Tool Steel - Articles - Scientific Research Publishing

Wootz: Cast Iron or Steel? (Articles)

D. A. Sukhanov, N. V. Plotnikova

Materials Sciences and Applications Vol.7 No.11, November 29, 2016

DOI: 10.4236/msa.2016.711061 2,134 Downloads 5,573 Views Citations
Influence of Deep Cryogenic Treatment (DCT) on Thermo Mechanical Performance of AISI H13 Tool Steel (Articles)

Valmik Bhawar, Shreyans Khot, Prakash Kattire, Mohan Mehta, Rajkumar Singh

Journal of Materials Science and Chemical Engineering Vol.5 No.1, January 16, 2017

DOI: 10.4236/msce.2017.51013 4,224 Downloads 6,552 Views Citations
Study of Electroslag Remelted and Nitrogen Containing High Speed Tool Steel M41 (Articles)

S. A. El Badry, Hossam Halfa, A. Ahmed, A. G. Moustafa

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.1, January 20, 2010

DOI: 10.4236/jmmce.2010.91001 5,443 Downloads 7,124 Views Citations
Ion and Gas Nitriding Applied to Steel Tool for Hot Work X38CrMoV5 Nitriding Type: Impact on the Wear Resistance (Articles)

S. Ben Slima

Materials Sciences and Applications Vol.3 No.9, September 27, 2012

DOI: 10.4236/msa.2012.39093 6,040 Downloads 8,973 Views Citations
Influence of Shot Peening on DIN 1.2714 Hot Work Tool Steel (Articles)

Valmik Bhavar, Sachin V. Patil, Prakash Kattire, P. P. Date, R. K. P. Singh

Journal of Materials Science and Chemical Engineering Vol.5 No.1, January 16, 2017

DOI: 10.4236/msce.2017.51012 3,686 Downloads 6,004 Views Citations
Influence of the Distribution of Excess Carbide on the Properties of Genuine Damascus Steel (Articles)

Dmitry Sukhanov, Nataliya Plotnikova

Materials Sciences and Applications Vol.10 No.2, January 30, 2019

DOI: 10.4236/msa.2019.102010 1,693 Downloads 4,317 Views Citations
Influence of Cutting Speed, Feed Rate and Bulk Texture on the Surface Finish of Nitrogen Alloyed Duplex Stainless Steels during Dry Turning (Articles)

D. Philip Selvaraj, P. Chandramohan

Engineering Vol.2 No.6, July 1, 2010

DOI: 10.4236/eng.2010.26059 9,327 Downloads 16,576 Views Citations
The Effect of Heat Treatment Atmosphere on Hardening of Surface Region of H13 Tool Steel (Articles)

Timotius Pasang, Zhan Chen, Maziar Ramezani, Thomas Neitzert, Dominique Au

Journal of Materials Science and Chemical Engineering Vol.1 No.6, November 13, 2013

DOI: 10.4236/msce.2013.16004 6,802 Downloads 11,678 Views Citations
Electroslag Remelting of High Technological Steels (Articles)

Hossam Halfa, A. M. Reda

Journal of Minerals and Materials Characterization and Engineering Vol.3 No.6, November 9, 2015

DOI: 10.4236/jmmce.2015.36047 5,611 Downloads 7,443 Views Citations
Some Features of the Influence of Titanium and Nitrogen Addition to NiCrMoV Steel (Articles)

Saeed Ghali, Mamdouh Eissa, Michael Mishreky

Journal of Minerals and Materials Characterization and Engineering Vol.6 No.2, March 20, 2018

DOI: 10.4236/jmmce.2018.62015 1,120 Downloads 2,634 Views Citations
Determination of the Friction Coefficient in the Flat Strip Drawing Test (Articles)

Anvar Makhkamov

Engineering Vol.13 No.11, November 29, 2021

DOI: 10.4236/eng.2021.1311043 378 Downloads 1,958 Views Citations
Intelligent Tool Management Strategies for Automated Manufacturing Systems (Articles)

D. Ganeshwar Rao, C. Patvardhan, Ranjit Singh

Intelligent Control and Automation Vol.2 No.4, November 3, 2011

DOI: 10.4236/ica.2011.24046 6,636 Downloads 10,739 Views Citations
Design of Bibliographic Data Management Tool for Small Book Corners (Articles)

Yuhan Cai

Open Access Library Journal Vol.10 No.12, December 29, 2023

DOI: 10.4236/oalib.1110989 72 Downloads 475 Views Citations
Influence of Morphology Pattern of Genuine Damascus Steel on the Nature of Relief of Fracture Surfaces (Articles)

Dmitry A. Sukhanov

Materials Sciences and Applications Vol.13 No.7, July 6, 2022

DOI: 10.4236/msa.2022.137027 316 Downloads 2,256 Views Citations
New Ways to Address Competition Challenges in Digital Markets: Reflections and Enlightenment of the EU’s Proposal for a New Competition Tool (Articles)

Qichao Dong

Beijing Law Review Vol.14 No.3, September 21, 2023

DOI: 10.4236/blr.2023.143075 293 Downloads 1,149 Views Citations
Simulation-Based Analysis and Intuitive Visualization of the Cutting Edge Load in Micromilling of Hardened Steel (Articles)

Petra Kersting, Dirk Biermann, Eugen Krebs

Engineering Vol.4 No.9, September 28, 2012

DOI: 10.4236/eng.2012.49068 5,306 Downloads 7,892 Views Citations
An Automatic Cross-System File Generation System for Biological Network Visualization Tools (Articles)

Tianhan Zhang, Xun Lu

Applied Mathematics Vol.5 No.19, November 12, 2014

DOI: 10.4236/am.2014.519296 3,724 Downloads 4,803 Views Citations
This article belongs to the Special Issue on Mathematical Biology
Development and Validation Analysis of Redeemer’s University Alexithymia Scale (RUNAS) (Articles)

Ibukunoluwa Busayo Bello, Ebenezer Olutope Akinnawo, Bede Chinonye Akpunne, Abayomi Olubanjo Olusa

Psychology Vol.13 No.3, March 31, 2022

DOI: 10.4236/psych.2022.133031 351 Downloads 1,405 Views Citations
Implementing a Patient Acuity Tool to Address Fair Nursing Assignments (Articles)

Tonny Mao

Open Journal of Nursing Vol.15 No.8, August 14, 2025

DOI: 10.4236/ojn.2025.158043 158 Downloads 1,424 Views Citations
EVA as Superior Performance Measurement Tool (Articles)

Abdullah Al Mamun, Harry Entebang, Shazali Abu Mansor

Modern Economy Vol.3 No.3, May 22, 2012

DOI: 10.4236/me.2012.33041 16,737 Downloads 27,850 Views Citations

First <12 3 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies