Resins: A Systematic Review (Articles)

Sara Benfaida, Mouna Hamza, Ahmed Benabdelaziz, EL Mehdi Jouhadi

Open Access Library Journal Vol.11 No.5, May 31, 2024

DOI: 10.4236/oalib.1111632 121 Downloads 854 Views Citations
On-the-Go Prediction of Soil pH Using Generalized Additive Models in Mississippi Delta: A Case Study (Articles)

Reginald S. Fletcher

Open Journal of Soil Science Vol.15 No.4, April 2, 2025

DOI: 10.4236/ojss.2025.154011 128 Downloads 976 Views Citations
Growth, Haematogical and Economic Response of Clarias gariepinus (Burchell, 1822) Juveniles to Lemon Grass (Cymbopogon citratus) as Feed Additive (Articles)

Divine Ewane, Judith Georgette Makombu, Fidelis Narika Ambeno, Aamon Alex Wirngo, Bertha Anyizi Nkemnyi, Mbeng Ashu Arrey

Open Journal of Animal Sciences Vol.15 No.3, July 30, 2025

DOI: 10.4236/ojas.2025.153019 98 Downloads 540 Views Citations
The Mean Treatment Effect Was Estimated Using a Machine-Learning Model: Evidence from the ECLS-K Dataset (Articles)

Shenshuo Zhang

Journal of Data Analysis and Information Processing Vol.13 No.3, August 28, 2025

DOI: 10.4236/jdaip.2025.133023 66 Downloads 421 Views Citations
Effect of Temperature Cycle on the Microhardness of ER4043 Deposited by Wire Arc Additive Manufacturing (Articles)

Nur Izan Syahriah Hussein, Mohamad Nizam Ayof, Gan Chin Ket, Ahmad Amirul Aizad Samsuri, Nor Ana Rosli, Jongkol Srithorn

Journal of Power and Energy Engineering Vol.13 No.11, November 27, 2025

DOI: 10.4236/jpee.2025.1311005 70 Downloads 375 Views Citations
Applications of Allophane in Mortars and Asphalts: Predictive Modeling and Improvement of Physical-Mechanical Properties (Articles)

Edward Henry Jiménez, Lisbeth Maribel Delgado, Paola Elizabeth Vera, Juan Humberto Villalba, José Bermudez, Jorge Santamaria, Alexis Martial Debut, Marlown Cuenca, Karina Jácome

Advances in Materials Physics and Chemistry Vol.16 No.2, February 24, 2026

DOI: 10.4236/ampc.2026.162005 67 Downloads 524 Views Citations

First <...101112 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies